| Skip Navigation Links | |
| Exit Print View | |
|
Sun Blade X6275 M2 Server Module Service Manual |
About This Documentation (PDF and HTML)
Server Module and Components Overview
About the Sun Blade 6000 Modular System Chassis
Powering On and Off the Server Module
Preparation Procedures for Service and Operation
Preparing the Server for Service
Preparing the Server for Operation
Component Removal and Installation Procedures
Removing and Installing Flash Modules
Removing and Installing the Energy Storage Modules
Removing and Installing the Service Processor Board
Removing and Installing USB Flash Drives
Removing and Installing a CPU and Heatsink Assembly
How to Replace the Motherboard Assembly
Diagnostic and Maintenance Information and Procedures
Diagnosing Server Module Hardware Faults
BIOS Power-On Self-Test (POST) Codes
How BIOS POST Memory Testing Works
How to View BIOS POST Codes Using the Web Interface
How to View BIOS POST Codes Using the CLI
Server Module Maintenance Procedures and Information
Before You Begin
See About the BIOS Setup Utility.
The BIOS Main Menu screen appears.
The Boot Settings screen appears.
The Boot Settings Configuration screen appears.
Quick Boot: This option is enabled by default. The BIOS skips certain tests while booting, such as the extensive memory test. This decreases the time it takes for the system to boot.
Quiet Boot: This option is disabled by default. If you enable this option, the Sun Microsystems logo appears instead of POST codes.
Wait for F1 if Error: This option is enabled by default. The system pauses if an error is found during POST and only resumes when you press the F1 key.
Retry Boot List: Automatically retries the boot list when all devices have failed. This option is enabled by default.
IB gPXE Boot First: Sets the on-board Infiniband gPXE to always boot first. This option is disabled by default.
|