Skip Navigation Links | |
Exit Print View | |
System Administration Guide: IP Services Oracle Solaris 11 Express 11/10 |
1. Planning an IPv4 Addressing Scheme (Tasks)
2. Planning an IPv6 Addressing Scheme (Overview)
3. Planning an IPv6 Network (Tasks)
4. Configuring TCP/IP Network Services and IPv4 Addressing (Tasks)
5. Enabling IPv6 on a Network (Tasks)
6. Administering a TCP/IP Network (Tasks)
8. Troubleshooting Network Problems (Tasks)
9. TCP/IP and IPv4 in Depth (Reference)
12. Planning for DHCP Service (Tasks)
Configuring and Unconfiguring a DHCP Server Using DHCP Manager
How to Configure a DHCP Server (DHCP Manager)
Configuring BOOTP Relay Agents
How to Configure a BOOTP Relay Agent (DHCP Manager)
Unconfiguring DHCP Servers and BOOTP Relay Agents
DHCP Data on an Unconfigured Server
How to Unconfigure a DHCP Server or a BOOTP Relay Agent (DHCP Manager)
Configuring and Unconfiguring a DHCP Server Using dhcpconfig Commands
How to Configure a DHCP Server (dhcpconfig -D)
How to Configure a BOOTP Relay Agent (dhcpconfig -R )
How to Unconfigure a DHCP Server or a BOOTP Relay Agent (dhcpconfig -U)
14. Administering DHCP (Tasks)
15. Configuring and Administering the DHCP Client
16. Troubleshooting DHCP (Reference)
17. DHCP Commands and Files (Reference)
18. IP Security Architecture (Overview)
20. IP Security Architecture (Reference)
21. Internet Key Exchange (Overview)
23. Internet Key Exchange (Reference)
24. IP Filter in Oracle Solaris (Overview)
Part IV Networking Performance
26. Integrated Load Balancer Overview
27. Configuration of Integrated Load Balancer Tasks
28. Virtual Router Redundancy Protocol (Overview)
29. VRRP Configuration (Tasks)
30. Implementing Congestion Control
Part V IP Quality of Service (IPQoS)
31. Introducing IPQoS (Overview)
32. Planning for an IPQoS-Enabled Network (Tasks)
33. Creating the IPQoS Configuration File (Tasks)
34. Starting and Maintaining IPQoS (Tasks)
35. Using Flow Accounting and Statistics Gathering (Tasks)
When you configure the DHCP service on your network, you configure and start the first DHCP server. Other DHCP servers can be added later and can access the same data from a shared location if the data store supports shared data. This chapter describes tasks that enable you to configure the DHCP server and place networks and their associated IP addresses under DHCP management. This chapter also explains how to unconfigure a DHCP server.
Each task includes a procedure to help you perform the task in DHCP Manager and a procedure for the equivalent task with the dhcpconfig utility. This chapter contains the following information:
Configuring and Unconfiguring a DHCP Server Using DHCP Manager
Configuring and Unconfiguring a DHCP Server Using dhcpconfig Commands
If you experience problems configuring the DHCP service, see Chapter 16, Troubleshooting DHCP (Reference).
After you configure the DHCP service, see Chapter 14, Administering DHCP (Tasks) for information about managing the DHCP service.