| |
100
| No controllers available.
|
101
| Controller does not support RAID.
|
102
| No physical disks associated with controller.
|
103
| Invalid controller.
|
104
| Invalid disk.
|
105
| Invalid RAID volume.
|
106
| RAID level not supported by controller.
|
107
| Default RAID level not supported.
|
108
| A defined disk is in use.
|
109
| Number of disks exceeds allowed number for this level.
|
110
| Failure retrieving internal data.
|
111
| Number of disks requested exceeds the number of available disks.
|
112
| Cannot define both actual and requested number of disks.
|
113
| Option not supported by controller.
|
114
| Invalid stripe size for controller.
|
115
| Invalid number of subarrays.
|
116
| Cannot retrieve RAID data.
|
118
| RAID creation failure.
|
119
| RAID deletion failure.
|
120
| Disk defined multiple times.
|
121
| Disks must be in the same controller.
|
122
| The maximum number of RAID Volumes has been created.
|
123
| Invalid RAID configuration.
|
124
| The RAID Volume is in use.
|
125
| Incomplete RAID configuration.
|
126
| Failure writing internal data.
|
127
| Command requires disks to be entered.
|
128
| Disk is not a dedicated spare.
|
129
| Disk is not a global spare.
|
130
| Controller does not support dedicated spares.
|
131
| Controller does not support global spares.
|
132
| Command requires disks or RAID volume to be entered.
|
133
| A defined disk is not in a RAID volume.
|
134
| Cannot set both read and write cache in same command.
|
135
| Import could not create RAID volumes or spares - disks may be
in use.
|
136
| Subarrays option is required for this RAID level.
|
137
| Incomplete command, no options have been supplied.
|
138
| Number of disks requested exceeds the number of available disks
with the same capacity.
|
139
| RAID configuration does not have enough disks for the requested
RAID level.
|
140
| RAID configuration has too many disks for the requested RAID
level.
|
141
| Disk detected as in use by another controller. Use raidconfig
restore or clear command.
|
142
| The number of spares exceeds the maximum allowed by controller.
|
143
| This command does not support the number-disks option.
|
144
| Task type is invalid.
|
145
| Task type must be defined.
|
146
| Task type is only valid for disks.
|
147
| Task type is only valid for RAID Volumes.
|
148
| For this task, disk must not be in use.
|
149
| For this task, disk must be in a RAID Volume.
|
150
| Command currently cannot be executed.
|
151
| The source disk must be in a RAID Volume.
|
152
| The destination disk must not be in a RAID Volume.
|
153
| The source and destination cannot be the same disk.
|
154
| No foreign configuration detected for controller.
|
155
| Unable to add disk to RAID Volume.
|
156
| Task cannot be started, make sure task is listed in Startable
Tasks.
|
157
| Task cannot be stopped, make sure task is listed in Stoppable
Tasks.
|
158
| Invalid command, filename must come before options.
|
159
| All disks must be the same size.
|
160
| Command is not valid for this RAID level.
|
161
| Subdisk sizes must be less than disk capacity.
|
162
| Could not restore controller configuration.
|