The following lists the release history of this documentation set:
July 2011 – Initial publication.
October 2011 – Revised for SW release 1.1.
April 2012 – Revised to add preinstalled Oracle VM, and additional rack mounting instructions.
June 2012 – Revided for SW release 1.1.1. Revised to add the preinstalled Oracle Solaris 11 operating system.
July 2012 – Revised to change the product name to Sun Server X2–8 and to add 32 GB DIMM support.
September 2012 – Added firmware versions to Product Notes.
December 2012 – Revised for SW release 1.1.2. Added support for dual-ranked and quad-ranked 16 GB DIMMs.
December 2012 – Removed erroneous listing of Windows Server 2008 pre-R2 as a supported OS. For Microsoft Windows, only Windows Server 2008 R2 SP1 is supported.
January 2013 – Minor edit to Service Manual and Product Notes for memory DIMM population rules.
January 2013 – Minor editorial corrections to Product Notes and Service Manual.
March 2013 – Support for Windows Server 2012 added to Product Notes. Installation Guide revised to add the preinstalled Oracle Linux operating system.
July 2013 – Revised for SW release 1.2. Updated information in Product Notes on operating system support, finding Windows Server 2008 drivers, and new CRs. Updated Service Manual to add procedure animation links and make minor editorial changes.
August 2013 – Revised Installation Guide and Oracle ILOM Supplement to add information about changing the default Oracle ILOM password.
October 2013 – Revised Windows Installation Guide to add Windows Server 2012.
November 2013 – Revised Product Notes to add information about support for six InfiniBand CX-2 PCIe EMs.
March 2014 – Added updates for SW release 1.2.1.
July 2014 – Added change to BIOS section to indicate that the Auto Boot Host On Power Loss control is deactivated.
September 2014 – Added updates for SW release 1.2.3.