Skip Navigation Links | |
Exit Print View | |
SAS-1/SAS-2 Compatibility Upgrade Guide For the Sun Blade 6000 Modular System |
System Requirements for the SAS-1/SAS-2 Compatibility Upgrade
List of SAS-1 Server Modules That Are Compatible With SAS-2 Upgrade
Upgrading Disk Module and SAS-NEM Expander Firmware
Obtain the Latest Disk Module and SAS-NEM Expander Firmware for SAS-1/SAS-2 Coexistence
Obtain the Firmware Update Utility to Deploy the Required Expander Firmware
Upgrade Disk Module and SAS-NEM Firmware Using the fwupdate Utility
Where to Obtain the lsiutil Software
Using lsiutil From the Command Line
Using the Interactive lsiutil Menus
Why Save LSI Host Bus Adapter Persistent Mappings?
When to Save LSI Host Bus Adapter Persistent Mappings
Saving and Restoring a Persistence Map
Save a Snapshot of Your Host Bus Adapter Persistent Mappings
Restore a Snapshot of Your Host Bus Adapter Persistent Mappings
This document provides information on compatibility requirements for a server module with a SAS-2 RAID Expansion Module (REM) in a Sun Blade 6000 Modular System chassis that has SAS-1 Network Express Modules (NEMs), or SAS-1 NEMs and Sun Blade 6000 Disk Modules (which are SAS-1 devices).
You must perform the firmware upgrade procedure in this document before inserting your server module with a SAS-2 REM into a SAS-1 system chassis.
Note - Refer to your device’s documentation to determine its SAS level. Alternatively, you can identify SAS-1 and SAS-2 devices by the maximum data transfer speeds supported by the devices. SAS-1 devices support a maximum data transfer speed of 3 Gb per second. SAS-2 devices support a maximum data transfer speed of 6 Gb per second.
The following topics are covered: