Power On the Server
As soon as the power cords are connected, standby power is applied. In
standby power mode, the Power/OK LED on the server front panel blinks steadily.
Depending on the configuration of the firmware, the system might boot. If it
does not, follow this procedure.
- Power on the server by performing one of the following actions:
Press the Power button on the front bezel.
Log in to the Oracle ILOM SP, and type the following command at the Oracle ILOM prompt.
-> start /System
When main power is applied to the server, the green Power/OK LED on the front panel of the server lights and remains lit.