|Oracle® Database Backup and Recovery User's Guide
11g Release 2 (11.2)
Part Number E10642-04
|PDF · Mobi · ePub|
This chapter explains Flashback Database, restore points. This chapter discusses configuring, monitoring, and maintaining these features as part of an overall data protection strategy.
This chapter contains the following topics:
See Also:Detailed information on recovery scenarios that use Flashback Database and normal and guaranteed restore points can be found in Chapter 18, "Performing Flashback and Database Point-in-Time Recovery".
Oracle Flashback Database and restore points are related data protection features that allow you to rewind data back in time to correct any problems caused by logical data corruption or user errors within a designated time window. These features provide a more efficient alternative to point-in-time recovery and does not require a backup of the database to be restored first. The effects are similar to database point-in-time recovery (DBPITR). Flashback Database and restore points are not only effective in traditional database recovery situations but can also be useful during database upgrades, application deployments and testing scenarios when test databases must be quickly created and recreated. Flashback Database also provides an efficient alternative to rebuilding a failed primary database after a Data Guard failover.
Restore points provide capabilities related to Flashback Database and other media recovery operations. In particular, a guaranteed restore point created at an system change number (SCN) ensures that you can use Flashback Database to rewind the database to this SCN. You can use restore points and Flashback Database independently or together.
Flashback Database is accessible through the RMAN command
DATABASE or the SQL statement
DATABASE. You can use either command to quickly recover the database from logical data corruption or user errors. The following examples return the database to a specified SCN or restore point:
FLASHBACK DATABASE TO RESTORE POINT 'before_upgrade'; FLASHBACK DATABASE TO SCN 202381;
Flashback Database is accessible through the RMAN command and SQL statement
FLASHBACK DATABASE. You can use either command to quickly recover the database from logical data corruptions or user errors.
Flashback Database is similar to conventional point-in-time recovery in its effects. It enables you to return a database to its state at a time in the recent past. Flashback Database is much faster than point-in-time recovery because it does not require restoring datafiles from backup and requires applying fewer changes from the archived redo logs.
You can use Flashback Database to reverse most unwanted changes to a database if the datafiles are intact. You can return a database to its state in a previous incarnation, and undo the effects of an
ALTER DATABASE OPEN RESETLOGS statement. "Rewinding a Database with Flashback Database" explains how to use the
DATABASE command to reverse database changes.
Flashback Database uses its own logging mechanism, creating flashback logs and storing them in the fast recovery area. You can only use Flashback Database if flashback logs are available. To take advantage of this feature, you must set up your database in advance to create flashback logs.
To enable Flashback Database, you configure a fast recovery area and set a flashback retention target. This retention target specifies how far back you can rewind a database with Flashback Database.
From that time onwards, at regular intervals, the database copies images of each altered block in every datafile into the flashback logs. These block images can later be reused to reconstruct the datafile contents for any moment at which logs were captured.
When you use Flashback Database to rewind a database to a past target time, the command determines which blocks changed after the target time and restores them from the flashback logs. The database restores the version of each block that is immediately prior to the target time. The database then uses redo logs to reapply changes that were made after these blocks were written to the flashback logs.
Redo logs on disk or tape must be available for the entire time period spanned by the flashback logs. For example, if the flashback retention target is 1 week, then you must ensure that online and archived redo logs that contain all changes for the past week are accessible. In practice, redo logs are typically needed much longer than the flashback retention target to support point-in-time recovery.
The range of SCNs for which there is currently enough flashback log data to support the
DATABASE command is called the flashback database window. The flashback database window cannot extend further back than the earliest SCN in the available flashback logs.
Note:Some database operations, such as dropping a tablespace or shrinking a datafile, cannot be reversed with Flashback Database. See "Limitations of Flashback Database" for details.
You cannot back up flashback logs to locations outside the fast recovery area. To increase the likelihood that enough flashback logs are retained to meet the flashback database window, you can increase the space in your fast recovery area (see "Initialization Parameters for the Fast Recovery Area").
If the fast recovery area is not large enough to hold the flashback logs and files such as archived redo logs and other backups needed for the retention policy, then the database may delete flashback logs from the earliest SCNs forward to make room for other files. Consequently, the flashback database window can be shorter than the flashback retention target, depending on the size of the fast recovery area, other backups that must be retained, and how much flashback logging data is needed. The flashback retention target is a target, not a guarantee that Flashback Database is available.
If you cannot use
FLASHBACK DATABASE because the flashback database window is not long enough, then you can use database point-in-time recovery (DBPITR) in most cases to achieve a similar result. Guaranteed restore points are the only way to ensure that you can use Flashback Database to return to a specific point in time or guarantee the size of the flashback window.
Flashback Database can only undo changes to a datafile made by Oracle Database. It cannot be used to repair media failures, or to recover from accidental deletion of datafiles.
You cannot use Flashback Database to undo a shrink datafile operation. However, you can take the shrunken file offline, flash back the rest of the database, and then later restore and recover the shrunken datafile.
You cannot use Flashback Database alone to retrieve a dropped datafile. If you flash back a database to a time when a dropped datafile existed in the database, only the datafile entry is added to the control file. You can only recover the dropped datafile by using RMAN to fully restore and recover the datafile.
If the database control file is restored from backup or re-created, all accumulated flashback log information is discarded. You cannot use
FLASHBACK DATABASE to return to a point in time before the restore or re-creation of a control file.
When using Flashback Database with a target time at which a
NOLOGGING operation was in progress, block corruption is likely in the database objects and datafiles affected by the
NOLOGGING operation. For example, if you perform a direct-path
INSERT operation in
NOLOGGING mode, and that operation runs from 9:00 to 9:15 on April 3, 2005, and you later use Flashback Database to return to the target time 09:07 on that date, the objects and datafiles updated by the direct-path
INSERT may be left with block corruption after the Flashback Database operation completes.
If possible, avoid using Flashback Database with a target time or SCN that coincides with a
NOLOGGING operation. Also, perform a full or incremental backup of the affected datafiles immediately after any
NOLOGGING operation to ensure recoverability to points in time after the operation. If you expect to use Flashback Database to return to a point in time during an operation such as a direct-path
INSERT, consider performing the operation in
LOGGING_CLAUSEin Oracle Database SQL Reference for more information about operations that support
Creating a normal restore point assigns a restore point name to an SCN or specific point in time. Thus, a restore point functions as a bookmark or alias for this SCN. Before performing any operation that you may have to reverse, you can create a normal restore point. The control file stores the name of the restore point and the SCN.
If you use flashback features or point-in-time recovery, then you can use the name of the restore point instead of a time or SCN. The following commands support this use of restore points:
Creating a normal restore point eliminates manually recording an SCN in advance or determine the correct SCN after the fact by using features such as Flashback Query.
Normal restore points are lightweight. The control file can maintain a record of thousands of normal restore points with no significant effect on database performance. Normal restore points eventually age out of the control file if not manually deleted, so they require no ongoing maintenance.
See Also:Oracle Database Advanced Application Developer's Guide to learn how to use Flashback Query
Like a normal restore point, a guaranteed restore point serves as an alias for an SCN in recovery operations. A principal difference is that guaranteed restore points never age out of the control file and must be explicitly dropped. In general, you can use a guaranteed restore point as an alias for an SCN with any command that works with a normal restore point. Except as noted, the information about where and how to use normal restore points applies to guaranteed restore points as well.
A guaranteed restore point ensures that you can use Flashback Database to rewind a database to its state at the restore point SCN, even if the generation of flashback logs is disabled. If flashback logging is enabled, then a guaranteed restore point enforces the retention of flashback logs required for Flashback Database to any SCN after the earliest guaranteed restore point. Thus, if flashback logging is enabled, you can rewind the database to any SCN in the continuum rather than to a single SCN only.
Caution:If flashback logging is disabled, then you cannot
DATABASEdirectly to SCNs between the guaranteed restore points and the current time. You can, however, flashback to the guaranteed restore point first and then recover to SCN's between the guaranteed restore point and current time.
If the recovery area has enough disk space to store the needed logs, then you can use a guaranteed restore point to rewind a whole database to a known good state days or weeks ago. As with Flashback Database, even the effects of
NOLOGGING operations like direct load inserts can be reversed with guaranteed restore points.
Note:Limitations that apply to Flashback Database also apply to guaranteed restore points. For example, shrinking a datafile or dropping a tablespace can prevent flashing back the affected datafiles to the guaranteed restore point. See "Limitations of Flashback Database" for details. In addition, when there are guaranteed restore points in the database, the database compatibility parameter cannot be set to a higher database version. An attempt to do so results in an error. This restriction exists because flashback database is currently unable to reverse the effects of increasing the database version with the compatibility initialization parameter.
In practice, guaranteed restore points provide a useful alternative to storage snapshots. Storage snapshots are often used to protect a database before risky operations such as large-scale database updates or application patches or upgrades. Rather than creating a snapshot or duplicate database to test the operation, you can create a guaranteed restore point on a primary or physical standby database. You can then perform the risky operation with the certainty that the required flashback logs are retained.
Logging for Flashback Database and guaranteed restore points involves capturing images of datafile blocks before changes are applied. The
DATABASE command can use these images to return the datafiles to their previous state.
The chief differences between normal flashback logging and logging for guaranteed restore points are related to when blocks are logged and whether the logs can be deleted in response to space pressure in the fast recovery area. These differences affect space usage for logs and database performance.
Your recoverability goals partially determine whether to enable logging for flashback database, or use guaranteed restore points, or both. The implications in performance and in space usage for these features, separately and when used together, should also factor into your decision.
If the fast recovery area has enough space, then a flashback log is created whenever necessary to satisfy the flashback retention target.
If a flashback log is old enough that it is no longer needed to satisfy the flashback retention target, then a flashback log is reused.
If the database must create a new flashback log and the fast recovery area is full or there is no disk space, then the oldest flashback log is reused instead.
Note:Reusing the oldest flashback log shortens the flashback database window. If enough flashback logs are reused due to a lack of disk space, then the flashback retention target may not be satisfied.
If the fast recovery area is full, then an archived redo log that is reclaimable according to the fast recovery area rules may be automatically deleted by the fast recovery area to make space for other files. In this case, any flashback logs that would require the use of that redo log file for the use of
DATABASE are also deleted.
Note:According to fast recovery area rules, a file is reclaimable when one of the following criteria is true:
The file is reported as obsolete and not needed by the flashback database. For example, the file is outside the
DB_FLASHBACK_RETENTION_TARGET parameters. The file is backed up to tape.
No file in the fast recovery area is eligible for deletion if it is required to satisfy a guaranteed restore point. Thus, retention of flashback logs and other files required to satisfy the guaranteed restore point, in addition to files required to satisfy the backup retention policy, can cause the fast recovery area to fill completely. Consult "Responding to a Full Fast Recovery Area" if your fast recovery area becomes full.
When you create a guaranteed restore point, with or without enabling full flashback database logging, you must monitor the space available in your fast recovery area. "Managing Space for Flashback Logs in the Fast Recovery Area" explains how to monitor fast recovery area disk space usage.
Caution:If no files are eligible for deletion from the fast recovery area because of the requirements imposed by your retention policy and the guaranteed restore point, then the database performs as if it has encountered a disk full condition. In many circumstances, this causes your database to halt. See "Responding to a Full Fast Recovery Area".
Assume that you create a guaranteed restore point when logging for Flashback Database is disabled. In this case, the first time a datafile block is modified after the time of the guaranteed restore point, the database stores an image of the block before the modification in the flashback logs. Thus, the flashback logs preserve the contents of every changed data block at the time that the guaranteed restore point was created. Later modifications to the same block do not cause the contents to be logged again unless another guaranteed restore point was created after the block was last modified.
This method of logging has the following important consequences:
DATABASE can re-create the datafile contents at the time of a guaranteed restore point by means of the block images.
For workloads that repeatedly modify the same data, disk space usage can be less than normal flashback logging. Less space is needed because each changed block is only logged once. Applications with low volume inserts may benefit from this disk space saving. This advantage is less likely for applications with high volume inserts or large batch inserts. The performance overhead of logging for a guaranteed restore point without flashback database logging enabled can also be lower.
Assume that your primary goal is the ability to return your database to the time at which the guaranteed restore point was created. In this case, it is usually more efficient to turn off flashback logging and use only guaranteed restore points. For example, suppose that you are performing an application upgrade on a database host over a weekend. You could create a guaranteed restore point at the start of the upgrade. If the upgrade fails, then reverse the changes with the
If you enable Flashback Database and define one or more guaranteed restore points, then the database performs normal flashback logging. In this case, the recovery area retains the flashback logs required to flash back to any arbitrary time between the present and the earliest currently defined guaranteed restore point. Flashback logs are not deleted in response to space pressure if they are required to satisfy the guarantee.
Flashback logging causes some performance overhead. Depending upon the pattern of activity on your database, it can also cause significant space pressure in the fast recovery area. Thus, you should monitor space used in the fast recovery area.
To ensure successful operation of Flashback Database and guaranteed restore points, you must first set a number of key database options.
Configure the following database settings before enabling Flashback Database:
You must have a fast recovery area enabled, because flashback logs can only be stored in the fast recovery area.
For Oracle Real Application Clusters (Oracle RAC) databases, the fast recovery area must be in a clustered file system or in ASM.
Guaranteed Restore Points
To use guaranteed restore points, the database must satisfy the following additional prerequisite: the
COMPATIBLE initialization parameter must be set to 10.2.0 or greater
Note:There are no special prerequisites to set before using normal restore points.
This section describes the various commands and monitoring capabilities you use with normal and guaranteed restore points.
To create normal or guaranteed restore points, use the
CREATE RESTORE POINT SQL statement, providing a name for the restore point and specifying whether it is to be a guaranteed restore point or a normal one (the default).
To create a restore point:
Connect SQL*Plus to a target database.
See Also:Oracle Database Administrator's Guide for using SQL*Plus to connect to a database
Ensure that the database is open or mounted. If the database is mounted, then it must have been shut down cleanly (unless it is a physical standby database).
CREATE RESTORE POINT statement.
The following example shows how to create a normal restore point in SQL*Plus:
SQL> CREATE RESTORE POINT before_upgrade;
This example shows how to create a guaranteed restore point:
SQL> CREATE RESTORE POINT before_upgrade GUARANTEE FLASHBACK DATABASE;
LIST RESTORE POINT restore_point_name; LIST RESTORE POINT ALL;
RMAN indicates the SCN and time of the restore point, the type of restore point, and the name of the restore point. The following example shows sample output:
RMAN> LIST RESTORE POINT ALL; using target database control file instead of recovery catalog SCN RSP Time Type Time Name ---------------- --------- ---------- --------- ---- 341859 28-JUL-06 28-JUL-06 NORMAL_RS 343690 28-JUL-06 GUARANTEED 28-JUL-06 GUARANTEED_RS
To see a list of all currently defined restore points (normal and guaranteed), use the
V$RESTORE_POINT control file view, by means of the following query:
SQL> SELECT NAME, SCN, TIME, DATABASE_INCARNATION#, GUARANTEE_FLASHBACK_DATABASE,STORAGE_SIZE FROM V$RESTORE_POINT;
The output from the view:
Name of each restore point (guaranteed and normal)
Time and database incarnation number when the restore points were created
Type of restore point (normal or guaranteed)
Amount of space in the fast recovery area being used to support information needed for Flashback Database operations for that restore point
For normal restore points,
STORAGE_SIZE is zero. For guaranteed restore points,
STORAGE_SIZE indicates the amount of disk space in the fast recovery area used to retain logs required to guarantee
DATABASE to that restore point.
When you are satisfied that you do not need an existing restore point, or when you want to create a new restore point with the name of an existing restore point, you can drop the restore point, using the
DROP RESTORE POINT SQL*Plus statement. For example:
SQL> DROP RESTORE POINT before_app_upgrade; Restore point dropped.
The same statement is used to drop both normal and guaranteed restore points.
Note:Normal restore points eventually age out of the control file, even if not explicitly dropped. The rules governing retention of restore points in the control file are:
The most recent 2048 restore points are always kept in the control file, regardless of their age.
Any restore point more recent than the value of
CONTROL_FILE_RECORD_KEEP_TIME is retained, regardless of how many restore points are defined.
Normal restore points that do not meet either of these conditions may age out of the control file.
Guaranteed restore points never age out of the control file. They remain until they are explicitly dropped.
See also:Oracle Database SQL Language Reference for reference information about the SQL
DROP RESTORE POINTstatement
This section describes the basic commands for Flashback Database. It also lists guidelines to ensure optimal performance of Flashback Database.
Follow these are the steps to enable Flashback Database.
To enable flashback logging:
Ensure the database instance is open or mounted. If the instance is mounted, then the database must be shut down cleanly unless it is a physical standby database. Other Oracle RAC instances can be in any mode.
Optionally, set the
DB_FLASHBACK_RETENTION_TARGET to the length of the desired flashback window in minutes:
ALTER SYSTEM SET DB_FLASHBACK_RETENTION_TARGET=4320; # 3 days
DB_FLASHBACK_RETENTION_TARGET is set to 1 day (1440 minutes).
Enable the Flashback Database feature for the whole database:
ALTER DATABASE FLASHBACK ON;
Optionally, disable flashback logging for specific tablespaces.
By default, flashback logs are generated for all permanent tablespaces. You can reduce overhead by disabling flashback logging for specific tablespaces as in the following example:
ALTER TABLESPACE tbs_3 FLASHBACK OFF;
You can reenable flashback logging for a tablespace later with this command:
ALTER TABLESPACE tbs_3 FLASHBACK ON;
If you disable Flashback Database for a tablespace, then you must take its datafiles offline before running
When you enable Flashback Database while the database is open, there is a very small chance the command may not be able to obtain the memory it needs. If the command fails because of that reason, retry the command after a while or retry after a shutdown and restart of the instance.
When you enable Flashback Database on a physical standby database, you can flash back a standby database. Flashback Database of standby databases has a number of applications in the Data Guard environment. See Oracle Data Guard Concepts and Administration for details.
On one of the database instances that is either in mount or open state, issue the following command:
ALTER DATABASE FLASHBACK OFF;
Maintaining flashback logs imposes comparatively limited overhead on an database instance. Changed blocks are written from memory to the flashback logs at relatively infrequent, regular intervals, to limit processing and I/O overhead.
To achieve good performance for large production databases with Flashback Database enabled, Oracle recommends the following:
Use a fast file system for your fast recovery area, preferably without operating system file caching.
Files that the database creates in the fast recovery area, including flashback logs, are typically large. Operating system file caching is typically not effective for these files, and may actually add CPU overhead for reading from and writing to these files. Thus, it is recommended to use a file system that avoids operating system file caching, such as ASM.
Configure enough disk spindles for the file system that holds the fast recovery area.
For large production databases, multiple disk spindles may be needed to support the required disk throughput for the database to write the flashback logs effectively.
If the storage system used to hold the fast recovery area does not have nonvolatile RAM, then try to configure the file system on striped storage volumes.
Use a relatively small stripe size such as 128 KB. This technique enables each write to the flashback logs to be spread across multiple spindles, improving performance.
For large databases, set the initialization parameter
LOG_BUFFER to at least 8 MB.
The overhead of logging for Flashback Database depends on the mixture of reads and writes in the database workload. When you have a write-intensive workload, the Flashback Database logging overhead is high since it must log all those database changes. Queries do not change data and thus do not contribute to logging activity for Flashback Database.
The Automatic Workload Repository (AWR) automates database statistics gathering by collecting, processing, and maintaining performance statistics for database problem detection and self-tuning. There are several data analysis methods for monitoring the Flashback Database workload on your system. For example, you can compare AWR reports from before and after the Flashback Database was turned on. You can also review AWR snapshots to pinpoint system usage caused by flashback logging. For example, if
flashback buf free by RVWR is the top wait event, then you know that Oracle Database cannot write flashback logs very quickly. Therefore, you might want to tune the file system and storage used by the fast recovery area, possibly using one of the techniques described in "Configuring the Environment for Optimal Flashback Database Performance".
V$FLASHBACK_DATABASE_STAT view shows the bytes of flashback data logged by the database. Each row in the view shows the statistics accumulated (typically over the course of an hour). The
REDO_DATA columns describe bytes of flashback data and redo data written respectively during the time interval, while the
DB_DATA column describes bytes of data blocks read and written. The columns
REDO_DATA correspond to sequential writes, whereas
DB_DATA column corresponds to random reads and writes.
Because of the difference between sequential I/O and random I/O, a better indication of I/O overhead is the number of I/O operations issued for flashback logs. The
V$SYSSTAT statistics shown in Table 7-1 can tell you the number of I/O operations that your instance has issued for various purposes.
Table 7-1 V$SYSSTAT Statistics
|Column Name||Column Meaning|
Physical write I/O request
The number of write operations issued for writing data blocks
Physical read I/O request
The number of read operations issued for reading data blocks
The number of write operations issued for writing to the redo log
Flashback log writes
The number of write operations issued for writing to flashback logs
Flashback log write bytes
Total size in bytes of flashback database data written from this instance
When flashback is enabled or when there are guaranteed restore points, the background process RVWR writes flashback data to flashback database logs in the fast recovery area. If RVWR encounters an I/O error, then the following behavior is expected:
If there are any guaranteed restore points defined, then the instance fails when RVWR encounters I/O errors.
If no guaranteed restore points are defined, then the instance remains unaffected when RVWR encounters I/O errors. Note the following cases:
On a primary database, Oracle Database automatically disables Flashback Database while the database is open. All existing transactions and queries proceed unaffected. This behavior is expected for both single-instance and Oracle RAC databases.
On a physical or logical standby, RVWR appears to have stopped responding, retrying the I/O periodically. This may eventually cause the logical standby or the managed recovery of the physical standby to suspend. (Oracle Database does not cause the standby instance to fail because it does not want to cause the primary database to fail in maximum protection mode.) To resolve the issue, you can issue either a
ABORT or an