JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle Solaris 11.1 Administration: SAN Configuration and Multipathing     Oracle Solaris 11.1 Information Library
search filter icon
search icon

Document Information

Preface

1.  Solaris I/0 Multipathing Overview

2.  Fibre Channel Multipathing Configuration Overview

3.  Configuring Solaris I/O Multipathing Features

4.  Administering Multipathing Devices

5.  Configuring Fabric-Connected Devices

6.  Configuring Solaris iSCSI Initiators

7.  Configuring Virtual Fibre Channel Ports

8.  Configuring FCoE Ports

9.  Configuring SAS Domains

10.  Configuring IPFC SAN Devices

11.  Booting the Oracle Solaris OS From Fibre Channel Devices on x86 Based Systems

12.  Persistent Binding for Tape Devices

A.  Manual Configuration for Fabric-Connected Devices

Manually Configuring FC Devices

How to Manually Configure a FC Device

Configuring Fabric Device Nodes

Ensuring That LUN Level Information Is Visible

How to Ensure LUN Level Information is Visible

How to Detect Visible Fabric Devices on a System

Configuring Device Nodes Without Multipathing Enabled

How to Manually Configure an FC Device Without Multipathing

How to Configure Multiple FC Devices Without Multipathing

Configuring Device Nodes With Solaris Multipathing Enabled

How to Configure Individual Multipathed FC Devices

How to Configure Multiple Multipathed FC Devices

Unconfiguring Fabric Devices

Unconfiguring a Fabric Device

How to Manually Unconfigure a FC Device

How to Unconfigure All FC Devices on a FC Host Port

How to Unconfigure a Multipathed FC Device

How to Unconfigure One Path to a Multipathed FC Device

How to Unconfigure All Multipathed FC Devices

B.  Supported FC-HBA API

C.  Troubleshooting Multipathed Device Problems

Index

Manually Configuring FC Devices

In the Oracle Solaris release, fabric-connected devices are available automatically to the Oracle Solaris system.

If you want to manually configure the fabric-connected devices, use the following steps to change the default behavior.


Note - Changing the default behavior makes all of your fabric-connected devices unavailable, which can cause problems for fabric-connected devices that are required to be available at boot time.