| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris 11.1 Administration: SAN Configuration and Multipathing Oracle Solaris 11.1 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris 11.1 Administration: SAN Configuration and Multipathing Oracle Solaris 11.1 Information Library |
1. Solaris I/0 Multipathing Overview
2. Fibre Channel Multipathing Configuration Overview
3. Configuring Solaris I/O Multipathing Features
4. Administering Multipathing Devices
5. Configuring Fabric-Connected Devices
Oracle Solaris iSCSI Technology (Overview)
Identifying Oracle Solaris iSCSI Software and Hardware Requirements
Configuring iSCSI Initiators Tasks
Recommended iSCSI Configuration Practices
Configuring Dynamic or Static Target Discovery
How to Configure an iSCSI Initiator
How to Remove Discovered Target Devices
Configuring Authentication in Your iSCSI-Based Storage Network
How to Configure CHAP Authentication for Your iSCSI Initiator
How to Configure CHAP Authentication for Your iSCSI Target
Using a Third-Party RADIUS Server to Simplify CHAP Management in Your iSCSI Configuration
How to Configure a RADIUS Server for Your iSCSI Target
How to Configure a RADIUS Server for Your iSCSI Initiator
Oracle Solaris iSCSI and RADIUS Server Error Messages
Setting Up iSCSI Multipathed Devices in Oracle Solaris
How to Enable Multiple iSCSI Sessions for a Target
Monitoring Your iSCSI Configuration
How to Display iSCSI Configuration Information
Modifying iSCSI Initiator and Target Parameters
How to Modify iSCSI Initiator and Target Parameters
Troubleshooting iSCSI Configuration Problems
No Connections to the iSCSI Target From the Local System
How to Troubleshoot iSCSI Connection Problems
iSCSI Device or Disk Is Not Available on the Local System
How to Troubleshoot iSCSI Device or Disk Unavailability
Use LUN Masking When Using the iSNS Discovery Method
7. Configuring Virtual Fibre Channel Ports
10. Configuring IPFC SAN Devices
11. Booting the Oracle Solaris OS From Fibre Channel Devices on x86 Based Systems
12. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
This chapter describes how to configure Solaris iSCSI initiators in the Oracle Solaris release. For information about the procedures associated with configuring iSCSI initiators, see Configuring iSCSI Initiators Tasks.
The following topics are covered:
For information about configuring Oracle Solaris iSCSI targets with COMSTAR, see Chapter 11, Configuring Storage Devices With COMSTAR (Tasks), in Oracle Solaris 11.1 Administration: Devices and File Systems.
For more information about installing and booting an iSCSI disk, see Step 7 in How to Perform a GUI Installation in Installing Oracle Solaris 11.1 Systems.
|