| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris SAN Configuration and Multipathing Guide Oracle Solaris 10 1/13 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris SAN Configuration and Multipathing Guide Oracle Solaris 10 1/13 Information Library |
1. Solaris I/0 Multipathing Overview
2. Configuring Solaris I/O Multipathing Features
3. Configuring Fabric-Connected Devices
4. Configuring Oracle Solaris iSCSI Initiators
6. Configuring IPFC SAN Devices
7. Booting the Oracle Solaris OS From Fibre Channel Devices on x86 Based Systems
8. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
Manually Configuring FC Devices
How to Manually Configure a FC Device
Configuring Fabric Device Nodes
Ensuring That LUN Level Information Is Visible
How to Ensure LUN Level Information is Visible
How to Detect Visible Fabric Devices on a System
Configuring Device Nodes Without Multipathing Enabled
How to Manually Configure an FC Device Without Multipathing
How to Configure Multiple FC Devices Without Multipathing
Configuring Device Nodes With Solaris Multipathing Enabled
How to Configure Individual Multipathed FC Devices
How to Configure Multiple Multipathed FC Devices
How to Manually Unconfigure a FC Device
How to Unconfigure All FC Devices on a FC Host Port
How to Unconfigure a Multipathed FC Device
How to Unconfigure One Path to a Multipathed FC Device
How to Unconfigure All Multipathed FC Devices
This section provides information about unconfiguring the multipathing features for fabric devices.
Before you unconfigure a fabric device, stop all activity to the device and unmount any file systems on the fabric device. See the Oracle Solaris administration documentation for unmounting instructions. If the device is under any volume manager’s control, see your volume manager documentation before unconfiguring the device.
|