| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris SAN Configuration and Multipathing Guide Oracle Solaris 10 1/13 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris SAN Configuration and Multipathing Guide Oracle Solaris 10 1/13 Information Library |
1. Solaris I/0 Multipathing Overview
2. Configuring Solaris I/O Multipathing Features
3. Configuring Fabric-Connected Devices
4. Configuring Oracle Solaris iSCSI Initiators
SAS Multipathing Considerations
6. Configuring IPFC SAN Devices
7. Booting the Oracle Solaris OS From Fibre Channel Devices on x86 Based Systems
8. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
Adding and removing SAS devices is performed dynamically when using the mpt driver. You are no longer required to edit the sd.conf file to enable your system to detect specific targets and LUNs attached with the mpt driver. For more information see mpt(7D) and mpt_sas(7D).
If you add or remove a device in your SAS domain, messages are written to the /var/adm/messages file indicating its presence or removal. If a device has been added, it is visible to and available through the format command.
|