Load BIOS Optimal Default Settings

The BIOS Setup Utility contains an option to load the optimal BIOS settings for the server, as it was shipped from the factory. Perform this procedure on a newly installed server to ensure that the BIOS is set to the optimal default values.

Before You Begin

• The server is equipped with a properly installed storage drive.

• A console connection is established to the server.

1. Power on the server.

   POST messages appear on the console.

2. Watch the messages, and, when prompted, press F2 to access the BIOS Setup Utility.

   The BIOS Setup Utility main screen appears.

3. To ensure that the factory defaults are set, press F9.
4. To save the changes, and exit the BIOS Setup Utility, press F10.
5. Reboot the server.

Next Steps

Select the BIOS Boot Mode