CLI Command Modes

The following table lists the configuration modes used in this document with their access and exit methods.

Command Mode	Access Method	Prompt	Exit Method
User EXEC	Access SEFOS from Oracle ILOM with read-only rights (privilege level 1).	`SEFOS>`	Use the `logout` or `exit` command to return to the Oracle ILOM prompt.
Privileged EXEC	Access SEFOS from Oracle ILOM with full administrative rights (privilege level 15).	`SEFOS#`	Use the `logout` or `exit` command to return to the Oracle ILOM prompt.
Global Configuration	From User EXEC mode, use the `enable` command.	`SEFOS(config)#`	Use the `end` command to return to Privileged EXEC mode.
Interface Configuration	From Global Configuration mode, use the `interface` `interface-type interface-id` command.	`SEFOS(config-if)#`	Use the `exit` command to return to Global Configuration mode, or use the `end` command to return to Privileged EXEC mode.
XVLAN Configuration	From Global Configuration mode, use the `xvlan XVLANid` command.	`SEFOS(config-xvlan)#`	Use the `exit` command to return to Global Configuration mode, or use the `end` command to return to Privileged EXEC mode.

Skip Navigation Links
Exit Print View
	Sun Ethernet Fabric Operating System XVLAN Administration Guide