Attach Tool-less Slide-Rail Assemblies
Use this procedure to attach
tool-less slide-rail assemblies to the rack.
-
Orient the slide-rail assembly so that the ball-bearing track is forward and locked in
place.
|
|
1
|
Slide-rail
|
2
|
Ball-bearing track
|
3
|
Locking mechanism
|
|
-
Starting with either the left or right side of the rack, align the rear of the slide-rail
assembly against the inside of the rear rack rail, and push until the assembly locks into place with
an audible click.
-
Align the front of the slide-rail assembly against the outside of the front rack rail, and
push until the assembly locks into place with an audible click.
-
Repeat
Step 1 through
Step 3 to attach the slide-rail
assembly to the other side of the rack.