Managing SAN Devices and Multipathing in Oracle^® Solaris 11.3

How to Manually Unconfigure a FC Device

This procedure describes how to unconfigure a fabric device that is attached to the fabric-connected host port c0.

1. Become an administrator.

   For more information, see Using Your Assigned Administrative Rights in Securing Users and Processes in Oracle Solaris 11.3.

2. Identify the fabric device to be unconfigured.

   Only devices on a fabric-connected host port can be unconfigured.

   # cfgadm -al
   Ap_Id                 Type         Receptacle   Occupant    Condition
   c0                   fc-fabric  connected    configured   unknown
   c0::50020f2300006077 disk       connected    configured   unknown
   c0::50020f23000063a9 disk       connected    configured   unknown
   c1                   fc-private connected    configured   unknown
   c1::220203708b69c32b disk       connected    configured   unknown
   c1::220203708ba7d832 disk       connected    configured   unknown

3. Unconfigure the fabric device.

   # cfgadm -c unconfigure c0::50020f2300006077

4. Verify that the selected fabric device is unconfigured.

   # cfgadm -al
   Ap_Id                Type         Receptacle   Occupant     Condition
   c0                 fc-fabric    connected    configured   unknown
   c0::50020f2300006077 disk       connected    unconfigured unknown
   c0::50020f23000063a9 disk       connected    configured   unknown
   c1                 fc-private   connected    configured   unknown
   c1::220203708b69c32b disk       connected    configured   unknown
   c1::220203708ba7d832 disk       connected    configured   unknown