Go to main content
Index
B
- broadcast (SLP)
When to Configure for Nonrouted,
Multiple Network Interfaces- Why Deploy an SLP DA?
- Configuring Broadcast-Only Routing
D
- DA discovery (SLP)Time-out Properties
- DA heartbeat
- frequencyModifying DA Advertising and Discovery
Frequency
- DA_BUSY_NOWPlacing Multiple DAs for Load Balancing
- DAs (SLP)
- advertising
- How to Configure DA Heartbeat for Frequent
Partitions
- Configuring the DA Heartbeat for Frequent
Partitions
- Configuring DA Discovery for Dial-up
Networks
- Modifying DA Advertising and Discovery
Frequency
- DA loggingWhy Deploy an SLP DA?
- deploying
- Why Deploy an SLP DA?
- Relieving Network Congestion
- dial-up networks discovery
- How to Configure DA Heartbeat for Frequent
Partitions
- Configuring DA Discovery for Dial-up
Networks
- disable active discoveryHow to Limit UAs and SAs to Statically
Configured DAs
- disable passive discoveryHow to Limit UAs and SAs to Statically
Configured DAs
- discovery
- Considerations When Configuring Scopes
- Relieving Network Congestion
- Modifying DA Advertising and Discovery
Frequency
- eliminating multicastHow to Limit UAs and SAs to Statically
Configured DAs
- heartbeat
- How to Reduce SA Reregistrations
- How to Configure DA Heartbeat for Frequent
Partitions
- How to Configure DA Heartbeat for Frequent
Partitions
- Configuring the DA Heartbeat for Frequent
Partitions
- multicastRelieving Network Congestion
- multiple DAsPlacing Multiple DAs for Load Balancing
- removingConfiguring the DA Heartbeat for Frequent
Partitions
- without multicastWhen to Configure for Nonrouted,
Multiple Network Interfaces
- directory agent (SLP)
- DA addressesLimiting UAs and SAs to Statically
Configured DAs
- load balancingPlacing Multiple DAs for Load Balancing
- network congestion andRelieving Network Congestion
- SLP architecture andSLP Architecture
- when to deployWhen to Deploy DAs
- where to placeWhere to Place DAs
- discovery requests (SLP)Modifying Timeouts on SLP Discovery
Requests
E
- /etc/inet/slp.conf file
- broadcast-only routingHow to Configure Broadcast-Only Routing
- changing configurationHow to Change Your SLP Configuration
- changing interfacesHow to Configure the net.slp.interfaces Property
- DA advertisementsHow to Configure DA Discovery for Dial-up
Networks
- DA heartbeatHow to Configure DA Heartbeat for Frequent
Partitions
- deploy DAsHow to Deploy DAs
- elementsSLP Configuration File: Basic Elements
- load balancingPlacing Multiple DAs for Load Balancing
- multicast time-to-liveHow to Configure the Multicast
Time-to-Live Property
- new scopes
- How to Configure Scopes
- Deploying Scopes
- overviewSLP Configuration Considerations
- packet sizeHow to Configure the Packet Size
- proxy registrationHow to Enable SLP Proxy Registration
- random-wait boundHow to Configure the Random-Wait Bound
- SA reregistrationsHow to Reduce SA Reregistrations
- timeoutsHow to Change Default Timeouts
- with static DAsHow to Limit UAs and SAs to Statically
Configured DAs
- /etc/init.d/slpd scriptHow to Enable SLP Proxy Registration
L
- legacy services (SLP)
- advertising
- Considerations When Advertising Legacy
Services
- Advertising Legacy Services
- When to Advertise Legacy Services
- definitionWhen to Advertise Legacy Services
- libslp.so librarySLP Implementation
M
- message types
- SLPSLP Message Types
- multicast (SLP)
- changing interfacesConfiguring the net.slp.interfaces Property
- DAs
- How to Configure DA Heartbeat for Frequent
Partitions
- How to Limit UAs and SAs to Statically
Configured DAs
- if disabledWhen to Configure for Nonrouted,
Multiple Network Interfaces
- multihomed machines andMultihoming Configuration for SLP
- propagationHow to Configure the Multicast
Time-to-Live Property
- service requestsWhy Deploy an SLP DA?
- time–to-live propertyConfiguring the Multicast Time-to-Live
Property
- trafficWhy Deploy an SLP DA?
- multihomed hosts (SLP)
- broadcast-only routingConfiguring Broadcast-Only Routing
- changing interfacesConfiguring the net.slp.interfaces Property
- configurationMultihoming Configuration for SLP
- proxy advertisementProxy Advertising on Multihomed Hosts
- scopes andDA Placement and Scope Name Assignment
- unicast routing disabledConfiguring the net.slp.interfaces Property
- without multicastWhy Deploy an SLP DA?
N
- net.slp.DAActiveDiscoveryInterval propertyHow to Limit UAs and SAs to Statically
Configured DAs
- definitionDA Advertisement Timing and Discovery Request Properties
- net.slp.DAAddresses property
- Placing Multiple DAs for Load Balancing
- Considerations When Configuring Scopes
- How to Configure DA Heartbeat for Frequent
Partitions
- definitionLimiting UAs and SAs to Statically
Configured DAs
- net.slp.DAAttributes propertyReducing SA Reregistrations
- net.slp.DAHeartBeat property
- How to Reduce SA Reregistrations
- How to Configure DA Heartbeat for Frequent
Partitions
- definitionDA Advertisement Timing and Discovery Request Properties
- net.slp.interfaces property
- changing interfacesHow to Configure the net.slp.interfaces Property
- configuringConfiguring the net.slp.interfaces Property
- DAs andWhere to Place DAs
- multihomed hosts andDA Placement and Scope Name Assignment
- nonrouted interfaces andConsiderations When Configuring for
Nonrouted, Multiple Network Interfaces
- net.slp.isBroadcastOnly property
- Configuring the net.slp.interfaces Property
- When to Configure for Nonrouted,
Multiple Network Interfaces
- How to Configure Broadcast-Only Routing
- Configuring Broadcast-Only Routing
- net.slp.isDA propertySetting up slpd to Operate as a DA Server
- net.slp.MTU propertyConfiguring the Packet Size
- net.slp.multicastTTL propertyConfiguring the Multicast Time-to-Live
Property
- net.slp.passiveDADetection propertyHow to Limit UAs and SAs to Statically
Configured DAs
- definitionDA Advertisement Timing and Discovery Request Properties
- net.slp.randomWaitBound propertyConfiguring the Random-Wait Bound
- net.slp.serializedRegURL propertyHow to Enable SLP Proxy Registration
- net.slp.useScopes property
- SLP Proxy Registration File Description
- Considerations When Configuring Scopes
- Considerations When Configuring Scopes
- definitionDeploying Scopes
- netstat commandUsing snoop to
Monitor SLP Activity
- network interfaces (SLP)
- nonrouted considerationsConsiderations When Configuring for
Nonrouted, Multiple Network Interfaces
P
- packet size
- configuring for SLPConfiguring the Packet Size
- ping commandChanging Default Timeouts
- proxy advertisement (SLP)
- Using SLP Proxy Registration to Advertise
- Advertising Legacy Services
- proxy registration (SLP)
- Using SLP Proxy Registration to Advertise
- SLP Proxy Registration
- multihomed hostsProxy Advertising on Multihomed Hosts
R
- registration lifetime (SLP)How to Use snoop to
Run SLP Traces
S
- SA server (SLP)Configuring the Random-Wait Bound
- SAs (SLP)
- Advertising a Service That Is Not SLP
Enabled
- Configuring the net.slp.interfaces Property
- Considerations When Configuring Scopes
- scopes (SLP)
- considerationsConsiderations When Configuring Scopes
- DAs and
- Why Deploy an SLP DA?
- Configuring the DA Heartbeat for Frequent
Partitions
- default scopeConsiderations When Configuring Scopes
- definitionSLP Architecture
- deployingDeploying Scopes
- multihomed hosts andDA Placement and Scope Name Assignment
- proxy registration andSLP Proxy Registration
- when to configureWhen to Configure Scopes
- service advertisement (SLP)
- Using SLP Proxy Registration to Advertise
- Reducing SA Reregistrations
- service agent (SLP)
- Reducing SA Reregistrations
- Limiting UAs and SAs to Statically
Configured DAs
- service discovery (SLP)
- Why Deploy an SLP DA?
- Time-out Properties
- Configuring Broadcast-Only Routing
- service requests (SLP)Why Deploy an SLP DA?
- service URLs
- proxy registration (SLP)
- Using SLP Proxy Registration to Advertise
- SLP Proxy Registration
- SLP
- advertisingWhy Deploy an SLP DA?
- agents and processesSLP Agents and Processes
- analyzing snoop slp traceAnalyzing a snoop slp Trace
- architectureSLP Architecture
- broadcast routingConfiguring Broadcast-Only Routing
- configuration file
- SLP Configuration File: Basic Elements
- Configuring SLP Properties
- configuration propertiesConfiguration Properties
- configuringSLP Configuration Considerations
- daemonSLP Implementation
- discovery requestsModifying Timeouts on SLP Discovery
Requests
- implementationSLP Implementation
- loggingSLP Architecture
- packet sizeConfiguring the Packet Size
- performance tuningAccommodating Different Network Media,
Topologies, or Configurations
- planning deploymentSLP Configuration Considerations
- SLP message typesSLP Message Types
- SLP status codesSLP Status Codes
- slp.conf file
- commentsComment Lines and Notations
- slp.jar librarySLP Implementation
- slpd.conf file
- Considerations When Configuring Scopes
- Limiting UAs and SAs to Statically
Configured DAs
- slpd daemon
- Considerations When Advertising Legacy
Services
- SLP Proxy Registration
- Advertising Legacy Services
- changing interfacesConfiguring the net.slp.interfaces Property
- DAsConfiguring the Random-Wait Bound
- heartbeatConfiguring the DA Heartbeat for Frequent
Partitions
- multihomed machines andMultihoming Configuration for SLP
- proxy advertisement andProxy Advertising on Multihomed Hosts
- removing DAsConfiguring the DA Heartbeat for Frequent
Partitions
- SA serverConfiguring the Random-Wait Bound
- scopes andConsiderations When Configuring Scopes
- static DAs andLimiting UAs and SAs to Statically
Configured DAs
- SLPv2
- interoperability with SLPv1Why Deploy an SLP DA?
- snoop command
- monitoring retransmissionConfiguring the Random-Wait Bound
- multiple SLP requests andConfiguring the net.slp.interfaces Property
- SLP service registration andReducing SA Reregistrations
- SLP traffic andPlacing Multiple DAs for Load Balancing
- using with SLP
- Analyzing a snoop slp Trace
- How to Use snoop to
Run SLP Traces
- Using snoop to
Monitor SLP Activity
- status codes, SLPSLP Status Codes
T
- timeouts (SLP)
- Why Deploy an SLP DA?
- Changing Default Timeouts
- Modifying Timeouts on SLP Discovery
Requests
- tuning SLP performanceAccommodating Different Network Media,
Topologies, or Configurations
U
- UAs
- requestsReducing SA Reregistrations
- UAs (SLP)
- Why Deploy an SLP DA?
- Using snoop to
Monitor SLP Activity
- requests timeoutPlacing Multiple DAs for Load Balancing
- UDP/TCP unicast (SLP)Multihoming Configuration for SLP
- unicast routing (SLP)Multihoming Configuration for SLP
- disabledConfiguring the net.slp.interfaces Property
- user agent (SLP)Limiting UAs and SAs to Statically
Configured DAs