Boot the OS (Oracle ILOM)
By default, the host automatically attempts to
boot when the host is reset or powered on.
- Log
in to Oracle ILOM.
See Log In to Oracle ILOM.
- If the OpenBoot parameters are
configured with default values, boot the host using one of these
methods:
-
Oracle ILOM web interface – In Host
Management > Power Control, select any of the reset, power on, or
power cycle actions, and click Save.
-
Oracle ILOM CLI – Type:
-> reset /System
Note -
If the OpenBoot parameters are not configured with default values,
when you reset the host, the host might stop at the OpenBoot prompt. To
boot from the OpenBoot prompt, see
Boot the OS Manually (OpenBoot).