Go to main content

Oracle® VM Server for SPARC 3.5 Developer's Guide

Exit Print View

Updated: November 2017
 
 

XML List Examples

The examples in this section show how to use input XML to perform list commands.

Example 28  Example Blacklisted CPU XML

The example input XML for the ldm list-devices -B command for blacklisted cores is:

<cmd> 
    <action>list-devices</action> 
    <options>-B</options>
    <data version="3.0"> 
       <Envelope>
         <Section xsi:type="ovf:VirtualHardwareSection_Type">
           <Item>
             <rasd:OtherResourceType>core</rasd:OtherResourceType>
           </Item>
         </Section>
       </Envelope>
    </data> 
</cmd>

The following example XML example shows the output of the ldm list-devices -B command:

<cmd> 
  <action>list-devices</action> 
  <options>-B</options>
  <data version="3.0"> 
    <Envelope> 
      <References/> 
      <Section xsi:type="ovf:VirtualHardwareSection_Type"> 
        <Item>
          <rasd:OtherResourceType>core</rasd:OtherResourceType>
          <gprop:GenericProperty key="cid">1</gprop:GenericProperty> 
          <gprop:GenericProperty key="status">blacklisted</gprop:GenericProperty> 
        </Item>
...
      </Section>
    </Envelope> 
...
</cmd>
Example 29  Example Blacklisted Memory XML

The example input XML for the ldm list-devices -B command for blacklisted memory is:

<cmd> 
  <action>list-devices</action> 
  <options>-B</options>
  <data version="3.0"> 
    <Envelope>
      <Section xsi:type="ovf:VirtualHardwareSection_Type">
        <Item>
          <rasd:OtherResourceType>memory</rasd:OtherResourceType>
        </Item>
      </Section>
    </Envelope>
  </data> 
</cmd>

The following example XML example shows the output of the ldm list-devices -B command:

<cmd> 
  <action>list-devices</action> 
  <options>-B</options>
  <data version="3.0"> 
    <Envelope> 
      <References/> 
      <Section xsi:type="ovf:VirtualHardwareSection_Type"> 
        <Item>
          <rasd:OtherResourceType>memory</rasd:OtherResourceType>
          <gprop:GenericProperty key="pa">0xa30000000</gprop:GenericProperty> 
          <gprop:GenericProperty key="size">2G</gprop:GenericProperty> 
          <gprop:GenericProperty key="status">blacklisted</gprop:GenericProperty> 
        </Item>
        <Item>
          <rasd:OtherResourceType>memory</rasd:OtherResourceType>
          <gprop:GenericProperty key="pa">0xbb0000000</gprop:GenericProperty> 
          <gprop:GenericProperty key="size">2G</gprop:GenericProperty> 
          <gprop:GenericProperty key="status">evac_pending</gprop:GenericProperty> 
          <gprop:GenericProperty key="domain">ldg1</gprop:GenericProperty> 
        </Item>
      </Section>
    </Envelope> 
    <response> 
      <status>success</status> 
    </response> 
  </data> 
  <response> 
    <status>success</status> 
  </response> 
</cmd> 
<response> 
  <status>success</status> 
</response>
Example 30  Using the list-bindings -e Command With XML

The following XML example shows the ldm list-bindings -e command output:

<cmd>
  <action>list-bindings</action>
  <options>-e</options>
  <data version="3.0">
    <Envelope>
      <References/>
      <Content xsi:type="ovf:VirtualSystem_Type" ovf:id="primary">
        ...
        <Section xsi:type="ovf:VirtualHardwareSection_Type">
          <Item>
            <rasd:OtherResourceType>vldc</rasd:OtherResourceType>
            <gprop:GenericProperty key="service_name">primary-vldc3
              </gprop:GenericProperty>
            <gprop:GenericProperty key="client">SP</gprop:GenericProperty>
            <gprop:GenericProperty key="desc">spds</gprop:GenericProperty>
            <gprop:GenericProperty key="ldc">0x14</gprop:GenericProperty>
            <bind:Binding/>
          </Item>
        </Section>
        <Section xsi:type="ovf:VirtualHardwareSection_Type">
          <Item>
            <rasd:OtherResourceType>vldc</rasd:OtherResourceType>
            <gprop:GenericProperty key="client">SP</gprop:GenericProperty>
            <gprop:GenericProperty key="desc">sunvts</gprop:GenericProperty>
            <gprop:GenericProperty key="ldc">0x6</gprop:GenericProperty>
            <bind:Binding/>
          </Item>
        </Section>
...
        <Section xsi:type="ovf:VirtualHardwareSection_Type">
          <Item>
            <rasd:OtherResourceType>vldcc</rasd:OtherResourceType>
            <gprop:GenericProperty key="name">ds</gprop:GenericProperty>
            <gprop:GenericProperty key="service">primary-vldc0@primary
              </gprop:GenericProperty>
            <gprop:GenericProperty key="desc">domain-services</gprop:GenericProperty>
            <gprop:GenericProperty key="ldc">0x2</gprop:GenericProperty>
            <bind:Binding/>
          </Item>
        </Section>
...
</cmd>
Example 31  Using the list-netdev -b Command With XML

The following XML example can be used to run the ldm list-netdev -b primary command. This command lists information about all the network devices the primary domain:

<cmd>
  <action>list-netdev</action>
  <options>-b</options>
  <data version="3.0">
    <Envelope>
      <References/>
      <Content xsi:type="ovf:VirtualSystem_Type" ovf:id="primary"></Content>
    </Envelope>
  </data>
</cmd>

The following XML example output is the result of the previous input:

<cmd>
  <action>list-netdev</action>
  <options>-b</options>
  <data version="3.0">
    <Envelope>
      <References/>
      <Content xsi:type="ovf:VirtualSystem_Type" ovf:id="primary">
        <Section xsi:type="ovf:VirtualHardwareSection_Type">
          <Item>
            <rasd:OtherResourceType>network_device</rasd:OtherResourceType>
            <gprop:GenericProperty key="name">aggr0</gprop:GenericProperty>
            <gprop:GenericProperty key="class">AGGR</gprop:GenericProperty>
            <gprop:GenericProperty key="media">ETHER</gprop:GenericProperty>
            <gprop:GenericProperty key="state">down</gprop:GenericProperty>
            <gprop:GenericProperty key="speed">0M</gprop:GenericProperty>
            <gprop:GenericProperty key="over">net2,net3</gprop:GenericProperty>
          </Item>
        </Section>
        <Section xsi:type="ovf:VirtualHardwareSection_Type">
          <Item>
            <rasd:OtherResourceType>network_device</rasd:OtherResourceType>
            <gprop:GenericProperty key="name">net0</gprop:GenericProperty>
            <gprop:GenericProperty key="class">PHYS</gprop:GenericProperty>
            <gprop:GenericProperty key="media">ETHER</gprop:GenericProperty>
            <gprop:GenericProperty key="state">up</gprop:GenericProperty>
            <gprop:GenericProperty key="speed">1000M</gprop:GenericProperty>
            <gprop:GenericProperty key="over">igb0</gprop:GenericProperty>
            <gprop:GenericProperty key="loc">/SYS/MB/NET0</gprop:GenericProperty>
          </Item>
        </Section>
...
      </Content>
    </Envelope>
...
  </data>
...
</cmd>
Example 32  Using the list-netstat Command With XML

The following XML example can be used to run the ldm list-netstat -u K -o net0 ldg1 command. This command lists information about the net0 network device in kilobytes for the ldg1 domain:

<cmd>
  <action>list-netstat</action>
  <data version="3.0">
    <Envelope>
      <References/>
      <Content xsi:type="ovf:VirtualSystem_Type" ovf:id="ldg1">
        <Section xsi:type="ovf:ResourceAllocationSection_Type">
          <Item>
            <gprop:GenericProperty key="network_device">net0</gprop:GenericProperty>
            <gprop:GenericProperty key="byte_unit">K</gprop:GenericProperty>
          </Item>
        </Section>
      </Content>
    </Envelope>
  </data>
</cmd>

The following XML example output is the result of the previous input:

<cmd>
  <action>list-netstat</action>
  <data version="3.0">
    <Envelope>
      <References/>
      <Content xsi:type="ovf:VirtualSystem_Type" ovf:id="ldg1">
        <Section xsi:type="ovf:VirtualHardwareSection_Type">
          <Item>
            <rasd:OtherResourceType>network_stat</rasd:OtherResourceType>
            <gprop:GenericProperty key="name">net0</gprop:GenericProperty>
            <gprop:GenericProperty key="ipackets">509.68K</gprop:GenericProperty>
            <gprop:GenericProperty key="rbytes">43856.31K</gprop:GenericProperty>
            <gprop:GenericProperty key="opackets">4.58K</gprop:GenericProperty>
            <gprop:GenericProperty key="obytes">413.03K</gprop:GenericProperty>
          </Item>
        </Section>
      </Content>
    </Envelope>
...
</cmd>
Example 33  Using the list-io Command With XML

The following XML example can be used to run the ldm list-io command:

<cmd>
    <action>list-io</action>
    <data version="3.0"></data>
</cmd>

The following XML example output is the result of the previous input:

<cmd>
  <action>list-io</action>
  <data version="3.0">
    <Envelope>
      <References/>
      <Section xsi:type="ovf:VirtualHardwareSection_Type">
        <Item>
          <rasd:OtherResourceType>BUS</rasd:OtherResourceType>
          <gprop:GenericProperty key="dev">pci@400</gprop:GenericProperty>
          <gprop:GenericProperty key="alias">/SYS/MB/CMP0/PEX</gprop:GenericProperty>
          <gprop:GenericProperty key="status">IOV</gprop:GenericProperty>
          <gprop:GenericProperty key="domain">primary</gprop:GenericProperty>
          <gprop:GenericProperty key="type">BUS</gprop:GenericProperty>
          <gprop:GenericProperty key="bus">/SYS/MB/CMP0/PEX</gprop:GenericProperty>
        </Item>
        ...
      </Section>
    </Envelope>
  </data>
 ...
</cmd>
Example 34  Using the list-io -l Command With XML

The following XML example can be used to run the ldm list-io -l command:

<cmd>
    <action>list-io</action>
    <options>-l</options>
    <data version="3.0"></data>
</cmd>

The following XML example output is the result of the previous input:

<cmd>
  <action>list-io</action>
    <options>-l</options>
    <data version="3.0">
      <Envelope>
        <References/>
        <Section xsi:type="ovf:VirtualHardwareSection_Type"
..
          <Item>
            <rasd:OtherResourceType>PCIE</rasd:OtherResourceType>
            <gprop:GenericProperty key="dev">pci@400/pci@2/pci@0/pci@8
              </gprop:GenericProperty>
            <gprop:GenericProperty key="alias">/SYS/MB/PCIE0</gprop:GenericProperty>
            <gprop:GenericProperty key="status">OCC</gprop:GenericProperty>
            <gprop:GenericProperty key="domain">primary</gprop:GenericProperty>
            <gprop:GenericProperty key="type">PCIE</gprop:GenericProperty>
            <gprop:GenericProperty key="bus">/SYS/MB/CMP0/PEX</gprop:GenericProperty>
            <gprop:GenericProperty key="subdev">SUNW,emlxs@0/fp/disk
              </gprop:GenericProperty>
            <gprop:GenericProperty key="subdev">SUNW,emlxs@0/fp/tape
              </gprop:GenericProperty>
            <gprop:GenericProperty key="subdev">SUNW,emlxs@0/fp@0,0
              </gprop:GenericProperty>
            <gprop:GenericProperty key="subdev">SUNW,emlxs@0,1/fp/disk
              </gprop:GenericProperty>
            <gprop:GenericProperty key="subdev">SUNW,emlxs@0,1/fp/tape
              </gprop:GenericProperty>
            <gprop:GenericProperty key="subdev">SUNW,emlxs@0,1/fp@0,0
              </gprop:GenericProperty>
          </Item> 
...
            <rasd:OtherResourceType>VF</rasd:OtherResourceType>
            <gprop:GenericProperty key="dev">pci@500/pci@2/pci@0/pci@0/network@0,86
              </gprop:GenericProperty>
            <gprop:GenericProperty key="alias">/SYS/MB/PCIE5/IOVNET.PF0.VF3
              </gprop:GenericProperty>
            <gprop:GenericProperty key="status"/>
            <gprop:GenericProperty key="domain"/>
            <gprop:GenericProperty key="type">VF</gprop:GenericProperty>
            <gprop:GenericProperty key="class">NETWORK</gprop:GenericProperty>
            <gprop:GenericProperty key="bus">/SYS/MB/CMP1/PEX</gprop:GenericProperty>
            <gprop:GenericProperty key="user-assigned-name"/>
            <gprop:GenericProperty key="class:mac-addr">00:14:4f:f8:7f:88
              </gprop:GenericProperty>
            <gprop:GenericProperty key="class:alt-mac-addrs">
              00:14:4f:f9:27:75,00:14:4f:f8:b7:a4</gprop:GenericProperty>
            <gprop:GenericProperty key="class:mtu">1500</gprop:GenericProperty>
          </Item>
        </Section>
      </Envelope>
    </data>
...
</cmd>
Copyright © 2007, 2017, Oracle and/or its affiliates. All rights reserved. 
Previous
Next