5.1 Power On Task Map

Table 5.1 describes the steps for powering on the Oracle PCA at your site.

Table 5.1 Steps for Powering On Oracle Private Cloud Appliance

Step	Description	Links
1	Review the safety precautions, guidelines, site checklists, and site requirements.	Section 5.3.1, “Review Safety Guidelines”
2	Perform preliminary checks before connecting the power cords.	Section 5.3.2, “Inspect Oracle Private Cloud Appliance”
3	Verify the hardware by visually inspecting the system.
4	Connect the Fabric Interconnects and Oracle Switch ES1-24 switches. Also connect a workstation with monitor to the Oracle Switch ES1-24.	Section 5.2, “Before Initial Power On”
5	Supply rack power, and perform the power-on self-test device checks.	Section 5.3.3, “Connect the Power Cords”
6	Switch on the two power distribution unit (PDU) circuit breakers located on the rear of the main PDU (PDU A).	Section 5.3.4, “Power On Oracle Private Cloud Appliance”
7	Power on the management nodes.
8	Wait 5 to 10 minutes and then connect to the Oracle PCA Dashboard.