6 Upgrading an Oracle Data Integrator Standalone Agent Environment from a Previous 12c Release

You can upgrade anOracle Data Integrator standalone agent environment that is not configured in a WebLogic domain from a previous Oracle Fusion Middleware 12c release to 12c (12.2.1.2).

• About the Oracle Data Integrator Standalone Agent Upgrade Process
  Review the flowchart and roadmap for an overview of the upgrade process for an Oracle Data Integrator Standalone agent that is not configured in a WebLogic domain.
• Installing the Oracle Data Integrator Standalone Agent Environment
  Before beginning your upgrade, download the Oracle Data Integrator 12c (12.2.1.2) distribution on the target system and install it using Oracle Universal Installer.
• Stopping Servers and Processes
  Before running the Upgrade Assistant to upgrade your schemas and configurations, you must shut down all processes and servers, including the Administration server and any managed servers.
• Upgrading Product Schemas
  After stopping servers and processes, use the Upgrade Assistant to upgrade supported product schemas to the current release of Oracle Fusion Middleware.
• Upgrading Standalone System Component Configurations
  Use the Upgrade Assistant to upgrade the standalone system component configurations.
• Starting Servers and Processes
  After a successful upgrade, restart all processes and servers, including the Administration Server and any Managed Servers.

6.1 About the Oracle Data Integrator Standalone Agent Upgrade Process

Review the flowchart and roadmap for an overview of the upgrade process for an Oracle Data Integrator Standalone agent that is not configured in a WebLogic domain.

Description of the illustration GUID-2164A366-5734-4588-8D37-6BFA304B1ADD-default.png

Table 6-1 Tasks for Upgrading Oracle Data Integrator Standalone Agent from a Previous 12c Release

Task	Description
Required If you have not done so already, review the introductory topics in this guide and complete the required pre-upgrade tasks.	See: Introduction to Upgrading Oracle Data Integrator to 12c (12.2.1.2) Pre-Upgrade Requirements
Required Install Oracle Data Integrator Standalone 12c (12.2.1.2) in a new Oracle home.	Install the product software in a new Oracle home. See Installing the Oracle Data Integrator Standalone Agent Environment.
Required Shut down the 12c environment (stop all Administration and Managed Servers).	WARNING: Failure to shut down your servers during an upgrade may lead to data corruption. See Stopping Servers and Processes.
Required Start the Upgrade Assistant to upgrade the database schemas and to migrate all active (in flight) instance data.	See Upgrading Product Schemas. NOTE: The upgrade of active instance data is started automatically when running the Upgrade Assistant. Once the data is successfully upgraded to the new 12c (12.2.1.2) environment, you can close the Upgrade Assistant. The closed instances will continue to upgrade through a background process.
Required Start the Upgrade Assistant (again) to upgrade standalone system component configurations.	Run the Upgrade Assistant to upgrade the standalone agent’s component configurations. See Upgrading Standalone System Component Configurations.
Required Restart the servers and the 12c (12.2.1.2) instance.	When the upgrade process is complete, restart the 12c (12.2.1.2) instance. See Starting Servers and Processes.
Required Verify the upgrade.	Ensure all of the upgraded components are working as expected before deleting your backups.

6.2 Installing the Oracle Data Integrator Standalone Agent Environment

Before beginning your upgrade, download the Oracle Data Integrator 12c (12.2.1.2) distribution on the target system and install it using Oracle Universal Installer.

To install the 12c (12.2.1.2) distribution:

1. Sign in to the target system where you want to install the 12c (12.2.1.2) product distribution.
2. Download the following 12c (12.2.1.2) product distribution from Oracle Technology Network or Oracle Software Delivery Cloud to your target system:
   • Oracle Data Integrator (fmw_12.2.1.2.0_odi_Disk1_1of2.zip and fmw_12.2.1.2.0_odi_Disk1_2of2.zip )
3. Change to the directory where you downloaded the 12c (12.2.1.2) product distribution.
4. Unzip the installer fmw_12.2.1.2.0_odi_Disk1_1of2.zip and fmw_12.2.1.2.0_odi_Disk1_2of2.zip files.
5. Enter the following command to start the installer for your product distribution and repeat the steps above to navigate through the installer screens:
   (UNIX) JDK_HOME/bin/java -jar fmw_12.2.1.2.0_odi_generic.jar
   (Windows) JDK_HOME\bin\java -jar fmw_12.2.1.2.0_odi_generic.jar
6. On UNIX operating systems, the Installation Inventory Setup screen appears if this is the first time you are installing an Oracle product on this host.
   Specify the location where you want to create your central inventory. Make sure that the operating system group name selected on this screen has write permissions to the central inventory location and click Next.

   Note:

   The Installation Inventory Setup screen does not appear on Windows operating systems.
7. On the Welcome screen, review the information to make sure that you have met all the prerequisites. Click Next.
8. On the Auto Updates screen, select Skip Auto Updates. Options are:

   • Skip Auto Updates: If you do not want your system to check for software updates at this time.

   • Select patches from directory: To navigate to a local directory if you downloaded patch files.

   • Search My Oracle Support for Updates: To automatically download software updates if you have a My Oracle Support account. You must enter Oracle Support credentials then click Search. To configure a proxy server for the installer to access My Oracle Support, click Proxy Settings. Click Test Connection to test the connection.

   Click Next.
9. On the Installation Location screen, specify the location for the Oracle home directory and click Next.
   For more information about Oracle Fusion Middleware directory structure, see Understanding Directories for Installation and Configuration in Oracle Fusion Middleware Planning an Installation of Oracle Fusion Middleware.
10. On the Installation Type screen, select Standalone Installation.
    Click Next.
11. The Prerequisite Checks screen analyzes the host computer to ensure that the specific operating system prerequisites have been met.
    To view the list of tasks that gets verified, select View Successful Tasks. To view log details, select View Log. If any prerequisite check fails, then an error message appears at the bottom of the screen. Fix the error and click Rerun to try again. To ignore the error or the warning message and continue with the installation, click Skip (not recommended).
12. On the Installation Summary screen, verify the installation options you selected.
    If you want to save these options to a response file, click Save Response File and enter the response file location and name. The response file collects and stores all the information that you have entered, and enables you to perform a silent installation (from the command line) at a later time.

    Click Install to begin the installation.

13. On the Installation Progress screen, when the progress bar displays 100%, click Finish to dismiss the installer, or click Next to see a summary.
14. The Installation Complete screen displays the Installation Location and the Feature Sets that are installed. Review this information and click Finish to close the installer.

6.3 Stopping Servers and Processes

Before running the Upgrade Assistant to upgrade your schemas and configurations, you must shut down all processes and servers, including the Administration server and any managed servers.

An Oracle Fusion Middleware environment can consist of an Oracle WebLogic Server domain, an Administration Server, multiple managed servers, Java components, system components such as Identity Management components, and a database used as a repository for metadata. The components may be dependent on each other so they must be stopped in the correct order.

Note:

The procedures in this section describe how to stop servers and processes using the WLST command-line utility or a script. You can also use the Oracle Fusion Middleware Control and the Oracle WebLogic Server Administration Console. See Starting and Stopping Administration and Managed Servers and Node Manager in Administering Oracle Fusion Middleware.

To stop your Fusion Middleware environment, follow the steps below.

Step 1: Stop System Components

To stop system components, such as Oracle HTTP Server, use the stopComponent script:

• (UNIX) DOMAIN_HOME/bin/stopComponent.sh component_name

• (Windows) DOMAIN_HOME\bin\stopComponent.cmd component_name

You can stop system components in any order.

Step 2: Stop the Managed Servers

To stop a WebLogic Server Managed Server, use the stopManagedWebLogic script:

• (UNIX) DOMAIN_HOME/bin/stopManagedWebLogic.sh managed_server_name admin_url

• (Windows) DOMAIN_HOME\bin\stopManagedWebLogic.cmd managed_server_name admin_url

When prompted, enter your user name and password.

Step 3: Stop Oracle Identity Management Components

Stop any Oracle Identity Management components, such as Oracle Internet Directory, that form part of your environment:

• (UNIX) DOMAIN_HOME/bin/stopComponent.sh component_name

• (Windows) DOMAIN_HOME\bin\stopComponent.cmd component_name

Step 4: Stop the Administration Server

When you stop the Administration Server, you also stop the processes running in the Administration Server, including the WebLogic Server Administration Console and Fusion Middleware Control.

To stop the Administration Server, use the stopWebLogic script:

• (UNIX) DOMAIN_HOME/bin/stopWebLogic.sh

• (Windows) DOMAIN_HOME\bin\stopWebLogic.cmd

When prompted, enter your user name, password, and the URL of the Administration Server.

Note:

If external password storage is set up for the repository, then the server hosting the credential store should be up and running so that the work repository password can be retrieved during upgrade. For more information, see Setting Up External Password Storage in Oracle Fusion Middleware Administering Oracle Data Integrator.

Step 5: Stop Node Manager

To stop Node Manager, close the command shell in which it is running.

Alternatively, after having set the nodemanager.properties attribute QuitEnabled to true (the default is false), you can use WLST to connect to Node Manager and shut it down. For more information, see stopNodeManager in Oracle Fusion Middleware WLST Command Reference for WebLogic Server.

6.4 Upgrading Product Schemas

After stopping servers and processes, use the Upgrade Assistant to upgrade supported product schemas to the current release of Oracle Fusion Middleware.

The Upgrade Assistant allows you to upgrade individually selected schemas or all schemas associated with a domain. The option you select determines which Upgrade Assistant screens you will use.

• Starting the Upgrade Assistant
  Run the Upgrade Assistant to upgrade product schemas, domain component configurations, or standalone system components to 12c (12.2.1.2). Oracle recommends that you run the Upgrade Assistant as a non-SYSDBA user, completing the upgrade for one domain at a time.
• Upgrading Product Schemas Using the Upgrade Assistant
  Navigate through the screens in the Upgrade Assistant to upgrade the product schemas.
• Verifying the Schema Upgrade
  After completing all the upgrade steps, verify that the upgrade was successful by checking that the schema version in schema_version_registry has been properly updated.

6.4.1 Starting the Upgrade Assistant

Run the Upgrade Assistant to upgrade product schemas, domain component configurations, or standalone system components to 12c (12.2.1.2). Oracle recommends that you run the Upgrade Assistant as a non-SYSDBA user, completing the upgrade for one domain at a time.

To start the Upgrade Assistant:

1. Go to the oracle_common/upgrade/bin directory:
   • (UNIX) ORACLE_HOME/oracle_common/upgrade/bin
   • (Windows) ORACLE_HOME\oracle_common\upgrade\bin
2. Start the Upgrade Assistant:
   • (UNIX) ./ua
   • (Windows) ua.bat

For information about other parameters that you can specify on the command line, such as logging parameters, see:

• Upgrade Assistant Command-Line Parameters
  

6.4.1.1 Upgrade Assistant Command-Line Parameters

When you start the Upgrade Assistant from the command-line, you can specify additional parameters.

Table 6-2 Upgrade Assistant Command Line Parameters

Parameter	Required or Optional	Description
-readiness	Required for readiness checks NOTE: Readiness checks cannot be performed on standalone installations (those not managed by the WebLogic Server).	Performs the upgrade readiness check without performing an actual upgrade. Schemas and configurations are checked. Do not use this parameter if you have specified the -examine parameter.
-threads	Optional	Identifies the number of threads available for concurrent schema upgrades or readiness checks of the schemas. The value must be a positive integer in the range 1 to 8. The default is 4.
-response	Required for silent upgrades or silent readiness checks	Runs the Upgrade Assistant using inputs saved to a response file generated from the data that is entered when the Upgrade Assistant is run in GUI mode. Using this parameter runs the the Upgrade Assistant in silent mode (without displaying Upgrade Assistant screens).
-examine	Optional	Performs the examine phase but does not perform an actual upgrade. Do not specify this parameter if you have specified the -readiness parameter.
-logLevel attribute	Optional	Sets the logging level, specifying one of the following attributes: TRACE NOTIFICATION WARNING ERROR INCIDENT_ERROR The default logging level is NOTIFICATION. Consider setting the -logLevel TRACE attribute to so that more information is logged. This is useful when troubleshooting a failed upgrade. The Upgrade Assistant's log files can become very large if -logLevel TRACE is used.
-logDir location	Optional	Sets the default location of upgrade log files and temporary files. You must specify an existing, writable directory where the Upgrade Assistant will create log files and temporary files. The default locations are: (UNIX) ORACLE_HOME/oracle_common/upgrade/logs ORACLE_HOME/oracle_common/upgrade/temp (Windows) ORACLE_HOME\oracle_common\upgrade\logs ORACLE_HOME\oracle_common\upgrade\temp
-help	Optional	Displays all of the command-line options.

6.4.2 Upgrading Product Schemas Using the Upgrade Assistant

Navigate through the screens in the Upgrade Assistant to upgrade the product schemas.

Notes

• If you are using external authentication, make sure that external authentication is changed to internal authentication.

• Edition-based redefinition (EBR) Users Only: Before upgrading an Edition-Based Redefinition (EBR) enabled schema, you must connect to the database server and create an edition on the database server for 12c. The new edition for 12c must be a child of your existing 12c edition. For more information on creating an edition on the server for redefinition, see Creating an Edition on the Server for Editions-Based Redefinition.

To upgrade product schemas with the Upgrade Assistant:

1. On the Welcome screen, review an introduction to the Upgrade Assistant and information about important pre-upgrade tasks. Click Next.

   Note:

   For more information about any Upgrade Assistant screen, click Help on the screen.
2. On the Selected Schemas screen, select Individually Selected Schemas.

   Caution:

   Upgrade only those schemas that are used to support your 12c (12.2.1.2) components. Do not upgrade schemas that are currently being used to support components that are not included in Oracle Fusion Middleware 12c (12.2.1.2).

   Click Next.

3. On the Available Components screen, select Oracle Data Integrator to upgrade the Master and Work Repository schema.
4. On the Prerequisites screen, acknowledge that the prerequisites have been met by selecting all the check boxes. Click Next.

   Note:

   The Upgrade Assistant does not verify whether the prerequisites have been met.
5. On the ODI Schema screen, specify the database connection details for each schema you are upgrading:

   • Select the database type from the Database Type drop-down menu.

   • Enter the database connection details, and click Connect.

   • Select the schema you want to upgrade from the Schema User Name drop-down menu, and then enter the password for the schema. Be sure to use the correct schema prefix for the schemas you are upgrading.

6. On the ODI Options screen, select all of the options.

   Table 6-3 ODI Options

   Option	Description
   Replace Knowledge Modules with mandatory updates	This selection replaces standard Knowledge Modules with the newest version. Customizations to Oracle installed Knowledge Modules will be overwritten. But if you copy an installed Knowledge Module and customize the Knowledge Module, the customizations are not lost.
   Upgrade topology and security metadata	This selection replaces topology and security artifacts such as Technologies, Datatypes, Security Profiles and others with the newest version. Customizations of installed objects will be overwritten. If the object is copied and customized, then the customizations are not lost.

   For information on advanced upgrade options, see Advanced Upgrade Options.

7. On the ODI Supervisor screen, enter the Supervisor account credentials for the ODI repository to be upgraded.

   The installed Supervisor account is SUPERVISOR. Check with your ODI administrator for proper Supervisor account name and password, supplied when prompted by the Repository Creation Utility (RCU) when creating the Master and Work repositories for ODI.

   
   Description of the illustration GUID-7CDFA583-C70D-4F84-B6CC-783B36C85619-default.gif

   Note:

   When All Schemas Used by a Domain is selected, the Supervisor credentials for ODI are not pre-populated in the first instance as the domain does not contain them. If there are multiple ODI schemas, the Upgrade Assistant populates the user entry using the first set of credentials.
8. On the Examine screen, review the status of the Upgrade Assistant as it examines each schema, verifying that the schema is ready for upgrade. If the status is Examine finished, click Next.
   If the examine phase fails, Oracle recommends that you cancel the upgrade by clicking No in the Examination Failure dialog. Click View Log to see what caused the error and refer to Troubleshooting Your Upgrade in Oracle Fusion Middleware Upgrading with the Upgrade Assistant Upgrade Guide for information on resolving common upgrade errors.

   Note:

   • If you resolve any issues detected during the examine phase without proceeding with the upgrade, you can start the Upgrade Assistant again without restoring from backup. However, if you proceed by clicking Yes in the Examination Failure dialog box, you need to restore your pre-upgrade environment from backup before starting the Upgrade Assistant again.

   • Canceling the examination process has no effect on the schemas or configuration data; the only consequence is that the information the Upgrade Assistant has collected must be collected again in a future upgrade session.

9. On the Upgrade Summary screen, review the summary of the options you have selected for schema upgrade.
   Verify that the correct Source and Target Versions are listed for each schema you intend to upgrade.
   If you want to save these options to a response file to run the Upgrade Assistant again later in response (or silent) mode, click Save Response File and provide the location and name of the response file. A silent upgrade performs exactly the same function that the Upgrade Assistant performs, but you do not have to manually enter the data again.
   Click Upgrade to start the upgrade process.
10. On the Upgrade Progress screen, monitor the status of the upgrade.

    Caution:

    Allow the Upgrade Assistant enough time to perform the upgrade. Do not cancel the upgrade operation unless absolutely necessary. Doing so may result in an unstable environment.
    If any schemas are not upgraded successfully, refer to the Upgrade Assistant log files for more information.

    Note:

    The progress bar on this screen displays the progress of the current upgrade procedure. It does not indicate the time remaining for the upgrade.

    Click Next.

11. If the upgrade is successful: On the Upgrade Success screen, click Close to complete the upgrade and close the wizard.

    If the upgrade fails: On the Upgrade Failure screen, click View Log to view and troubleshoot the errors. The logs are available at ORACLE_HOME/oracle_common/upgrade/logs.

    Note:

    If the upgrade fails, you must restore your pre-upgrade environment from backup, fix the issues, then restart the Upgrade Assistant.

6.4.3 Verifying the Schema Upgrade

After completing all the upgrade steps, verify that the upgrade was successful by checking that the schema version in schema_version_registry has been properly updated.

If you are using an Oracle database, connect to the database as a user having Oracle DBA privileges, and run the following from SQL*Plus to get the current version numbers:

SET LINE 120
COLUMN MRC_NAME FORMAT A14
COLUMN COMP_ID FORMAT A20
COLUMN VERSION FORMAT A12
COLUMN STATUS FORMAT A9
COLUMN UPGRADED FORMAT A8
SELECT MRC_NAME, COMP_ID, OWNER, VERSION, STATUS, UPGRADED FROM SCHEMA_VERSION_REGISTRY ORDER BY MRC_NAME, COMP_ID ;

In the query result:

• Check that the number in the VERSION column matches the latest version number for that schema. For example, verify that the schema version number is 12.2.1.2.0 . Note, however, that not all schema versions will be updated. Some schemas do not require an upgrade to this release and will retain their pre-upgrade version number.

• The STATUS field will be either UPGRADING or UPGRADED during the schema patching operation, and will become VALID when the operation is completed.

• If the status appears as INVALID, the schema update failed. You should examine the logs files to determine the reason for the failure.

• Synonym objects owned by IAU_APPEND and IAU_VIEWER will appear as INVALID, but that does not indicate a failure.

  They become invalid because the target object changes after the creation of the synonym. The synonyms objects will become valid when they are accessed. You can safely ignore these INVALID objects.

6.5 Upgrading Standalone System Component Configurations

Use the Upgrade Assistant to upgrade the standalone system component configurations.

• Starting the Upgrade Assistant
  Run the Upgrade Assistant to upgrade product schemas, domain component configurations, or standalone system components to 12c (12.2.1.2). Oracle recommends that you run the Upgrade Assistant as a non-SYSDBA user, completing the upgrade for one domain at a time.
• Upgrading Standalone System Component Configurations Using the Upgrade Assistant
  Navigate through the screens in the Upgrade Assistant to upgrade standalone system component configurations.

6.5.1 Starting the Upgrade Assistant

Run the Upgrade Assistant to upgrade product schemas, domain component configurations, or standalone system components to 12c (12.2.1.2). Oracle recommends that you run the Upgrade Assistant as a non-SYSDBA user, completing the upgrade for one domain at a time.

To start the Upgrade Assistant:

1. Go to the oracle_common/upgrade/bin directory:
   • (UNIX) ORACLE_HOME/oracle_common/upgrade/bin
   • (Windows) ORACLE_HOME\oracle_common\upgrade\bin
2. Start the Upgrade Assistant:
   • (UNIX) ./ua
   • (Windows) ua.bat

For information about other parameters that you can specify on the command line, such as logging parameters, see:

• Upgrade Assistant Command-Line Parameters
  

6.5.1.1 Upgrade Assistant Command-Line Parameters

When you start the Upgrade Assistant from the command-line, you can specify additional parameters.

Table 6-4 Upgrade Assistant Command Line Parameters

Parameter	Required or Optional	Description
-readiness	Required for readiness checks NOTE: Readiness checks cannot be performed on standalone installations (those not managed by the WebLogic Server).	Performs the upgrade readiness check without performing an actual upgrade. Schemas and configurations are checked. Do not use this parameter if you have specified the -examine parameter.
-threads	Optional	Identifies the number of threads available for concurrent schema upgrades or readiness checks of the schemas. The value must be a positive integer in the range 1 to 8. The default is 4.
-response	Required for silent upgrades or silent readiness checks	Runs the Upgrade Assistant using inputs saved to a response file generated from the data that is entered when the Upgrade Assistant is run in GUI mode. Using this parameter runs the the Upgrade Assistant in silent mode (without displaying Upgrade Assistant screens).
-examine	Optional	Performs the examine phase but does not perform an actual upgrade. Do not specify this parameter if you have specified the -readiness parameter.
-logLevel attribute	Optional	Sets the logging level, specifying one of the following attributes: TRACE NOTIFICATION WARNING ERROR INCIDENT_ERROR The default logging level is NOTIFICATION. Consider setting the -logLevel TRACE attribute to so that more information is logged. This is useful when troubleshooting a failed upgrade. The Upgrade Assistant's log files can become very large if -logLevel TRACE is used.
-logDir location	Optional	Sets the default location of upgrade log files and temporary files. You must specify an existing, writable directory where the Upgrade Assistant will create log files and temporary files. The default locations are: (UNIX) ORACLE_HOME/oracle_common/upgrade/logs ORACLE_HOME/oracle_common/upgrade/temp (Windows) ORACLE_HOME\oracle_common\upgrade\logs ORACLE_HOME\oracle_common\upgrade\temp
-help	Optional	Displays all of the command-line options.

6.5.2 Upgrading Standalone System Component Configurations Using the Upgrade Assistant

Navigate through the screens in the Upgrade Assistant to upgrade standalone system component configurations.

To upgrade standalone system component configurations with the Upgrade Assistant:

1. On the Welcome screen, review an introduction to the Upgrade Assistant and information about important pre-upgrade tasks. Click Next.

   Note:

   For more information about any Upgrade Assistant screen, click Help on the screen.
2. On the next screen:

   • Select Standalone System Component Configurations, then select Update an Existing Domain .

   • In the Domain Location field, select the location of the existing standalone domain that you want to update

     .

   • Click Next.

3. On the Component List screen, verify that the list includes all the components for which you want to upgrade configurations and click Next.
   If you do not see the components you want to upgrade, click Back to go to the previous screen and specify a different domain.
4. On the Prerequisites screen, acknowledge that the prerequisites have been met by selecting all the check boxes. Click Next.

   Note:

   The Upgrade Assistant does not verify whether the prerequisites have been met.
5. On the Instance Directories screen, specify the location of one or more Oracle instance directories to be upgraded.
6. On the Node Manager screen, specify the credentials of the Node Manager that will be used to create a domain during the upgrade of standalone system components.
7. On the Examine screen, review the status of the Upgrade Assistant as it examines each standalone component, verifying that the standalone component configuration is ready for upgrade. If the status is Examine finished, click Next.
   If the examine phase fails, Oracle recommends that you cancel the upgrade by clicking No in the Examination Failure dialog. Click View Log to see what caused the error and refer to Troubleshooting Your Upgrade in Oracle Fusion Middleware Upgrading with the Upgrade Assistant Upgrade Guidefor information on resolving common upgrade errors.

   Note:

   • If you resolve any issues detected during the examine phase without proceeding with the upgrade, you can start the Upgrade Assistant again without restoring from backup. However, if you proceed by clicking Yes in the Examination Failure dialog box, you need to restore your pre-upgrade environment from backup before starting the Upgrade Assistant again.

   • Canceling the examination process has no effect on the configuration data; the only consequence is that the information the Upgrade Assistant has collected must be collected again in a future upgrade session.

8. On the Upgrade Summary screen, review the summary of the options you have selected for component configuration upgrade.
   The response file collects and stores all the information that you have entered, and enables you to perform a silent upgrade at a later time. The silent upgrade performs exactly the same function that the Upgrade Assistant performs, but you do not have to manually enter the data again. If you want to save these options to a response file, click Save Response File and provide the location and name of the response file.
   Click Upgrade to start the upgrade process.
9. On the Upgrade Progress screen, monitor the status of the upgrade.

   Caution:

   Allow the Upgrade Assistant enough time to perform the upgrade. Do not cancel the upgrade operation unless absolutely necessary. Doing so may result in an unstable environment.
   If any components are not upgraded successfully, refer to the Upgrade Assistant log files for more information.

   Note:

   The progress bar on this screen displays the progress of the current upgrade procedure. It does not indicate the time remaining for the upgrade.

   Click Next.

10. If the upgrade is successful: On the Upgrade Success screen, click Close to complete the upgrade and close the wizard. The Post-Upgrade Actions window describes the manual tasks you must perform to make components functional in the new installation. This window appears only if a component has post-upgrade steps.

    If the upgrade fails: On the Upgrade Failure screen, click View Log to view and troubleshoot the errors. The logs are available at ORACLE_HOME/oracle_common/upgrade/logs. Note If the upgrade fails you must restore your pre-upgrade environment from backup, fix the issues, then restart the Upgrade Assistant.

6.6 Starting Servers and Processes

After a successful upgrade, restart all processes and servers, including the Administration Server and any Managed Servers.

The components may be dependent on each other so they must be started in the correct order.

Note:

The procedures in this section describe how to start servers and process using the WLST command line or a script. You can also use the Oracle Fusion Middleware Control and the Oracle WebLogic Server Administration Console. See Starting and Stopping Administration and Managed Servers and Node Manager in Administering Oracle Fusion Middleware.

To start your Fusion Middleware environment, follow the steps below.

Step 1: Start the Administration Server

When you start the Administration Server, you also start the processes running in the Administration Server, including the WebLogic Server Administration Console and Fusion Middleware Control.

To start the Administration Server, use the startWebLogic script:

• (UNIX) DOMAIN_HOME/bin/startWebLogic.sh

• (Windows) DOMAIN_HOME\bin\startWebLogic.cmd

When prompted, enter your user name, password, and the URL of the Administration Server.

Step 2: Start Node Manager

To start Node Manager, use the startNodeManager script:

• (UNIX) DOMAIN_HOME/bin/startNodeManager.sh

• (Windows) DOMAIN_HOME\bin\startNodeManager.cmd

Step 3: Start Oracle Identity Management Components

Start any Oracle Identity Management components, such as Oracle Internet Directory, that form part of your environment:

• (UNIX) DOMAIN_HOME/bin/startComponent.sh component_name

• (Windows) DOMAIN_HOME\bin\startComponent.cmd component_name

Step 4: Start the Managed Servers

To start a WebLogic Server Managed Server, use the startManagedWebLogic script:

• (UNIX) DOMAIN_HOME/bin/startManagedWebLogic.sh managed_server_name admin_url

• (Windows) DOMAIN_HOME\bin\startManagedWebLogic.cmd managed_server_name admin_url

When prompted, enter your user name and password.

Note:

The startup of a Managed Server will typically start the applications that are deployed to it. Therefore, it should not be necessary to manually start applications after the Managed Server startup.

Step 5: Start System Components

To start system components, such as Oracle HTTP Server, use the startComponent script:

• (UNIX) DOMAIN_HOME/bin/startComponent.sh component_name

• (Windows) DOMAIN_HOME\bin\startComponent.cmd component_name

You can start system components in any order.