Module java.base

Package java.nio.charset

Class CharsetDecoder

java.lang.Object

java.nio.charset.CharsetDecoder

public abstract class CharsetDecoder
extends Object

An engine that can transform a sequence of bytes in a specific charset into a sequence of sixteen-bit Unicode characters.

The input byte sequence is provided in a byte buffer or a series of such buffers. The output character sequence is written to a character buffer or a series of such buffers. A decoder should always be used by making the following sequence of method invocations, hereinafter referred to as a decoding operation:

1. Reset the decoder via the reset method, unless it has not been used before;

2. Invoke the decode method zero or more times, as long as additional input may be available, passing false for the endOfInput argument and filling the input buffer and flushing the output buffer between invocations;

3. Invoke the decode method one final time, passing true for the endOfInput argument; and then

4. Invoke the flush method so that the decoder can flush any internal state to the output buffer.

Each invocation of the decode method will decode as many bytes as possible from the input buffer, writing the resulting characters to the output buffer. The decode method returns when more input is required, when there is not enough room in the output buffer, or when a decoding error has occurred. In each case a CoderResult object is returned to describe the reason for termination. An invoker can examine this object and fill the input buffer, flush the output buffer, or attempt to recover from a decoding error, as appropriate, and try again.

There are two general types of decoding errors. If the input byte sequence is not legal for this charset then the input is considered malformed. If the input byte sequence is legal but cannot be mapped to a valid Unicode character then an unmappable character has been encountered.

How a decoding error is handled depends upon the action requested for that type of error, which is described by an instance of the CodingErrorAction class. The possible error actions are to ignore the erroneous input, report the error to the invoker via the returned CoderResult object, or replace the erroneous input with the current value of the replacement string. The replacement has the initial value "\uFFFD"; its value may be changed via the replaceWith method.

The default action for malformed-input and unmappable-character errors is to report them. The malformed-input error action may be changed via the onMalformedInput method; the unmappable-character action may be changed via the onUnmappableCharacter method.

This class is designed to handle many of the details of the decoding process, including the implementation of error actions. A decoder for a specific charset, which is a concrete subclass of this class, need only implement the abstract decodeLoop method, which encapsulates the basic decoding loop. A subclass that maintains internal state should, additionally, override the implFlush and implReset methods.

Instances of this class are not safe for use by multiple concurrent threads.

Since:

1.4

See Also:

• ByteBuffer
• CharBuffer
• Charset
• CharsetEncoder

Constructor Summary

Constructors

Modifier	Constructor	Description
protected	CharsetDecoder(Charset cs, float averageCharsPerByte, float maxCharsPerByte)	Initializes a new decoder.

Method Summary

Modifier and Type	Method	Description
final float	averageCharsPerByte()	Returns the average number of characters that will be produced for each byte of input.
final Charset	charset()	Returns the charset that created this decoder.
final CharBuffer	decode(ByteBuffer in)	Convenience method that decodes the remaining content of a single input byte buffer into a newly-allocated character buffer.
final CoderResult	decode(ByteBuffer in, CharBuffer out, boolean endOfInput)	Decodes as many bytes as possible from the given input buffer, writing the results to the given output buffer.
protected abstract CoderResult	decodeLoop(ByteBuffer in, CharBuffer out)	Decodes one or more bytes into one or more characters.
Charset	detectedCharset()	Retrieves the charset that was detected by this decoder (optional operation).
final CoderResult	flush(CharBuffer out)	Flushes this decoder.
protected CoderResult	implFlush(CharBuffer out)	Flushes this decoder.
protected void	implOnMalformedInput(CodingErrorAction newAction)	Reports a change to this decoder's malformed-input action.
protected void	implOnUnmappableCharacter(CodingErrorAction newAction)	Reports a change to this decoder's unmappable-character action.
protected void	implReplaceWith(String newReplacement)	Reports a change to this decoder's replacement value.
protected void	implReset()	Resets this decoder, clearing any charset-specific internal state.
boolean	isAutoDetecting()	Tells whether or not this decoder implements an auto-detecting charset.
boolean	isCharsetDetected()	Tells whether or not this decoder has yet detected a charset (optional operation).
CodingErrorAction	malformedInputAction()	Returns this decoder's current action for malformed-input errors.
final float	maxCharsPerByte()	Returns the maximum number of characters that will be produced for each byte of input.
final CharsetDecoder	onMalformedInput(CodingErrorAction newAction)	Changes this decoder's action for malformed-input errors.
final CharsetDecoder	onUnmappableCharacter(CodingErrorAction newAction)	Changes this decoder's action for unmappable-character errors.
final String	replacement()	Returns this decoder's replacement value.
final CharsetDecoder	replaceWith(String newReplacement)	Changes this decoder's replacement value.
final CharsetDecoder	reset()	Resets this decoder, clearing any internal state.
CodingErrorAction	unmappableCharacterAction()	Returns this decoder's current action for unmappable-character errors.

Methods declared in class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Details

CharsetDecoder

protected CharsetDecoder(Charset cs,
 float averageCharsPerByte,
 float maxCharsPerByte)

Initializes a new decoder. The new decoder will have the given chars-per-byte values and its replacement will be the string "\uFFFD".

Parameters:

cs - The charset that created this decoder

averageCharsPerByte - A positive float value indicating the expected number of characters that will be produced for each input byte

maxCharsPerByte - A positive float value indicating the maximum number of characters that will be produced for each input byte

Throws:

IllegalArgumentException - If the preconditions on the parameters do not hold

Method Details

charset

public final Charset charset()

Returns the charset that created this decoder.

Returns:

This decoder's charset

replacement

public final String replacement()

Returns this decoder's replacement value.

Returns:

This decoder's current replacement, which is never null and is never empty

replaceWith

public final CharsetDecoder replaceWith(String newReplacement)

Changes this decoder's replacement value.

This method invokes the implReplaceWith method, passing the new replacement, after checking that the new replacement is acceptable.

Parameters:

newReplacement - The new replacement; must not be null, must have non-zero length, and must not be longer than the value returned by the maxCharsPerByte method

Returns:

This decoder

Throws:

IllegalArgumentException - If the preconditions on the parameter do not hold

implReplaceWith

protected void implReplaceWith(String newReplacement)

Reports a change to this decoder's replacement value.

The default implementation of this method does nothing. This method should be overridden by decoders that require notification of changes to the replacement.

Parameters:

newReplacement - The replacement value

malformedInputAction

public CodingErrorAction malformedInputAction()

Returns this decoder's current action for malformed-input errors.

Returns:

The current malformed-input action, which is never null

onMalformedInput

public final CharsetDecoder onMalformedInput(CodingErrorAction newAction)

Changes this decoder's action for malformed-input errors.

This method invokes the implOnMalformedInput method, passing the new action.

Parameters:

newAction - The new action; must not be null

Returns:

This decoder

Throws:

IllegalArgumentException - If the precondition on the parameter does not hold

implOnMalformedInput

protected void implOnMalformedInput(CodingErrorAction newAction)

Reports a change to this decoder's malformed-input action.

The default implementation of this method does nothing. This method should be overridden by decoders that require notification of changes to the malformed-input action.

Parameters:

newAction - The new action

unmappableCharacterAction

public CodingErrorAction unmappableCharacterAction()

Returns this decoder's current action for unmappable-character errors.

Returns:

The current unmappable-character action, which is never null

onUnmappableCharacter

public final CharsetDecoder onUnmappableCharacter(CodingErrorAction newAction)

Changes this decoder's action for unmappable-character errors.

This method invokes the implOnUnmappableCharacter method, passing the new action.

Parameters:

newAction - The new action; must not be null

Returns:

This decoder

Throws:

IllegalArgumentException - If the precondition on the parameter does not hold

implOnUnmappableCharacter

protected void implOnUnmappableCharacter(CodingErrorAction newAction)

Reports a change to this decoder's unmappable-character action.

The default implementation of this method does nothing. This method should be overridden by decoders that require notification of changes to the unmappable-character action.

Parameters:

newAction - The new action

averageCharsPerByte

public final float averageCharsPerByte()

Returns the average number of characters that will be produced for each byte of input. This heuristic value may be used to estimate the size of the output buffer required for a given input sequence.

Returns:

The average number of characters produced per byte of input

maxCharsPerByte

public final float maxCharsPerByte()

Returns the maximum number of characters that will be produced for each byte of input. This value may be used to compute the worst-case size of the output buffer required for a given input sequence. This value accounts for any necessary content-independent prefix or suffix characters.

Returns:

The maximum number of characters that will be produced per byte of input

decode

public final CoderResult decode(ByteBuffer in,
 CharBuffer out,
 boolean endOfInput)

Decodes as many bytes as possible from the given input buffer, writing the results to the given output buffer.

The buffers are read from, and written to, starting at their current positions. At most in.remaining() bytes will be read and at most out.remaining() characters will be written. The buffers' positions will be advanced to reflect the bytes read and the characters written, but their marks and limits will not be modified.

In addition to reading bytes from the input buffer and writing characters to the output buffer, this method returns a CoderResult object to describe its reason for termination:

• CoderResult.UNDERFLOW indicates that as much of the input buffer as possible has been decoded. If there is no further input then the invoker can proceed to the next step of the decoding operation. Otherwise this method should be invoked again with further input.

• CoderResult.OVERFLOW indicates that there is insufficient space in the output buffer to decode any more bytes. This method should be invoked again with an output buffer that has more remaining characters. This is typically done by draining any decoded characters from the output buffer.

• A malformed-input result indicates that a malformed-input error has been detected. The malformed bytes begin at the input buffer's (possibly incremented) position; the number of malformed bytes may be determined by invoking the result object's length method. This case applies only if the malformed action of this decoder is CodingErrorAction.REPORT; otherwise the malformed input will be ignored or replaced, as requested.

• An unmappable-character result indicates that an unmappable-character error has been detected. The bytes that decode the unmappable character begin at the input buffer's (possibly incremented) position; the number of such bytes may be determined by invoking the result object's length method. This case applies only if the unmappable action of this decoder is CodingErrorAction.REPORT; otherwise the unmappable character will be ignored or replaced, as requested.

In any case, if this method is to be reinvoked in the same decoding operation then care should be taken to preserve any bytes remaining in the input buffer so that they are available to the next invocation.

The endOfInput parameter advises this method as to whether the invoker can provide further input beyond that contained in the given input buffer. If there is a possibility of providing additional input then the invoker should pass false for this parameter; if there is no possibility of providing further input then the invoker should pass true. It is not erroneous, and in fact it is quite common, to pass false in one invocation and later discover that no further input was actually available. It is critical, however, that the final invocation of this method in a sequence of invocations always pass true so that any remaining undecoded input will be treated as being malformed.

This method works by invoking the decodeLoop method, interpreting its results, handling error conditions, and reinvoking it as necessary.

Parameters:

in - The input byte buffer

out - The output character buffer

endOfInput - true if, and only if, the invoker can provide no additional input bytes beyond those in the given buffer

Returns:

A coder-result object describing the reason for termination

Throws:

IllegalStateException - If a decoding operation is already in progress and the previous step was an invocation neither of the reset method, nor of this method with a value of false for the endOfInput parameter, nor of this method with a value of true for the endOfInput parameter but a return value indicating an incomplete decoding operation

CoderMalfunctionError - If an invocation of the decodeLoop method threw an unexpected exception

flush

public final CoderResult flush(CharBuffer out)

Flushes this decoder.

Some decoders maintain internal state and may need to write some final characters to the output buffer once the overall input sequence has been read.

Any additional output is written to the output buffer beginning at its current position. At most out.remaining() characters will be written. The buffer's position will be advanced appropriately, but its mark and limit will not be modified.

If this method completes successfully then it returns CoderResult.UNDERFLOW. If there is insufficient room in the output buffer then it returns CoderResult.OVERFLOW. If this happens then this method must be invoked again, with an output buffer that has more room, in order to complete the current decoding operation.

If this decoder has already been flushed then invoking this method has no effect.

This method invokes the implFlush method to perform the actual flushing operation.

Parameters:

out - The output character buffer

Returns:

A coder-result object, either CoderResult.UNDERFLOW or CoderResult.OVERFLOW

Throws:

IllegalStateException - If the previous step of the current decoding operation was an invocation neither of the flush method nor of the three-argument decode method with a value of true for the endOfInput parameter

implFlush

protected CoderResult implFlush(CharBuffer out)

Flushes this decoder.

The default implementation of this method does nothing, and always returns CoderResult.UNDERFLOW. This method should be overridden by decoders that may need to write final characters to the output buffer once the entire input sequence has been read.

Parameters:

out - The output character buffer

Returns:

A coder-result object, either CoderResult.UNDERFLOW or CoderResult.OVERFLOW

reset

public final CharsetDecoder reset()

Resets this decoder, clearing any internal state.

This method resets charset-independent state and also invokes the implReset method in order to perform any charset-specific reset actions.

Returns:

This decoder

implReset

protected void implReset()

Resets this decoder, clearing any charset-specific internal state.

The default implementation of this method does nothing. This method should be overridden by decoders that maintain internal state.

decodeLoop

protected abstract CoderResult decodeLoop(ByteBuffer in,
 CharBuffer out)

Decodes one or more bytes into one or more characters.

This method encapsulates the basic decoding loop, decoding as many bytes as possible until it either runs out of input, runs out of room in the output buffer, or encounters a decoding error. This method is invoked by the decode method, which handles result interpretation and error recovery.

The buffers are read from, and written to, starting at their current positions. At most in.remaining() bytes will be read, and at most out.remaining() characters will be written. The buffers' positions will be advanced to reflect the bytes read and the characters written, but their marks and limits will not be modified.

This method returns a CoderResult object to describe its reason for termination, in the same manner as the decode method. Most implementations of this method will handle decoding errors by returning an appropriate result object for interpretation by the decode method. An optimized implementation may instead examine the relevant error action and implement that action itself.

An implementation of this method may perform arbitrary lookahead by returning CoderResult.UNDERFLOW until it receives sufficient input.

Parameters:

in - The input byte buffer

out - The output character buffer

Returns:

A coder-result object describing the reason for termination

decode

public final CharBuffer decode(ByteBuffer in)
                        throws CharacterCodingException

Convenience method that decodes the remaining content of a single input byte buffer into a newly-allocated character buffer.

This method implements an entire decoding operation; that is, it resets this decoder, then it decodes the bytes in the given byte buffer, and finally it flushes this decoder. This method should therefore not be invoked if a decoding operation is already in progress.

Parameters:

in - The input byte buffer

Returns:

A newly-allocated character buffer containing the result of the decoding operation. The buffer's position will be zero and its limit will follow the last character written.

Throws:

IllegalStateException - If a decoding operation is already in progress

MalformedInputException - If the byte sequence starting at the input buffer's current position is not legal for this charset and the current malformed-input action is CodingErrorAction.REPORT

UnmappableCharacterException - If the byte sequence starting at the input buffer's current position cannot be mapped to an equivalent character sequence and the current unmappable-character action is CodingErrorAction.REPORT

CharacterCodingException - MalformedInputException if the byte sequence starting at the input buffer's current position is not legal for this charset and the current malformed-input action is CodingErrorAction.REPORT; UnmappableCharacterException if the byte sequence starting at the input buffer's current position cannot be mapped to an equivalent character sequence and the current unmappable-character action is CodingErrorAction.REPORT

OutOfMemoryError - If the output character buffer for the requested size of the input byte buffer cannot be allocated

isAutoDetecting

public boolean isAutoDetecting()

Tells whether or not this decoder implements an auto-detecting charset.

The default implementation of this method always returns false; it should be overridden by auto-detecting decoders to return true.

Returns:

true if, and only if, this decoder implements an auto-detecting charset

isCharsetDetected

public boolean isCharsetDetected()

Tells whether or not this decoder has yet detected a charset (optional operation).

If this decoder implements an auto-detecting charset then at a single point during a decoding operation this method may start returning true to indicate that a specific charset has been detected in the input byte sequence. Once this occurs, the detectedCharset method may be invoked to retrieve the detected charset.

That this method returns false does not imply that no bytes have yet been decoded. Some auto-detecting decoders are capable of decoding some, or even all, of an input byte sequence without fixing on a particular charset.

The default implementation of this method always throws an UnsupportedOperationException; it should be overridden by auto-detecting decoders to return true once the input charset has been determined.

Returns:

true if, and only if, this decoder has detected a specific charset

Throws:

UnsupportedOperationException - If this decoder does not implement an auto-detecting charset

detectedCharset

public Charset detectedCharset()

Retrieves the charset that was detected by this decoder (optional operation).

If this decoder implements an auto-detecting charset then this method returns the actual charset once it has been detected. After that point, this method returns the same value for the duration of the current decoding operation. If not enough input bytes have yet been read to determine the actual charset then this method throws an IllegalStateException.

The default implementation of this method always throws an UnsupportedOperationException; it should be overridden by auto-detecting decoders to return the appropriate value.

Returns:

The charset detected by this auto-detecting decoder, or null if the charset has not yet been determined

Throws:

IllegalStateException - If insufficient bytes have been read to determine a charset

UnsupportedOperationException - If this decoder does not implement an auto-detecting charset