Oracle8i Designing and Tuning for Performance Release 2 (8.1.6) A76992-01 |
|
This chapter offers recommendations on how to use cost-based optimizer hints to enhance Oracle performance.
This chapter contains the following sections:
As an application designer, you may know information about your data that the optimizer does not know. For example, you may know that a certain index is more selective for certain queries. Based on this information, you may be able to choose a more efficient execution plan than the optimizer. In such a case, use hints to force the optimizer to use the optimal execution plan.
Hints allow you to make decisions usually made by the optimizer. You can use hints to specify the following:
Hints provide a mechanism to direct the optimizer to choose a certain query execution plan based on the following criteria:
Hints (except for the RULE
hint) invoke the cost-based optimizer (CBO). If you have not gathered statistics, then defaults are used.
Hints apply only to the optimization of the statement block in which they appear. A statement block is any one of the following statements or parts of statements:
SELECT
, UPDATE
, or DELETE
statement.
For example, a compound query consisting of two component queries combined by the UNION
operator has two statement blocks, one for each component query. For this reason, hints in the first component query apply only to its optimization, not to the optimization of the second component query.
You can send hints for a SQL statement to the optimizer by enclosing them in a comment within the statement.
A statement block can have only one comment containing hints. This comment can only follow the SELECT
, UPDATE
, or DELETE
keyword.
The syntax diagrams show the syntax for hints contained in both styles of comments that Oracle supports within a statement block.
or:
where:
If you specify hints incorrectly, then Oracle ignores them, but does not return an error:
DELETE
, SELECT
, or UPDATE
keyword.
Other conditions specific to index type appear later in this chapter.
The optimizer recognizes hints only when using the cost-based approach. If you include a hint (except the RULE
hint) in a statement block, then the optimizer automatically uses the cost-based approach.
When using hints, in some cases, you may need to specify a full set of hints, so as to ensure the optimal execution plan. For example, if you have a very complex query, which consists of many table joins, and if you specify only the INDEX
hint for a given table, then the optimizer needs to determine the remaining access paths to be used, as well as the corresponding join methods. Therefore, even though you gave the INDEX
hint, the optimizer may not necessarily use that hint, because the optimizer may have determined that the requested index cannot be used due to the join methods and access paths selected by the optimizer. In this particular example, we have specified the exact join order to be used, via the ORDERED
hint, as well as the join methods to be used on the different tables.
SELECT /*+ ORDERED INDEX (b, jl_br_balances_n1) USE_NL (j b) USE_NL (glcc glf) USE_MERGE (gp gsb) */ b.application_id , b.set_of_books_id , b.personnel_id, p.vendor_id Personnel, p.segment1 PersonnelNumber, p.vendor_name Name FROM jl_br_journals j, jl_br_balances b, gl_code_combinations glcc, fnd_flex_values_vl glf, gl_periods gp, gl_sets_of_books gsb, po_vendors p WHERE . . . . . . . . . . . .
By default, hints do not propagate inside a complex view. For example, if you specify a hint in your query that selects against a complex view, then that hint is not honored, because it is not pushed inside the view.
Unless the hints are inside the base view, they may not be honored from a query against the view.
Table hints (i.e., hints that specify a table) normally refer to tables in the DELETE
, SELECT
, or UPDATE
statement in which the hint occurs, not to tables inside any views or subqueries referenced by the statement. When you want to specify hints for tables that appear inside views or subqueries, Oracle recommends using global hints instead of embedding the hint in the view or subquery. Any table hint described in this chapter can be transformed into a global hint by using an extended syntax for the table name.
The hints described in this section allow you to choose between the cost-based and the rule-based optimization approaches. With the cost-based approach, this also includes the goal of best throughput or best response time.
If a SQL statement has a hint specifying an optimization approach and goal, then the optimizer uses the specified approach regardless of the presence or absence of statistics, the value of the OPTIMIZER_MODE
initialization parameter, and the OPTIMIZER_MODE
parameter of the ALTER
SESSION
statement.
The ALL_ROWS
hint explicitly chooses the cost-based approach to optimize a statement block with a goal of best throughput (that is, minimum total resource consumption).
The syntax of this hint is as follows:
For example, the optimizer uses the cost-based approach to optimize this statement for best throughput:
SELECT /*+ ALL_ROWS */ empno, ename, sal, job FROM emp WHERE empno = 7566;
The FIRST_ROWS
hint explicitly chooses the cost-based approach to optimize a statement block with a goal of best response time (minimum resource usage to return first row).
This hint causes the optimizer to make the following choices:
ORDER
BY
clause, then the optimizer may choose it to avoid a sort operation.
The syntax of this hint is as follows:
For example, the optimizer uses the cost-based approach to optimize this statement for best response time:
SELECT /*+ FIRST_ROWS */ empno, ename, sal, job FROM emp WHERE empno = 7566;
The optimizer ignores this hint in DELETE
and UPDATE
statement blocks and in SELECT
statement blocks that contain any of the following syntax:
UNION
, INTERSECT
, MINUS
, UNION
ALL
)
GROUP
BY
clause
FOR
UPDATE
clause
DISTINCT
operator
These statements cannot be optimized for best response time, because Oracle must retrieve all rows accessed by the statement before returning the first row. If you specify this hint in any of these statements, then the optimizer uses the cost-based approach and optimizes for best throughput.
If you specify either the ALL_ROWS
or the FIRST_ROWS
hint in a SQL statement, and if the data dictionary does not have statistics about tables accessed by the statement, then the optimizer uses default statistical values (such as allocated storage for such tables) to estimate the missing statistics and, subsequently, to choose an execution plan.
These estimates may not be as accurate as those gathered by the DBMS_STATS
package. Therefore, use the DBMS_STATS
package to gather statistics. If you specify hints for access paths or join operations along with either the ALL_ROWS
or FIRST_ROWS
hint, then the optimizer gives precedence to the access paths and join operations specified by the hints.
The CHOOSE
hint causes the optimizer to choose between the rule-based and cost-based approaches for a SQL statement. The optimizer bases its selection on the presence of statistics for the tables accessed by the statement. If the data dictionary has statistics for at least one of these tables, then the optimizer uses the cost-based approach and optimizes with the goal of best throughput. If the data dictionary does not have statistics for these tables, then it uses the rule-based approach.
The syntax of this hint is as follows:
SELECT /*+ CHOOSE */ empno, ename, sal, job FROM emp WHERE empno = 7566;
The RULE
hint explicitly chooses rule-based optimization for a statement block. It also makes the optimizer ignore other hints specified for the statement block. The syntax of this hint is as follows:
The optimizer uses the rule-based approach for this statement:
SELECT --+ RULE empno, ename, sal, job FROM emp WHERE empno = 7566;
The RULE
hint, along with the rule-based approach, may not be supported in future releases of Oracle.
Each hint described in this section suggests an access method for a table.
Specifying one of these hints causes the optimizer to choose the specified access path only if the access path is available based on the existence of an index or cluster and on the syntactic constructs of the SQL statement. If a hint specifies an unavailable access path, then the optimizer ignores it.
You must specify the table to be accessed exactly as it appears in the statement. If the statement uses an alias for the table, then use the alias rather than the table name in the hint. The table name within the hint should not include the schema name if the schema name is present in the statement.
Note:
For access path hints, Oracle ignores the hint if you specify the |
The FULL
hint explicitly chooses a full table scan for the specified table. The syntax of this hint is as follows:
where table
specifies the name or alias of the table on which the full table scan is to be performed. If your statement does not use aliases, then the table name is the default alias.
Oracle performs a full table scan on the accounts
table to execute this statement, even if there is an index on the accno
column that is made available by the condition in the WHERE
clause:
SELECT /*+ FULL(A) don't use the index on accno */ accno, bal FROM accounts a WHERE accno = 7086854;
The ROWID
hint explicitly chooses a table scan by rowid for the specified table. The syntax of the ROWID
hint is:
where table
specifies the name or alias of the table on which the table access by rowid is to be performed.
SELECT /*+ROWID(emp)*/ * FROM emp WHERE rowid > 'AAAAtkAABAAAFNTAAA' AND empno = 155;
The CLUSTER
hint explicitly chooses a cluster scan to access the specified table. It applies only to clustered objects. The syntax of the CLUSTER
hint is:
where table
specifies the name or alias of the table to be accessed by a cluster scan.
SELECT --+ CLUSTER emp.ename, deptno FROM emp, dept WHERE deptno = 10AND emp.deptno = dept.deptno;
The HASH
hint explicitly chooses a hash scan to access the specified table. It applies only to tables stored in a cluster. The syntax of the HASH
hint is:
where table
specifies the name or alias of the table to be accessed by a hash scan.
The INDEX
hint explicitly chooses an index scan for the specified table. You can use the INDEX
hint for domain, B*-tree, and bitmap indexes. However, Oracle recommends using INDEX_COMBINE
rather than INDEX
for bitmap indexes, because it is a more versatile hint.
The syntax of the INDEX
hint is:
where:
table |
Specifies the name or alias of the table associated with the index to be scanned. |
index |
Specifies an index on which an index scan is to be performed. |
This hint may optionally specify one or more indexes:
For example, consider this query that selects the name, height, and weight of all male patients in a hospital:
SELECT name, height, weight FROM patients WHERE sex = 'm';
Assume that there is an index on the SEX
column, and that this column contains the values m
and f
. If there are equal numbers of male and female patients in the hospital, then the query returns a relatively large percentage of the table's rows, and a full table scan is likely to be faster than an index scan. However, if a very small percentage of the hospital's patients are male, then the query returns a relatively small percentage of the table's rows, and an index scan is likely to be faster than a full table scan.
Barring the use of frequency histograms, the number of occurrences of each distinct column value is not available to the optimizer. The cost-based approach assumes that each value has an equal probability of appearing in each row. For a column having only two distinct values, the optimizer assumes each value appears in 50% of the rows, so the cost-based approach is likely to choose a full table scan rather than an index scan.
If you know that the value in the WHERE
clause of your query appears in a very small percentage of the rows, then you can use the INDEX
hint to force the optimizer to choose an index scan. In this statement, the INDEX
hint explicitly chooses an index scan on the sex_index
, the index on the sex
column:
SELECT /*+ INDEX(patients sex_index) use sex_index because there are fewmale patients */ name, height, weightFROM patients WHERE sex = 'm';
The INDEX
hint applies to IN
-list predicates; it forces the optimizer to use the hinted index, if possible, for an IN
-list predicate. Multi-column IN
-lists will not use an index.
The INDEX_ASC
hint explicitly chooses an index scan for the specified table. If the statement uses an index range scan, then Oracle scans the index entries in ascending order of their indexed values. The syntax of the INDEX_ASC
hint is:
Each parameter serves the same purpose as in the INDEX
hint.
Because Oracle's default behavior for a range scan is to scan index entries in ascending order of their indexed values, this hint does not specify anything more than the INDEX
hint. However, you may want to use the INDEX_ASC
hint to specify ascending range scans explicitly, should the default behavior change.
The INDEX_COMBINE
hint explicitly chooses a bitmap access path for the table. If no indexes are given as arguments for the INDEX_COMBINE
hint, then the optimizer uses whatever Boolean combination of bitmap indexes has the best cost estimate for the table. If certain indexes are given as arguments, then the optimizer tries to use some Boolean combination of those particular bitmap indexes. The syntax of INDEX_COMBINE
is:
SELECT /*+INDEX_COMBINE(emp sal_bmi hiredate_bmi)*/ * FROM emp WHERE sal < 50000 AND hiredate < '01-JAN-1990';
The INDEX_JOIN
hint explicitly instructs the optimizer to use an index join as an access path. For the hint to have a positive effect, a sufficiently small number of indexes must exist that contain all the columns required to resolve the query.
where:
table |
Specifies the name or alias of the table associated with the index to be scanned. |
index |
Specifies an index on which an index scan is to be performed. |
SELECT /*+INDEX_JOIN(emp sal_bmi hiredate_bmi)*/ sal, hiredate FROM emp WHERE sal < 50000;
The INDEX_DESC
hint explicitly chooses an index scan for the specified table. If the statement uses an index range scan, then Oracle scans the index entries in descending order of their indexed values. The syntax of the INDEX_DESC
hint is:
Each parameter serves the same purpose as in the INDEX
hint.
This hint causes a fast full index scan to be performed rather than a full table scan. The syntax of INDEX_FFS
is:
SELECT /*+INDEX_FFS(emp emp_empno)*/ empno FROM emp WHERE empno > 200;
The NO_INDEX
hint explicitly disallows a set of indexes for the specified table. The syntax of the NO_INDEX
hint is:
NO_INDEX
hint that specifies a list of all available indexes for the table.
The NO_INDEX
hint applies to function-based, B*-tree, bitmap, cluster, or domain indexes.
If a NO_INDEX
hint and an index hint (INDEX
, INDEX_ASC
, INDEX_DESC
, INDEX_COMBINE
, or INDEX_FFS
) both specify the same indexes, then both the NO_INDEX
hint and the index hint are ignored for the specified indexes and the optimizer considers the specified indexes.
SELECT /*+NO_INDEX(emp emp_empno)*/ empno FROM emp WHERE empno > 200;
The AND_EQUAL
hint explicitly chooses an execution plan that uses an access path that merges the scans on several single-column indexes. The syntax of the AND_EQUAL
hint is:
where:
The USE_CONCAT
hint forces combined OR
conditions in the WHERE
clause of a query to be transformed into a compound query using the UNION
ALL
set operator. Normally, this transformation occurs only if the cost of the query using the concatenations is cheaper than the cost without them.
The USE_CONCAT
hint turns off IN
-list processing and OR
-expands all disjunctions, including IN
-lists. The syntax of this hint is:
SELECT /*+USE_CONCAT*/ * FROM emp WHERE empno > 50 OR sal < 50000;
The NO_EXPAND
hint prevents the cost-based optimizer from considering OR
-expansion for queries having OR
conditions or IN
-lists in the WHERE
clause. Usually, the optimizer considers using OR
expansion and uses this method if it decides the cost is lower than not using it. The syntax of this hint is:
SELECT /*+NO_EXPAND*/ * FROM emp WHERE empno = 50 OR empno = 100;
Use the REWRITE
hint with or without a view list. If you use REWRITE
with a view list and the list contains an eligible materialized view, then Oracle uses that view regardless of its cost. Oracle does not consider views outside of the list. If you do not specify a view list, then Oracle searches for an eligible materialized view and always uses it regardless of its cost.
The syntax of this hint is:
See Also:
For more information on materialized views, see Oracle8i Concepts and Oracle8i Application Developer's Guide - Fundamentals. |
Use the NOREWRITE
hint on any query block of a request. This hint disables query rewrite for the query block, overriding the setting of the parameter QUERY_REWRITE_ENABLED
. The syntax of this hint is:
The hints in this section suggest join orders:
The ORDERED
hint causes Oracle to join tables in the order in which they appear in the FROM
clause. The syntax of this hint is:
For example, this statement joins table TAB1
to table TAB2
and then joins the result to table TAB3
:
SELECT /*+ ORDERED */ tab1.col1, tab2.col2, tab3.col3 FROM tab1, tab2, tab3 WHERE tab1.col1 = tab2.col1AND tab2.col1 = tab3.col1;
If you omit the ORDERED
hint from a SQL statement performing a join, then the optimizer chooses the order in which to join the tables. You may want to use the ORDERED
hint to specify a join order if you know something about the number of rows selected from each table that the optimizer does not. Such information allows you to choose an inner and outer table better than the optimizer could.
The STAR
hint forces a star query plan to be used, if possible. A star plan has the largest table in the query last in the join order and joins it with a nested loops join on a concatenated index. The STAR
hint applies when there are at least three tables, the large table's concatenated index has at least three columns, and there are no conflicting access or join method hints. The optimizer also considers different permutations of the small tables.
The syntax of this hint is:
Usually, if you analyze the tables, then the optimizer selects an efficient star plan. You can also use hints to improve the plan. The most precise method is to order the tables in the FROM
clause in the order of the keys in the index, with the large table last. Then use the following hints:
/*+ ORDERED USE_NL(FACTS) INDEX(facts fact_concat) */
Where facts
is the table and fact_concat
is the index. A more general method is to use the STAR
hint.
Each hint described in this section suggests a join operation for a table.
You must specify a table to be joined exactly as it appears in the statement. If the statement uses an alias for the table, then you must use the alias rather than the table name in the hint. The table name within the hint should not include the schema name, if the schema name is present in the statement.
Use of the USE_NL
and USE_MERGE
hints is recommended with the ORDERED
hint. Oracle uses these hints when the referenced table is forced to be the inner table of a join, and they are ignored if the referenced table is the outer table.
The USE_NL
hint causes Oracle to join each specified table to another row source with a nested loops join using the specified table as the inner table. The syntax of the USE_NL
hint is:
where table
is the name or alias of a table to be used as the inner table of a nested loops join.
For example, consider this statement, which joins the accounts
and customers
tables. Assume that these tables are not stored together in a cluster:
SELECT accounts.balance, customers.last_name, customers.first_name FROM accounts, customers WHERE accounts.custno = customers.custno;
Because the default goal of the cost-based approach is best throughput, the optimizer chooses either a nested loops operation or a sort-merge operation to join these tables, depending on which is likely to return all the rows selected by the query more quickly.
However, you may want to optimize the statement for best response time, or the minimal elapsed time necessary to return the first row selected by the query, rather than best throughput. If so, then you can force the optimizer to choose a nested loops join by using the USE_NL
hint. In this statement, the USE_NL
hint explicitly chooses a nested loops join with the customers
table as the inner table:
SELECT /*+ ORDERED USE_NL(customers) to get first row faster */ accounts.balance, customers.last_name, customers.first_name FROM accounts, customers WHERE accounts.custno = customers.custno;
In many cases, a nested loops join returns the first row faster than a sort-merge join. A nested loops join can return the first row after reading the first selected row from one table and the first matching row from the other and combining them, while a sort-merge join cannot return the first row until after reading and sorting all selected rows of both tables and then combining the first rows of each sorted row source.
The USE_MERGE
hint causes Oracle to join each specified table with another row source with a sort-merge join. The syntax of the USE_MERGE
hint is:
where table
is a table to be joined to the row source resulting from joining the previous tables in the join order using a sort-merge join.
SELECT /*+USE_MERGE(emp dept)*/ * FROM emp, dept WHERE emp.deptno = dept.deptno;
The USE_HASH
hint causes Oracle to join each specified table with another row source with a hash join. The syntax of the USE_HASH
hint is:
where table
is a table to be joined to the row source resulting from joining the previous tables in the join order using a hash join.
SELECT /*+use_hash(emp dept)*/ * FROM emp, dept WHERE emp.deptno = dept.deptno;
The DRIVING_SITE
hint forces query execution to be done at a different site than that selected by Oracle. This hint can be used with either rule-based or cost-based optimization. The syntax of this hint is:
where table
is the name or alias for the table at which site the execution should take place.
SELECT /*+DRIVING_SITE(dept)*/ * FROM emp, dept@rsite WHERE emp.deptno = dept.deptno;
If this query is executed without the hint, then rows from dept
are sent to the local site, and the join is executed there. With the hint, the rows from emp
are sent to the remote site, and the query is executed there, returning the result to the local site.
This hint is useful if you are using distributed query optimization.
The LEADING
hint causes Oracle to use the specified table as the first table in the join order. The syntax of the hint is:
Where table is the name or alias of a table to be used as the first table in the join order.
If you specify two or more LEADING
hints on different tables, then all of them are ignored. If you specify the ORDERED
hint, then it overrides all LEADING
hints.
As illustrated in Figure 7-1, the SQL IN
predicate can be evaluated using a join to intersect two sets. Thus emp
.deptno
can be joined to dept
.deptno
to yield a list of employees in a set of departments.
Alternatively, the SQL NOT
IN
predicate can be evaluated using an anti-join to subtract two sets. Thus emp
.deptno
can be anti-joined to dept
.deptno
to select all employees who are not in a set of departments, and you can get a list of all employees who are not in the Shipping or Receiving departments.
For a specific query, place the MERGE_AJ
or HASH_AJ
hints into the NOT
IN
subquery. MERGE_AJ
uses a sort-merge anti-join and HASH_AJ
uses a hash anti-join.
For example:
SELECT * FROM emp WHERE ename LIKE 'J%'AND deptno IS NOT NULL AND deptno NOT IN (SELECT /*+ HASH_AJ */ deptnoFROM dept WHERE deptno IS NOT NULL AND loc = 'DALLAS');
If you want the anti-join transformation always to occur if the conditions in the previous section are met, then set the ALWAYS_ANTI_JOIN
initialization parameter to MERGE
or HASH
. The transformation to the corresponding anti-join type then takes place whenever possible.
For a specific query, place the HASH_SJ
or MERGE_SJ
hint into the EXISTS
subquery. HASH_SJ
uses a hash semi-join and MERGE_SJ
uses a sort merge semi-join. For example:
SELECT * FROM dept WHERE exists (SELECT /*+HASH_SJ*/ * FROM emp WHERE emp.deptno = dept.deptno AND sal > 200000);
This converts the subquery into a special type of join between t1 and t2 that preserves the semantics of the subquery. That is, even if there is more than one matching row in t2
for a row in t1
, the row in t1
is returned only once.
A subquery is evaluated as a semi-join only with these limitations:
GROUP
BY
, CONNECT
BY
, or ROWNUM
references.
If you want the semi-join transformation always to occur if the conditions in the previous section are met, then set the ALWAYS_SEMI_JOIN
initialization parameter to HASH
or MERGE
. The transformation to the corresponding semi-join type then takes place whenever possible.
The hints described in this section determine how statements are parallelized or not parallelized when using parallel execution.
The PARALLEL
hint lets you specify the desired number of concurrent servers that can be used for a parallel operation. The hint applies to the INSERT
, UPDATE
, and DELETE
portions of a statement as well as to the table scan portion.
If any parallel restrictions are violated, then the hint is ignored. The syntax is:
The PARALLEL
hint must use the table alias if an alias is specified in the query. The hint can then take two values separated by commas after the table name. The first value specifies the degree of parallelism for the given table, the second value specifies how the table is to be split among the instances of a parallel server. Specifying DEFAULT
or no value signifies that the query coordinator should examine the settings of the initialization parameters (described in a later section) to determine the default degree of parallelism.
In the following example, the PARALLEL
hint overrides the degree of parallelism specified in the emp
table definition:
SELECT /*+ FULL(scott_emp) PARALLEL(scott_emp, 5) */ ename FROM scott.emp scott_emp;
In the next example, the PARALLEL
hint overrides the degree of parallelism specified in the emp
table definition and tells the optimizer to use the default degree of parallelism determined by the initialization parameters. This hint also specifies that the table should be split among all of the available instances, with the default degree of parallelism on each instance.
SELECT /*+ FULL(scott_emp) PARALLEL(scott_emp, DEFAULT,DEFAULT) */ ename FROM scott.emp scott_emp;
You can use the NOPARALLEL
hint to override a PARALLEL
specification in the table clause. In general, hints take precedence over table clauses. The syntax of this hint is:
The following example illustrates the NOPARALLEL
hint:
SELECT /*+ NOPARALLEL(scott_emp) */ ename FROM scott.emp scott_emp;
Use the PQ_DISTRIBUTE
hint to improve parallel join operation performance. Do this by specifying how rows of joined tables should be distributed among producer and consumer query servers. Using this hint overrides decisions the optimizer would normally make.
Use the EXPLAIN
PLAN
statement to identify the distribution chosen by the optimizer. The optimizer ignores the distribution hint if both tables are serial.
The syntax of this hint is:
where:
table_name |
Name or alias of a table to be used as the inner table of a join. |
outer_distribution |
The distribution for the outer table. |
inner_distribution |
The distribution for the inner table. |
There are six combinations for table distribution. Only a subset of distribution method combinations for the joined tables is valid, as explained in Table 7-1.
Given two tables, R
and S
, that are joined using a hash-join, the following query contains a hint to use hash distribution:
SELECT <column_list> /*+ORDERED PQ_DISTRIBUTE(s HASH, HASH) USE_HASH (s)*/ FROM r,s WHERE r.c=s.c;
To broadcast the outer table r
, the query should be:
SELECT <column list> /*+ORDERED PQ_DISTRIBUTE(s BROADCAST, NONE) USE_HASH (s) */ FROM r,s WHERE r.c=s.c;
When you use the APPEND
hint for INSERT
, data is simply appended to a table. Existing free space in the blocks currently allocated to the table is not used. The syntax of this hint is:
If INSERT
is parallelized using the PARALLEL
hint or clause, then append mode is used by default. You can use NOAPPEND
to override append mode. The APPEND
hint applies to both serial and parallel insert.
The append operation is performed in LOGGING
or NOLOGGING
mode, depending on whether the [NO
] option is set for the table in question. Use the ALTER
TABLE
... [NO
]LOGGING
statement to set the appropriate value.
Note:
Certain restrictions apply to the |
Use NOAPPEND
to override append mode.
Use the PARALLEL_INDEX
hint to specify the desired number of concurrent servers that can be used to parallelize index range scans for partitioned indexes. The syntax of the PARALLEL_INDEX
hint is:
where:
table |
Specifies the name or alias of the table associated with the index to be scanned. |
index |
Specifies an index on which an index scan is to be performed (optional). |
The hint can take two values separated by commas after the table name. The first value specifies the degree of parallelism for the given table. The second value specifies how the table is to be split among the instances of a parallel server. Specifying DEFAULT
or no value signifies the query coordinator should examine the settings of the initialization parameters (described in a later section) to determine the default degree of parallelism.
SELECT /*+ PARALLEL_INDEX(table1, index1, 3, 2) +/
In this example, there are 3 parallel execution processes to be used on each of 2 instances.
Use the NOPARALLEL_INDEX
hint to override a PARALLEL
attribute setting on an index. In this way you can avoid a parallel index scan operation. The syntax of this hint is:
Several additional hints are included in this section:
The CACHE
hint specifies that the blocks retrieved for this table are placed at the most recently used end of the LRU list in the buffer cache when a full table scan is performed. This option is useful for small lookup tables. The syntax of this hint is:
In the following example, the CACHE
hint overrides the table's default caching specification:
SELECT /*+ FULL (scott_emp) CACHE(scott_emp) */ ename FROM scott.emp scott_emp;
The NOCACHE
hint specifies that the blocks retrieved for this table are placed at the least recently used end of the LRU list in the buffer cache when a full table scan is performed. This is the normal behavior of blocks in the buffer cache. The syntax of this hint is:
SELECT /*+ FULL(scott_emp) NOCACHE(scott_emp) */ ename FROM scott.emp scott_emp;
If a view's query contains a GROUP
BY
clause or DISTINCT
operator in the select list, then the optimizer can merge the view's query into the accessing statement only if complex view merging is enabled. Complex merging can also be used to merge an IN subquery into the accessing statement, if the subquery is uncorrelated.
Complex merging is not cost-based--that is, the accessing query block must include the MERGE
hint. Without this hint, the optimizer uses another approach.
Merge a view on a per-query basis by using the MERGE
hint. The syntax of this hint is:
SELECT /*+MERGE(v)*/ e1.ename, e1.sal, v.avg_sal FROM emp e1, (SELECT deptno, avg(sal) avg_sal FROM emp e2 GROUP BY deptno) v WHERE e1.deptno = v.deptno AND e1.sal > v.avg_sal;
The NO_MERGE
hint causes Oracle not to merge mergeable views. The syntax of the NO_MERGE
hint is:
This hint lets the user have more influence over the way in which the view is accessed.
SELECT /*+NO_MERGE(dallasdept)*/ e1.ename, dallasdept.dname FROM emp e1, (SELECT deptno, dname FROM dept WHERE loc = 'DALLAS') dallasdept WHERE e1.deptno = dallasdept.deptno;
This causes view v
not to be merged.
When the NO_MERGE
hint is used without an argument, it should be placed in the view query block. When NO_MERGE
is used with the view name as an argument, it should be placed in the surrounding query.
Setting the UNNEST_SUBQUERY
session parameter to TRUE
enables subquery unnesting. Subquery unnesting unnests and merges the body of the subquery into the body of the statement that contains it, allowing the optimizer to consider them together when evaluating access paths and joins.
UNNEST_SUBQUERY
first verifies if the statement is valid. If the statement is not valid, then subquery unnesting cannot proceed. The statement must then must pass a heuristic test.
See Also:
For more information on unnesting nested subqueries and the conditions that make a subquery block valid, see the Oracle8i SQL Reference. For more information on the |
The UNNEST
hint checks the subquery block for validity only. If it is valid, then subquery unnesting is enabled without Oracle checking the heuristics.
If you enabled subquery unnesting with the UNNEST_SUBQUERY
parameter, then the NO_UNNEST
hint turns it off for specific subquery blocks.
The following examples show situations where it might not be optimal to enable subquery unnesting.
SELECT * FROM t_4k, t_5k WHERE t_5k.ten = t_4k.thousand AND t_4k.thousand < 10AND t_5k.unique3 < 10 AND t_5k.thousand < ALL (SELECT /*+ NO_UNNEST */ z_4k.thousandFROM z_4k WHERE z_4k.ten < t_4k.hundred);SELECT SUM(l_extendedprice) FROM lineitem, parts WHERE p_partkey = l_partkey and p_brand = 'Brand#23'AND p_container = 'MED BOX' AND l_quantity < (SELECT AVG (l_quantity)FROM lineitem WHERE l_partkey = p_partkey);
Use the PUSH_PRED
hint to force pushing of a join predicate into the view. The syntax of this hint is:
SELECT /*+ PUSH_PRED(v) */ t1.x, v.y FROM t1(SELECT t2.x, t3.y FROM t2, t3 WHERE t2.x = t3.x) vWHERE t1.x = v.x and t1.y = 1;
Use the NO_PUSH_PRED
hint to prevent pushing of a join predicate into the view. The syntax of this hint is:
The PUSH_SUBQ
hint causes non-merged subqueries to be evaluated at the earliest possible place in the execution plan. Normally, subqueries that are not merged are executed as the last step in the execution plan. If the subquery is relatively inexpensive and reduces the number of rows significantly, then it improves performance to evaluate the subquery earlier.
The hint has no effect if the subquery is applied to a remote table or one that is joined using a merge join. The syntax of this hint is:
The STAR_TRANSFORMATION
hint makes the optimizer use the best plan in which the transformation has been used. Without the hint, the optimizer could make a cost-based decision to use the best plan generated without the transformation, instead of the best plan for the transformed query.
Even if the hint is given, there is no guarantee that the transformation will take place. The optimizer only generates the subqueries if it seems reasonable to do so. If no subqueries are generated, then there is no transformed query, and the best plan for the untransformed query is used, regardless of the hint.
The syntax of this hint is:
See Also:
Oracle8i Concepts has a full discussion of star transformation. Also, the Oracle8i Reference describes |
The ORDERED_PREDICATES
hint forces the optimizer to preserve the order of predicate evaluation, except for predicates used as index keys. Use this hint in the WHERE
clause of SELECT
statements.
If you do not use the ORDERED_PREDICATES
hint, then Oracle evaluates all predicates in the order specified by the following rules. Predicates:
WHERE
clause.
WHERE
clause.
WHERE
clause (for example, predicates transitively generated by the optimizer) are evaluated next.
WHERE
clause.
The syntax of this hint is:
Oracle does not encourage you to use hints inside or on views (or subqueries). This is because you can define views in one context and use them in another. However, such hints can result in unexpected plans. In particular, hints inside views or on views are handled differently depending on whether the view is mergeable into the top-level query.
Should you decide, nonetheless, to use hints with views, the following sections describe the behavior in each case.
If you want to specify a hint for a table in a view or subquery, then the global hint syntax is recommended. The following section describes this in detail.
This section describes hint behavior with mergeable views.
Optimization approach and goal hints can occur in a top-level query or inside views.
Access method and join hints on referenced views are ignored unless the view contains a single table (or references another view with a single table). For such single-table views, an access method hint or a join hint on the view applies to the table inside the view.
Access method and join hints can appear in a view definition.
FROM
clause of a SELECT
statement), then all access method and join hints inside the view are preserved when the view is merged with the top-level query.
FROM
clause of the SELECT
statement contains only the view).
PARALLEL
, NOPARALLEL
, PARALLEL_INDEX
and NOPARALLEL_INDEX
hints on views are always recursively applied to all the tables in the referenced view. Parallel execution hints in a top-level query override such hints inside a referenced view.
PARALLEL
, NOPARALLEL
, PARALLEL_INDEX
and NOPARALLEL_INDEX
hints inside views are preserved when the view is merged with the top-level query. Parallel execution hints on the view in a top-level query override such hints inside a referenced view.
With non-mergeable views, optimization approach and goal hints inside the view are ignored: the top-level query decides the optimization mode.
Because non-mergeable views are optimized separately from the top-level query, access method and join hints inside the view are always preserved. For the same reason, access method hints on the view in the top-level query are ignored.
However, join hints on the view in the top-level query are preserved because, in this case, a non-mergeable view is similar to a table.
Table hints (i.e., hints that specify a table) normally refer to tables in the DELETE
, SELECT
, or UPDATE
statement in which the hint occurs, not to tables inside any views or subqueries referenced by the statement. When you want to specify hints for tables that appear inside views or subqueries, you should use global hints instead of embedding the hint in the view or subquery. You can transform any table hint in this chapter into a global hint by using an extended syntax for the table name, as described below.
Consider the following view definitions and SELECT
statement:
CREATE VIEW v1 ASSELECT * FROM emp WHERE empno < 100;CREATE VIEW v2 ASSELECT v1.empno empno, dept.deptno deptno FROM v1, dept WHERE v1.deptno = dept.deptno;SELECT /*+ INDEX(v2.v1.emp emp_empno) FULL(v2.dept) */ *FROM v2 WHERE deptno = 20;
The view V1
retrieves all employees whose employee number is less than 100. The view V2
performs a join between the view V1
and the department table. The SELECT
statement retrieves rows from the view V2
restricting it to the department whose number is 20.
There are two global hints in the SELECT
statement. The first hint specifies an index scan for the employee table referenced in the view V1
, which is referenced in the view V2
. The second hint specifies a full table scan for the department table referenced in the view V2
. Note the dotted syntax for the view tables.
A hint such as:
INDEX(emp emp_empno)
in the SELECT
statement is ignored because the employee table does not appear in the FROM
clause of the SELECT
statement.
The global hint syntax also applies to unmergeable views. Consider the following SELECT
statement:
SELECT /*+ NO_MERGE(v2) INDEX(v2.v1.emp emp_empno) FULL(v2.dept) */ * FROM v2 WHERE deptno = 20;
It causes V2
not to be merged, and specifies access path hints for the employee and department tables. These hints are pushed down into the (nonmerged) view V2
.
If a global hint references a UNION
or UNION
ALL
view, then the hint is applied to the first branch that contains the hinted table. Consider the INDEX
hint in the following SELECT
statement:
SELECT /*+ INDEX(v.emp emp_empno) */ * FROM (SELECT *FROM emp WHERE empno < 50 UNION ALL SELECT * FROM emp WHERE empno > 1000) vWHERE deptno = 20;
The INDEX
hint applies to the employee table in the first branch of the UNION
ALL
view v
, not to the employee table in the second branch.
|
![]() Copyright © 1999 Oracle Corporation. All Rights Reserved. |
|