Oracle Enterprise Manager Messages Manual
Release 9.0.1

Part Number A88758-01

Home

Solution Area

Contents

Index

Go to previous page Go to next page

13
Console Messages

This chapter contains probable causes and recommended actions for messages with the following prefixes:

Messages  See Page 

VTC-1000 to VTC-1127: Generic Console Messages

VTCE-1232 to VTCE-1237: Event Management Messages

VTCV-1343 to VTCV-1344: User Manager Component Messages

VTCX-1337 to VTCX-1350: Job and Event Management Messages

VTCDW-1000 to VTCDW-5999 Messages 

13-1

13-5

13-6

13-6

13-9 

VTC-1000 to VTC-1127: Generic Console Messages

VTC-1000: Error encountered attempting to edit the administrator.

Cause: The administrator no longer exists or the Oracle Management Server is no longer available.

Action: Close and reopen the Management Administrators dialog. If the Oracle Management Server is down, restart it and log back into the server (or another sharing the repository).

VTC-1001: You do not have access privileges for this operation.

Cause: You tried to perform a task for which you have not been granted proper privileges.

Action: To perform this task, you would need to be granted full privileges, be the owner of the operation, or be a Super Administrator.

VTC-1002: Please enter a valid username. Empty usernames and usernames with leading or trailing spaces are not allowed.

Cause: The username is invalid or has not been entered.

Action: Enter a valid username.

VTC-1003: Please enter a valid password. Empty passwords and passwords with leading or trailing spaces are not allowed.

Cause: The password is invalid or has not been entered.

Action: Enter a valid password.

VTC-1004: Failed to confirm password.

Cause: The password in the "confirm password" field is not the same as the password.

Action: Make sure both passwords are the same.

VTC-1005: An administrator with name <name> already exists. Please select a unique name.

Cause: You specified an administrator name that is already being used by another administrator.

Action: Specify a different name for the administrator.

VTC-1006: Error creating administrator

Cause: Exceptions beyond the scope of the console occurred - for example, the Oracle Management Server going down.

Action: Contact Oracle Worldwide Customer Support.

VTC-1007: This administrator is currently logged in to Oracle Enterprise Manager. An active administrator cannot be deleted.

Cause: You tried to remove an administrator who is still logged into the system.

Action: Make sure the administrator to be removed is logged out of the system before attempting the removal.

VTC-1008: Launching of the ticker application failed.

Cause: "Out of band" exceptions occurred while launching the event ticker.

Action: Contact Oracle Worldwide Customer Support.

VTC-1009: You will lose all the changes you have made. Do you wish to continue?

Cause: You have changed the destination of the job or event you are creating. Changing the destination will cause you to lose all changes you have made.

Action: Click OK to start over, or click cancel to retain your previous work.

VTC-1011: Errors were encountered attempting to remove the network service. Review and correct all the problems before attempting to remove the service again

Cause: An error was encountered attempting to remove a database, listener, node, or other discovered service from the Oracle Enterprise Manager Console. A detailed error is attached to this message.

Action: Take corrective action, such as re-attempting the removal of the service.

VTC-1016: Unable to revoke access to job or event subsystem.

Cause: An attempt to revoke access to the job or event subsystem failed.

Action: Examine the failure details and perform the corrective action.

VTC-1017: Access to the event subsystem has been revoked by <name>.

Cause: A superuser has revoked access to the event subsystem for this user. The ability to register events and view them has been revoked.

Action: The administrator that revoked access or other super users can grant access again if it is deemed prudent. Contact one of these users to correct the revocation if required.

VTC-1018: Access to the job subsystem has been revoked by <name>.

Cause: A superuser has revoked access to the job subsystem for this user. The ability to submit jobs and view them has been revoked.

Action: The administrator that revoked access or other superusers can grant access again if it is deemed prudent. Contact one of these users to correct the revocation if required.

VTC-1118: No selection made. Please select an appropriate item before invoking the command.

Cause: A refresh has occurred on the pane, and the selection made earlier has been lost because of refreshed data.

Action: Select the data again.

VTC-1119: Please select an appropriate item before invoking the command.

Cause: The current selection does not correspond to the menu option selected.

Action: Re-select the item and attempt the menu selection again.

VTC-1120: Multiple item selection is not allowed for this command. Please select at most 1 item.

Cause: You tried to apply a command meant only for a single item.

Action: Select only one item before applying this command.

VTC-1123: Group object could not be initialized.

Cause: The console tried to initialize a group to display. Either the Oracle Management Server or the network is down.

Action: Retry the operation or close the group window and open it again.

VTC-1124: Group object could not be deleted.

Cause: You tried to delete a group object that could not be deleted.

Action: You do not have proper privileges to delete the object. Full privileges are required to perform this task. There is also the possibility that the group you are trying to remove does not exists.

VTC-1125: The node cannot be expanded. The database node can be expanded to display the database administrative objects only when the database is up.

Cause: The database on the node is down. Because the node contains only one database, the node cannot be expanded to display database administrative objects.

Action: Make sure the database is up before performing the operation.

VTC-1126: Background image file could not be found.

Cause: While you were creating a group, the .gif file specified in the field box could not be found, or its case is incorrect. (Background image filenames are case sensitive.)

Action: Put all background images in the $ORACLE_HOME/classes/oracle/sysman/resources/images directory and make sure to specify the correct filename.

VTC-1127: This operation cannot be performed because of insufficient privileges.

Cause: You tried to perform an operation without Full privileges, which includes the ability to delete objects.

Action: You must obtain Full privileges to perform this task.

VTCE-1232 to VTCE-1237: Event Management Messages

VTCE-1232: General page: event name is not specified.

Cause: You tried to submit an event without assigning it a name.

Action: Specify a name for the event before submitting it.

VTCE-1233: General page: event needs target list.

Cause: You tried to submit an event without specifying the target destination(s) against which the event will be registered.

Action: Specify one or more target destinations for the event, or save the event to the event library.

VTCE-1234: The requested operation could not be performed because of improper privileges.

Cause: You tried to perform an operation for which you have not been granted the proper privileges.

Action: Make sure you have been granted the proper privileges for the command.

VTCE-1235: An operation by this name is already registered. Another operation with this same name cannot be registered.

Cause: You tried to register an object that has the same name as an existing object. Oracle Enterprise Manager does not allow objects to have the same name.

Action: Give a different name to the object you are registering.

VTCE-1236: The event frequency is less than 60 seconds. Specify frequency >= 60 seconds.

Cause: You tried to create an event with a frequency (the number of times the system tests for the event occurrence) that is less than 60 seconds.

Action: Specify a frequency for the event that is 60 seconds or more.

VTCE-1237: The fixit job associated with this event is not valid anymore. Either the fixit job does not exist, or the target associated with that fixit job has changed. The default is being set to None.

Cause: You tried to edit a library event of which the fixit job is invalid. The fixit job was invalidated either because it was removed (by you or by somebody else) or because the target against which the fixit job has been submitted has undergone a change.

Action: Edit the event by changing the fixit job to something else.

VTCV-1343 to VTCV-1344: User Manager Component Messages

VTCV-1343: Error encountered retrieving administrator information.

Cause: Either the Oracle Management Server is down, or the administrator has been deleted.

Action: Retry the operation.

VTCV-1344: Administrator <name of administrator> not found.

Cause: Either the Oracle Management Server is down, or the administrator has been deleted.

Action: Retry the operation.

VTCX-1337 to VTCX-1350: Job and Event Management Messages

VTCX-1337: A submit operation cannot be performed with an empty destination list and incomplete parameters. Please save to library instead.

Cause: The event you are submitting does not have a specified destination or is missing required parameter specifications.

Action: Check to see that the destination and all required parameters have been specified.

VTCX-1338: The operation is incomplete. Would you like to edit it?

Cause: You tried to submit an incomplete operation from the library

Action: Complete all the required specifications for the job or event and submit.

VTCX-1339: None of the destinations could be found. Please discover a destination before creating a job or event.

Cause: You tried to submit a job or event without a destination.

Action: You must discover at least one node before sending a job or event.

VTCX-1340: Operation failed. Object is unavailable or corrupted.

Cause: While editing or viewing a job or event, the console tried to reconstitute the job tasks or event tests with data that is corrupted.

Action: Check the installation.

VTCX-1341: The Oracle Management Server is unavailable. Please restart the application and retry your operation.

Cause: Either the Oracle Management Server is down, or the connection failed between the Oracle Management Server and the application.

Action: Check the status of the Oracle Management Server and the network.

VTCX-1342: The target type is invalid.

Cause: An invalid target type was specified for the current job/event or test/task.

Action: Because certain jobs/events or tests/tasks can only be submitted against particular target types, you must select the appropriate target type.

VTCX-1346: A submit operation cannot be performed with an empty destination list. Please save to library instead.

Cause: The submit operation you tried to perform is incomplete.

Action: Either provide full details for the submit operation, or save it to the library.

VTCX-1347: A submit operation cannot be performed with incomplete parameters for tasks. Please save to library instead.

Cause: The task(s) you tried to submit is incomplete.

Action: Either provide full details for the task(s), or save it to the library.

VTCX-1348: Out of memory error : Cannot show output in present text area. The output is too large.

Cause: A job caused a large output. Given the memory conditions on the console, the job output could not be loaded into the text area.

Action: None

VTCX-1349: The following tasks will not be available because their descriptors have errors:

Cause: The task descriptor is not written properly and could not be loaded by Oracle Enterprise Manager.

Action: Rewrite the task descriptor properly.

VTCX-1350: An irrecoverable error has occurred while accessing the last item. It is recommended that you cancel this dialog and try the operation again

Cause: The selection of tasks/tests on the job/event parameters page has changed, but there is no current selection.

Action: Close the dialog and re-attempt the operation. If the problem persists, report the problem to Oracle Worldwide Customer Support.

VTCX-1351: The task <name of task> may not have been installed. Cannot proceed with current operation.

Cause: The task could not be found possibly because it was not installed with the Oracle Enterprise Manager install, even though it may have been registered in the Enterprise Manager registry.

Action: Integrate the task with the Enterprise Manager install.

VTCX-1353: Please specify at least one notification condition for each subsystem.

Cause: None of the notification conditions was selected, even though the email/page notify checkbox was selected.

Action: If the notify checkbox was checked, check at least one notification condition.

VTCX-1354: Object not found. Please refresh your view.

Cause: Another user deleted the object from the job/event history before you refreshed your history view.

Action: Refresh your history view using the Refresh History button.

VTCX-1355: Unable to establish a secure communication channel

Cause: The client is not able to establish a secure communication channel to the server.

Action: Retry the operation, making sure the Oracle Management Server is running. If the problem persists, contact Oracle Worldwide Customer Support. You may also want to submit the Oracle Enterprise Manager trace file.

VTCDW-1000 to VTCDW-5999 Messages

VTCDW-1010: Discovery/Refresh wizard is already running.

Cause: You tried to run more than one instance of the Discovery/Refresh wizard.

Action: Close the first instance of the Discovery/Refresh wizard before performing another discovery/refresh operation.

VTCDW-1011: Can't decode port# for <string> address = <string>.

Cause: The address could not be parsed correctly. The port number could not be decoded. This is condition is considered an internal error.

Action: Remove the database from the configured node, re-enter the node configuration information, and report the problem to Oracle Worldwide Customer Support.

VTCDW-1012: Unable to obtain configuration data for node <name of node>.

Cause: The Oracle Management Server returned an error while getting the data. This should never happen and is considered an internal error.

Action: Remove the configured node, enter its information again, and report the problem to Oracle Worldwide Customer Support.

VTCDW-1013: Node <name of node> has been previously discovered and can't be configured.

Cause: The node was previously discovered. This is unusual, but could happen if you skipped refresh on a node, or if a node was discovered by another user after you finished the progress page.

Action: Do not attempt to configure this node.

VTCDW-1015: Node <node name> has no configurations. If it remains unconfigured, it will not be added to the list of manageable nodes.

Cause: You did not enter any databases for this node. Newly configured nodes must have databases configured on them to be shown in the navigator.

Action: If you want this node to be in the list of manageable nodes, add at least one database configuration to it.

VTCDW-1016: The following nodes have no configurations: <node names>. If they remain unconfigured, they will not be added to the list of manageable nodes.

Cause: You did not enter any databases for the listed nodes. Newly configured nodes must have databases configured on them to be shown in the Navigator.

Action: Add at least one database configuration to each node that you want to be added to the list of manageable nodes.

VTCDW-1021: Some configs for node <node name> are incomplete. They must be completed or deleted to proceed.

Cause: Some database configurations for the node were only partially filled in.

Action: Finish the configurations or delete them.

VTCDW-1022: The following nodes have incomplete configurations. They must be completed to proceed.

Cause: The database configuration for some nodes were only partially filled in.

Action: Finish the configurations or delete them.

VTCDW-1035: Import File: <name of file> not found.

Cause: An error occurred while trying to import a file specified by the user.

Action: Check that the file exists, is readable, and is a text file.

VTCDW-1041: The following nodes have manual configurations: <node names>. If an agent is discovered on these nodes, all manual data will be lost, in which case it is unlikely that preferences will be preserved. Are you sure you want to autodiscover these nodes?

Cause: You selected nodes to refresh that are currently manually configured.

Action: You can either refresh these files or not refresh them. See the Oracle Enterprise Manager online Help for more information.

VTCDW-1051: An error occurred communicating with the OMS.

Cause: The Oracle Management Server may be down or not responding.

Action: Disconnect from the Oracle Management Server and try again.

VTCDW-1052: An unknown error occurred.

Cause: The error is unknown, but is most likely a logic error.

Action: Contact Oracle Worldwide Customer Support.

VTCDW-1061: Automatic discovery failed for some nodes. Click Next to retry the discovery or to manually configure nodes that do not have Oracle Intelligent Agents.

Cause: Errors were reported in the progress page.

Action: Click Next for further options, or click Cancel to exit.

VTCDW-1063: Cancelling the discovery while processing a node does not stop automatic discovery for that node. Processing continues until the node is either discovered or fails discover. Only nodes already discovered or refreshed will be displayed in the Console Navigator. Click Yes to Cancel.

Cause: You attempted to cancel the wizard while discovering a node.

Action: Click Yes to end the wizard, No to continue the wizard, or Help to get more information.


Go to previous page Go to next page
Oracle
Copyright © 1996-2001, Oracle Corporation.

All Rights Reserved.

Home

Solution Area

Contents

Index