Using the Oracle Transparent Gateway for DRDA involves connecting to the corresponding gateway system and the remote DRDA database associated with the gateway. It is important to understand how to process and use database links. Database links are discussed in detail in the Oracle Database Reference. Read the database link information in that guide to understand database link processing. Then proceed to read this chapter to understand how to set up a database link to a remote DRDA database.
This chapter contains the following sections:
The database and application administrators of a distributed database system are responsible for managing the database links that define paths to the DRDA database. The tasks are as follows:
To create a database link and define a path to a remote database, use the CREATE
DATABASE LINK
statement. The CONNECT TO
clause specifies the remote user ID and password to use when creating a session in the remote database. The USING
clause points to a tnsnames.ora connect descriptor.
Note:
If you do not specify a user ID and a password in theCONNECT TO
clause, then the Oracle Database user ID and password are used.See Also:
Chapter 14, "Security Considerations"for more information.The following example creates a database link to access information in the DRDA Server database:
CREATE PUBLIC DATABASE LINK dblink CONNECT TO userid IDENTIFIED BY password USING 'tns_name_entry';
where:
dblink
is the complete database link name.
user id
is the user ID used to establish a session in the remote database. This user ID must be a valid DRDA Server user ID. It must be authorized to any table or file on the DRDA Server that is referenced in the SQL commands. The user ID must be lesser than eight characters.
password
is the password used to establish a session in the remote database. This password must be a valid DRDA Server password. The password must be lesser than eight characters.
tns_name_entry
specifies the Oracle Net TNS connect descriptor used to identify the gateway.
Database links are active for the duration of a gateway session. If you want to close a database link during a session, then use the ALTER
session statement.
You can drop a database link with the DROP DATABASE LINK
statement. For example, to drop the public database link named DBLINK,
use the statement:
DROP PUBLIC DATABASE LINK dblink;
Note:
A database link should not be dropped if it is required to resolve an in-doubt distributed transaction. Refer to Oracle Database Administrator's Guide for additional information about dropping database links.See Also:
Oracle Database Administrator's Guide for additional information about dropping database linksThe data dictionary of each database stores the definitions of all the database links in that database. The USER_DB_LINKS
data dictionary view shows the defined database links. The ALL_DB_LINKS
data dictionary views show all accessible (public and private) database links.
You can limit the number of connections from a user process to remote databases with the parameter OPEN_LINKS
. This parameter controls the number of remote connections that any single user process can concurrently use with a single SQL statement. Refer to Oracle Database Reference for additional information about limiting the number of active database links.
To access the gateway, complete the following steps on the Oracle integrating server:
Step 1: Login to the Oracle Integrating Server
Log in to the Oracle Integrating Server to access the gateway
Step 2: Creating a database Link to the DRDA Database
For example, use:
CREATE PUBLIC DATABASE LINK DRDA CONNECT TO ORADRDA IDENTIFIED BY oracle_pw USING 'tns_name_entry'
Step 3: Retrieve data from the DRDA Database
This query fetches the TABLE
file in the library SECURE
, using the name ORACLE as the DRDA Server user profile. The ORACLE
user profile must have the appropriate privileges on the DRDA Server to access the SECURE.TABLE
files:
SELECT * FROM SECURE.TABLE@DRDA
The following is an example of the error messages that are displayed if insufficicent privileges are displayed:
ORA-1031: insufficient privileges TG4DRDA V10.2.0.1.0 grc=0, drc=-777 (83TC,0000), errp=ARIXO, sqlcode=-551, sqlstate=42501, errd=FFFFFF9C,0,0,0,0,0 errmc=USER SELECT SECURE.TABLE
Nothing specific to DRDA or to the gateway controls the access to AS/400 files and file members. However, DB2/400 uses a naming convention that implies that the file member name is the same as the name of the file being addressed. For example, accessing schema.table
implies that table is the file name and also that table is the file member name being accessed.
To access file members with names that differ from the associated file name, you must create a view within the file so that DB2/400 can reference the correct file member.
One method for creating this view involves issuing the console command Create Logical File
(CRTLF
). This action creates a logical association between the file name and the file member name.
See Also:
For additional information, refer to the AS/400 Command documentation or to the DB2/400 SQL reference document.You can provide complete data, location, and network transparency by using the synonym feature of Oracle Database. When a synonym is defined, the user need not know the underlying table or network protocol being used. A synonym can be public, which means it is available to all Oracle users. A synonym can also be defined as private, available only to the user who created it. Refer to Oracle Database Reference for details on the synonym feature.
The following statement creates a system-wide synonym for the EMP
file in the DRDA Server with ownership of ORACLE
:
CREATE PUBLIC SYNONYM EMP FOR ORACLE.EMP@DRDA
The Oracle Transparent gateway technology enables the execution of distributed queries that join Oracle Database and DRDA Servers and any other data store for which Oracle provides a gateway. These complex operations can be completely transparent to the users requesting the data.
The distributed query optimizer (DQO) capability can provide better performance of distributed queries. Statistical data regarding tables from DRDA Server is retrieved and passed to the Oracle Integrating Server. The DQO capability is enabled or disabled by the DRDA_OPTIMIZE_QUERY parameter. Refer to "DRDA_OPTIMIZE_QUERY" for more information.
The following example joins data between an Oracle Database, DB2/OS390, and a DRDA Server:
SELECT o.custname, p.projno, e.ename, sum(e.rate*p.hours) FROM orders@DB2 o, EMP@ORACLE7 e, projects@DRDA p WHERE o.projno = p.projno AND p.empno = e.empno GROUP BY o.custname, p.projno, e.ename
A combination of views and synonyms, using the following SQL statements, keeps the process of distributed queries transparent to the user:
CREATE SYNONYM orders for orders@DB2; CREATE SYNONYM PROJECTS for PROJECTS@DRDA; CREATE VIEW details (custname,projno,ename,spend) AS SELECT o.custname, p.projno, e.ename, sum(e.rate*p.hours) FROM orders o, EMP e, projects p WHERE o.projno = p.projno AND p.empno = e.empno GROUP BY o.custname, p.projno, e.ename
The following SQL statement retrieves information from these three data stores in one command:
SELECT * FROM DETAILS;
The results of this command are:
CUSTNAME PROJNO ENAME SPEND --------- --------- --------- --------- ABC Co. 1 Jones 400 ABC Co. 1 Smith 180 XYZ Inc. 2 Jones 400 XYZ Inc. 2 Smith 180
To fully participate in a two-phase commit transaction, a server must support the PREPARE TRANSACTION
statement. The PREPARE TRANSACTION
statement ensures that all participating databases are prepared to COMMIT
or to ROLLBACK
a specific unit of work.
Oracle Database supports the PREPARE TRANSACTION
statement. Any number of Oracle DatabaseS can participate in a distributed two-phase commit transaction. The PREPARE TRANSACTION
statement is performed automatically when a COMMIT
is issued explicitly by an application or implicitly at the normal end of the application.
The gateway does not support the PREPARE TRANSACTION
statement. This limits the two-phase commit protocol when the gateway participates in a distributed transaction. The gateway becomes the commit focal point site of a distributed transaction. The gateway is configured as commit/confirm, so it is always the commit point site, regardless of the commit point strength setting. The gateway commits the unit of work after verifying that all Oracle Databases in the transaction have successfully committed their work. The gateway must coordinate the distributed transaction, so only one gateway can participate in an two-phase commit transaction.
Two-phase commit transactions are recorded in the ORADRDA.ORACLE2PC
table, which is created during installation. This table is created when the o2pc.sql script is run. The owner of this table also owns the package. Refer to "DRDA Gateway Package Considerations" for more information.
Because the ORACLE2PC
table is used to record the status of a gateway transaction, this table must be in at the database where the DRDA update takes place. Therefore, all updates that take place over the gateway must be local to the IBM database.
Note:
Updates to theORACLE2PC
table cannot be part of an IBM distributed transaction.For additional information about the two-phase commit process, refer to Oracle Database Administrator's Guide.
The read-only option can provide improved performance and security. This improved performance depends on your configuration and parameter selections. A Gateway Initialization Parameter, DRDA_READ_ONLY
, controls whether the gateway is enabled in this mode.
If you enable the read-only option, then only queries (SELECT
statements) are allowed by the gateway. The capabilities that control whether updates are allowed by the gateway are disabled. These capabilities include INSERT
, UPDATE
, DELETE
and stored-procedure support (pass-through SQL and DB2 stored procedures). Statements attempting to modify records on the DRDA Server are rejected.
Oracle recommends that you should not routinely switch between settings of the DRDA_READ_ONLY
parameter. If you need both the update and DRDA_READ_ONLY
functionality, then you should create two separate instances of the gateway with different read-only settings.
Oracle Transparent Gateway for DRDA provides a number of options for replicating Oracle and non-Oracle data throughout the enterprise.
When updates are made to Oracle Database, synchronous copies of Oracle and non-Oracle data can be maintained automatically by using Oracle Database 10g triggers.
Oracle Transparent Gateway for DRDA can use the Oracle snapshot feature to automatically replicate non-Oracle data into Oracle Database. The complete refresh capability of Oracle snapshot can be used to propagate a complete copy or a subset of the non-Oracle data into Oracle Database at user-defined intervals.
The COPY
command enables you to copy data from Oracle Database to a DRDA Server database. The Oracle SQL command INSERT
is not supported. If you use the INSERT
command:
INSERT INTO DRDA_table SELECT * FROM local_table
then the following message is displayed:
ORA-2025: All tables in the SQL statement must be at the remote database
To copy data from your Oracle database to the DRDA Server, use:
COPY FROM username/password@connect_identifier - INSERT destination_table - USING query
For example, to select all rows from the local Oracle EMP
table, insert them into the EMP
table on the DRDA Server, and commit the transaction, use:
COPY FROM scott/tiger@ORACLE - INSERT scott.EMP@DRDA - USING SELECT * FROM EMP
The SQL*Plus COPY
command supports APPEND
, CREATE
, INSERT
, and REPLACE
commands. However, INSERT
is the only command supported when copying to the DRDA Server. For more information about the COPY
command, refer to SQL*Plus User's Guide and Reference.
The CREATE TABLE
command enables you to copy data from a DRDA Server to Oracle Database. To create a table on your Oracle database and to insert rows from a DRDA Server table, use:
CREATE TABLE table_name AS query
The following example creates the table EMP
in your local Oracle Database and inserts the rows from the EMP
table on the DRDA Server:
CREATE TABLE EMP AS SELECT * FROM scott.EMP@DRDA
Alternatively, you can use the SQL*Plus COPY
command to copy data from a DRDA Server to Oracle Database. For more information about the COPY
command, refer to SQL*Plus User's Guide and Reference.
SQL statements issued through the gateway can be changed before reaching the DRDA database. These changes are made to make the format acceptable to the gateway or to make Oracle SQL compatible with DRDA Server SQL. Oracle Integrating Server and the gateway can change the statements depending on the situation.
For various reasons, you might need to assess whether the gateway has altered the statement correctly or whether the statement could be rewritten to improve performance. SQL tracing is a feature that allows you to view the changes made to a SQL statement by the Oracle Integrating Server or the gateway.
SQL tracing reduces gateway performance. Use tracing only while testing and debugging your application. Do not enable SQL tracing when the application is running in a production environment. For more information about enabling SQL tracing, refer to the section on "SQL Tracing and the Gateway" in Chapter 16, "Error Messages, Diagnosis, and Reporting".