3 Job Admin Services

This chapter discusses the Job Admin Services.

Job Admin RESTful Services

Job Admin provides below RESTful services. These services are secured with SSL and basic authentication.

• Batch Service - Ability to start/stop/restart, check status, and so on of jobs. This service is typically used by the BDI Process Flow engine.

• Receiver Service - Ability to stream data from one system to another system. This service is used by the Downloader-Transporter job.

• System Setting Service - Ability to view, change system settings, and credentials. Refer to Appendix D for details on System Setting REST resources.

• Data Service - Ability to get data set information using job information such as job name, execution id or instance id.

• Telemetry Service - Ability to get job metrics for jobs that ran between fromTime and toTime.

Receiver Service

The Receiver Service is a RESTful service that provides various endpoints to send data transactionally. Receiver Service is part of Job Admin. Receiver Service uploads the data to either database or files. By default, the Receiver Service stores the data in the database. It stores data as files and keeps track of metadata in the database. The Receiver Service also supports various merge strategies for merging files at the end. The Receiver Service is used by the Downloader-Transporter job to transmit data from source to destination.Seed data for Receiver Service is generated during design time and loaded during deployment of the Job Admin application.

BDI_RECEIVER_OPTIONS

The Receiver Service options can be configured at interface level.

Table 3-1 Receiver Options

Column	Type	Comments
ID	NUMBER	Primary key
INTERFACE_MODULE	VARCHAR2(255)	Name of the interface module
INTERFACE_SHORT_NAME	VARCHAR2(255)	Name of the interface
BASE_FOLDER	VARCHAR2(255)	This is the base folder for storing files created by Receiver Service. Receiver Service creates a subfolder ”bdi-data” under base folder. Base folder can be changed from ”Manage Configurations” tab of Job Admin GUI.
FOLDER_TEMPLATE	VARCHAR2(255)	Folder template provides the folder structure for storing files created by Receiver Service.Default value is ”${basefolder}/${TxId}/${TId}/${BId}/”. TxId - Transaction IdTId - Transmission IdBId - Block IdThis value can't be changed.
MERGE_STRATEGY	VARCHAR2(255)	The strategy for merging files. The default value is ”NO_MERGE”. The valid values are NO_MERGE, MERGE_TO_PARTITION_LEVEL, and MERGE_TO_INTERFACE_LEVEL.MERGE_TO_PARTITION_LEVELMerges all files for that partition and creates the merged file in ”${TId}” folder.MERGE_TO_INTERFACE_LEVELMerges all files for interface and creates the merged file in ”${TxId}” folder.MERGE strategies are only supported in cases where the Uploader is not used.

Endpoints

Ping

This endpoint can be used to check whether the Receiver Service is up or not.

HTTP Method: GET

Path: receiver/ping

Response: alive

Begin Receiver Transaction

This is the first endpoint to be called by the client (for example Downloader-Transporter job) before sending any data. It stores the following metadata in the BDI_RECEIVER_TRANSACTION table and returns the response in JSON format.

Parameter	Description
Transaction Id	Transaction Id (Tx#<Job Instance Id>_<Current Time in millis>_<Source System Name> of the Downloader-Transporter job
Interface Module	Name of the interface module (for example Diff_Fnd)
Source System Name	Name of the source system (for example RMS)
sourceSystemId	ID of the source system (for example URL)
sourceDataSetId	ID of the data set
Data Set Type	Type of data set (FULL or PARTIAL)
Source System Data Set Ready Time	Time when source data set was ready in the outbound tables

HTTP Method: POST

Path: receiver/beginTransaction/{transactionId}/{interfaceModule}/{sourceSystemName}/{sourceSystemId}/{sourceDataSetId}/{dataSetType}/{sourceSystemDataSetReadyTime}

Sample Response
 
{
        ”receiverTransactionId”: ”1”,
        ”transactionId”: ”Tx#1”,
        ”sourceSystemName”: ”RMS”,
        ”interfaceModule”: ”Diff_Fnd”,
        ”sourceSystemId”: ””,
        ”sourceDataSetId”: ””,
        ”dataSetType”: ”FULL”,
        ”sourceSystemDataSetReadyTime”: ””,
        ”dir”: ””,
        ”fileName”: ””,
        ”receiverTransactionStatus”: ””,
        ”receiverTransactionBeginTime”: ””,
        ”receiverTransactionEndTime”: ””    
}

Begin Receiver Transmission

This end point needs to be called by client (for example Downloader-Transporter job) before sending any data for a partition. It stores the following metadata in BDI_RECEIVER_TRANSMISSION table and returns response in JSON format.

Parameter	Description
TransmissionId	Generated for each partition
InterfaceModule)	Name of the interface module (for example Diff_Fnd
InterfaceShortName)	Name of the interface (for example Diff
partitionName	Partition number
partitionBeginSeqNum	Begin sequence number in the partition
partitionEndSeqNum	End sequence number in the partition
beginBlockNumber	Begin block number

HTTP Method: POST

Path: receiver/beginTransmission/{transactionId}/{transmissionId}/{sourceSystemName}/{interfaceMod-ule}/{interfaceShortName}/{partitionName}/{partitionBeginSeqNum}/{partitionEndSeqNum}/{beginBlockNumber}

Parameters:

Query Parameter: sourceSystemInterfaceDataCount

Sample Response:
 
{
        ”transmissionId”: ”1”,
        ”interfaceModule”: ”Diff_Fnd”,
        ”interfaceShortName”: ”Diff”,
        ”sourceSystemPartitionName”: ”1”,
        ”sourceSystemPartitionBeginSequenceNumber”: ”1”,
        ”sourceSystemPartitionEndSequenceNumber”: ”100”,
        ”beginBlockNumber”: ”1”,
        ”endBlockNumber”: ””,
        ”dir”: ””,
        ”fileName”: ””,
        ”receiverTransmissionStatus”: ””
}

Upload Data Block

Clients use this endpoint to send data. This endpoint is typically called by the client multiple times until there is no more data. It creates a csv file with the data it received at the below location.

${BASE_FOLDER}/bdi-data/${TxId}/${TId}/${BId}

BASE_FOLDER - Obtained from the BDI_RECEIVER_OPTIONS table

TxId - Transaction Id of the remote Downloader-Transporter job

TId - Transmission Id associated with the transaction id

BId - Block Id associated with transmission id

It also stores the following metadata in the RECEIVER_TRANSMISSION_BLOCK table.

Parameter	Description
BlockNumber	Number of the block
ItemCountInBlock	Number of items in the block
Dir	Directory where file is created
FileName	Name of the file
ReceiverBlockStatus	Status of the block
CreateTime	Time when the block is created

HTTP Method: POST

Path: receiver/uploadDataBlock/{transactionId}/{transmissionId}/{sourceSystemName}/{interfaceModule}/{interfaceShortName}/{blockNumber}/{itemCountInBlock}

Sample Response
 
{
        ”blockId”: ”1”,
        ”transmissionId”: ”1”,
        ”blockNumber”: ”1”,
        ”blockItemCount”: ”100”,
        ”dir”: ””,
        ”fileName”: ””,
        ”receiverBlockStatus”: ””,
        ”createTime”: ””
}

End Transmission

This end point ends transmission for a partition. It updates ”endBlockNumber” and ”receiverTransmisionStatus” in the RECEIVER_TRANSMISSION table.

HTTP Method: POST

Path: receiver/endTransmission/{transmissionId}/{sourceSystemName}/{interfaceModule}/{interfaceShortName}/{numBlocks}

Sample Response
 
{
        ”transmissionId”: ”1”,
        ”interfaceModule”: ”Diff_Fnd”,
        ”interfaceShortName”: ”Diff”,
        ”sourceSystemPartitionName”: ”1”,
        ”sourceSystemPartitionBeginSequenceNumber”: ”1”,
        ”sourceSystemPartitionEndSequenceNumber”: ”100”,
        ”beginBlockNumber”: ”1”,
        ”endBlockNumber”: ””,
        ”dir”: ””,
        ”fileName”: ””,
        ”receiverTransmissionStatus”: ””
}

End Transaction

This end point ends the transaction and called once by the client. It updates ”receiverTransactionStatus” and ”receiverTranasctionEndTime” in the RECEIVER_TRANSACTION table. If ”mergeStrategy” is set to ”MERGE_TO_PARTITION_LEVEL” or ”MERGE_TO_INTERFACE_LEVEL”, then it merges the files and creates the merged file(s) at the appropriate directory. It creates an entry in the BDI_UPLDER_IFACE_MOD_DATA_CTL table so that Uploader job can pick up the data.

HTTP Method: POST

Path: receiver/endTransaction/{transactionId}/{sourceSystemName}/{interfaceModule}

Sample Response
 
{
        ”receiverTransactionId”: ”1”,
        ”transactionId”: ”Tx#1”,
        ”sourceSystemName”: ”RMS”,
        ”interfaceModule”: ”Diff_Fnd”,
        ”sourceSystemId”: ””,
        ”dataSetType”: ”FULL”,
        ”sourceSystemDataSetReadyTime”: ””,
        ”dir”: ””,
        ”fileName”: ””,
        ”receiverTransactionStatus”: ””,
        ”receiverTransactionBeginTime”: ””,
        ”receiverTransactionEndTime”: ””    
}

Uploader Interface Module Data Control Table

The BDI_UPLDER_IFACE_MOD_DATA_CTL table acts as a handshake between the downloader and uploader jobs. When the downloader-transporter job calls endTransaction on Receiver Service, the Receiver Service creates an entry in this table if it successfully received data and created files.

An entry in this table indicates to the uploader job that a data set is ready to be uploaded.

BDI_UPLDER_IFACE_MOD_DATA_CTL

Table 3-2 Module Data Control

Column	Type	Comments
UPLOADER_IFACE_MOD_DATA_CTLID	NUMBER	Primary key
INTERFACE_MODULE	VARCHAR2(255)	Name of the interface module
REMOTE_TRANSACTION_ID	VARCHAR2(255)	Transaction Id of Downloader-Transporter job
SOURCE_DATA_SET_ID	NUMBER	NUMBER ID of the source data set
SRC_SYS_DATA_SET_READY_TIME	TIMESTAMP	Source Data Set Ready Time
DATA_SET_TYPE	VARCHAR2(255)	Type of data set (FULL or PARTIAL)
DATA_SET_READY_TIME	TIMESTAMP	Time when data set was available in the outbound tables
DATA_FILE_MERGE_LEVEL	VARCHAR2(255)	Merge level for the files (NO_MERGE, MERGE_TO_PARTITION_LEVEL, MERGE_TO_INTERFACE_LEVEL)
SOURCE_SYSTEM_NAME	VARCHAR2(255)	Name of the source system (for example RMS)

Receiver Side Split for Multiple Destinations

If there are multiple destinations that receive data from a source, one of the options is to use the Receiver Service at one destination to receive data from the sender and then multiple destinations use the data from one Receiver Service to upload to inbound tables. The requirements for the Receiver Side Split are such that:

• The Receiver Service database schema is shared by all the destinations

• The File system is shared by all destinations

The performance of BDI can be improved by using the receiver side split if there are multiple destinations.

Batch Service

Batch service is a RESTful service that provides various endpoints to manage batch jobs in the bulk data integration system. Batch Service is part of Job Admin.

Table 3-3 Batch Service

REST Resource	HTTP Method	Description
/batch/jobs	GET	Gets all available batch jobs
/batch/jobs/enable-disable	POST	Enable or disable the jobs
/batch/jobs/{jobName}	GET	Gets all instances for a job
/batch/jobs/{jobName}/executions	GET	Gets all executions for a job
/batch/jobs/executions	GET	Gets all executions
/batch/jobs/currently-running-jobs	GET	Gets currently running jobs
/batch/jobs/{jobName}/{jobInstanceId}/executions	GET	Gets job executions for a job instance
/batch/jobs/{jobName}/{jobExecutionId}	GET	Gets job instance and execution for a job execution id
/batch/jobs/{jobName}	POST	Starts a job asynchronously
/batch/jobs/executions/{jobExecutionId}	POST	Restarts a stopped or failed job
/batch/jobs/executions	DELETE	Stops all running job executions
/batch/jobs/executions/{jobExecutionId}	DELETE	Stops a job execution
/batch/jobs/executions/{jobExecutionId}	GET	Gets execution steps with details
/batch/jobs/executions/{jobExecutionId}/steps	GET	Gets execution steps
/batch/jobs/executions/{jobExecutionId}/steps/{stepExecutionId}	GET	Gets step details
/batch/jobs/is-job-ready-to-start/{jobName}	GET	Gets job if ready to start
/batch/jobs/group-definitions	GET	Gets all group definitions
/batch/jobs/job-def-xml-files	GET	Gets all job xml files

Key End Points

Start Job

This end point starts a job asynchronously based on a job name and returns the execution id of the job in the response. If the given job is disabled it throws the exception "Cannot start the disabled Job {jobName}. Enable the Job and start it."

Path: /batch/jobs/{jobName}

HTTP Method: POST

Inputs

Job Name as path parameter

Job Parameters as a query parameter. Job Parameters is a comma separated list of name value pairs. This parameter is optional.

Sample Request

http://localhost:7001/bdi-batch-job-admin/resources/batch/jobs/DiffGrp_Fnd_ImporterJob?jobParameters=dataSetId=1

Successful Response

XML
 
<executionIdVo targetNamespace=””>
<executionId>1</executionId>
        <jobName>DiffGrp_Fnd_ImporterJob</jobName>
</executionIdVo>
 
JSON
 
{
”executionId”: 1,
        ”jobName”: ”DiffGrp_Fnd_ImporterJob”
}

Error Response

XML
<exceptionVo targetNamespace=””>
        <statusCode>404</statusCode>
        <status>NOT_FOUND</status>
        <message>HTTP 404 Not Found</message>
        <stackTrace></stackTrace>  <!-- optional -->
</exceptionVo>
 
JSON
{
        ”statusCode”: ”404”,
        ”status”: ”NOT_FOUND”,
        ”message”: ”HTTP 404 Not Found”,
        ”stackTrace”: ””
}

Error Response in case of disable jobs

JSON
{
        "statusCode": 500, 
        "status": "Internal Server Error",
        "message": "Cannot start the disabled Job {jobName}. Enable the Job 
     and start it.", 
        "stackTrace": "java.lang.RuntimeException:....."
}

Restart Job

This end point restarts a job asynchronously using the job execution id and returns the new job execution id. If the given job is disabled it throws the exception "Cannot restart the disabled Job {jobName}. Enable the Job and restart."

Path: /batch/jobs/executions/{executionId}

HTTP Method: POST

Inputs

executionId as path parameter

Sample Request

http://localhost:7001/bdi-batch-job-admin/resources/batch/jobs/executions/2

Successful Response

XML
 
<executionIdVo targetNamespace=””>
<executionId>2</executionId>
<jobName>DiffGrp_Fnd_ImporterJob</jobName>
</executionIdVo>
 
JSON
 
{
        ”executionId”: 2,
        ”jobName”: ”DiffGrp_Fnd_ImporterJob”
}

Error Response

XML
XML
 
<exceptionVo targetNamespace=””>
<statusCode>500</statusCode>
<status>INTERNAL_SERVER_ERROR</status>
        <message>Internal Server Error</message>
<stackTrace></stackTrace>  <!-- optional -->
</exceptionVo>
 
JSON
 
{
        ”statusCode”: ”500”,
        ”Status”: ”INTERNAL_SERVER_ERROR”,
        ”Message”: ”Internal Server Error”,
        ”stackTrace”: ””
}

Error Response in case of disable jobs

JSON
{
        "statusCode": 500, 
        "status": "Internal Server Error",
        "message": "Cannot restart the disabled Job {jobName}. Enable the 
                Job and restart.", 
        "stackTrace": "java.lang.RuntimeException:....."
}

Enable or Disable the jobs

This endpoint enables or disables the jobs using jobId, jobEnableStatus and returns the jobId, status and message.

Path: /batch/jobs/enable-disable

HTTP Method: POST

Inputs

JSON
[
      {
      "jobId": "Diff_Fnd_DownloaderAndTransporterToRxmJob",
      "jobEnableStatus": "false"
   },
      {
      "jobId": "CodeHead_Fnd_DownloaderAndTransporterToSimJob",
      "jobEnableStatus": "true"
   }
]

Sample Request

http://localhost:7001/bdi-batch-job-admin/resources/batch/jobs/enable-disable

Successful Response

JSON
[
      {
      "jobId": "DiffGrp_Fnd_DownloaderAndTransporterToSimJob",
      "jobEnableStatus": "DISABLED",
      "message": "Job Disabled Successfully"
   },
  {
      "jobId": "CodeHead_Fnd_DownloaderAndTransporterToSimJob",
      "jobEnableStatus": "ENABLED",
      "message": "Job Enabled Successfully"
   }
]

Check Status of a Job

This endpoint returns the status of a job using the job name and execution id.

Path: /batch/jobs/jobName/{jobExecutionId}

HTTP Method: GET

Inputs

jobName as path parameter

jobExecutionId as path parameter

Sample Request

http://localhost:7001/bdi-batch-job-admin/resources/batch/jobs/DiffGrp_Fnd_ImporterJob/1

Successful Response

XML
<jobInstanceExecutionsVo targetNamespace=””>
    <jobName>DiffGrp_Fnd_ImporterJob</jobName>
    <jobInstanceId>1</jobInstanceId>
<resource>http://localhost:7001/bdi-batch-job-admin/resources/batch/jobs/DiffGrp_Fnd_ImporterJob/1</resource>
    <jobInstanceExecutionVo>
        <executionId>1<>executionId>
        <executionStatus>COMPLETED</executionStatus>
        <executionStartTime>2016-07-11 15:45:27.356</executionStartTime>
        <executionDuration>10</executionDuration>
    </jobInstanceExecutionVo>
</jobInstanceExecutionsVo>

JSON

{
    ”jobName”: ”DiffGrp_Fnd_ImporterJob”,
    ”jobInstanceId”: 1,
    ”resource”: ”http://localhost:7001/bdi-batch-job-admin/resources/batch/jobs/DiffGrp_Fnd_ImporterJob/1”,
    [”jobInstanceExecutionVo”: {
            ”executionId”: 1,
            ”executionStatus”: ”COMPLETED”,
            ”executionStartTime”:”2016-07-11 15:45:27.356”,
            ”executionDuration”: ”10”
    }]
  }    
}

Error Response

XML

<exceptionVo targetNamespace=””>
<statusCode>500</statusCode>
<status>INTERNAL_SERVER_ERROR</status>
        <message>Internal Server Error</message>
<stackTrace></stackTrace>  <!-- optional -->
</exceptionVo>
 
JSON
 
{
        ”statusCode”: ”500”,
        ”Status”: ”INTERNAL_SERVER_ERROR”,
        ”Message”: ”Internal Server Error”,
        ”stackTrace”: ””
}

Data Service

Data Service is a RESTful service that provides end points to get data set information based on job level information.

Table 3-4 Data Service

REST Resource	HTTP Method	Description
/data/dataset/{jobName}/executions/{jobExecutionId}	GET	Gets a data set based on job name and job execution id
/data/dataset/{jobName}/instances/{jobInstanceId}	GET	Gets a data set based on job name and job instance id
/data/dataset/{jobName}nextPending	GET	Gets next pending data set based on job name

Get Data Set for job name and execution id

Job name - Extractor or downloader-transmitter or uploader job name

Execution id - Job execution id

This endpoint is used by a process flow to get the data set id after the extractor job is run successfully.

Sample Request

http://localhost:7001/bdi-batch-job-admin/resources/data/dataset/Diff_Fnd_ExtractorJob/executions/1

Sample Response

Returns response in either XML or JSON format.

<jobDataSetVo>
  <interfaceModule>Diff_Fnd</interfaceModule>
  <interfaceModuleDataControlId>2</interfaceModuleDataControlId>
  <jobName>Diff_Fnd_ExtractorJob</jobName>
  <jobDataSetInstance>
     <jobInstanceId>1</jobInstanceId>
     <jobDataSetExecutions>
         <jobExecutionId>1</jobExecutionId>
     </jobDataSetExecutions>
  </jobDataSetInstance>
</jobDataSetVo>

Get Data Set for job name and instance id

Job name - Extractor or downloader-transmitter or uploader job

Instance id - Job instance id

Sample Request

http://localhost:7001/bdi-batch-job-admin/resources/data/dataset/Diff_Fnd_ExtractorJob/instances/1

Sample Response

<jobDataSetVo>
  <interfaceModule>Diff_Fnd</interfaceModule>
  <interfaceModuleDataControlId>2</interfaceModuleDataControlId>
  <jobName>Diff_Fnd_ExtractorJob</jobName>
  <jobDataSetInstance>
     <jobInstanceId>1</jobInstanceId>
     <jobDataSetExecutions>
         <jobExecutionId>1</jobExecutionId>
     </jobDataSetExecutions>
  </jobDataSetInstance>
</jobDataSetVo>

Get next pending data set for job name

This endpoint is applicable only to the downloader-transporter or uploader jobs.

Sample Request

http://localhost:7001/bdi-batch-job-admin/resources/data/dataset/Diff_Fnd_DownloaderAndTransporterToRpasJob/nextPending

Sample Response

<jobDataSetVo>
    <interfaceModule>Diff_Fnd</interfaceModule>
    <interfaceModuleDataControlId>9</interfaceModuleDataControlId>
</jobDataSetVo>

Telemetry Service

Telemetry Service is a RESTful service that provides end points to get job metrics information.

Table 3-5 Data Service

REST Resource	HTTP Method	Description
/telemetry/jobs/	GET	Gets job metrics based on fromTime and toTime
/telemetry/jobs/summary	GET	Gets job metrics summary based on fromTime and toTime

Job telemetry provides an end point to produce metrics for jobs that ran between "fromTime" and "toTime".

Path: /telemetry/jobs HTTP Method: GET Parameters:

fromTime - Query parameter

toTime - Query parameter

Sample Request

http://localhost:7001/<app>-batch-job-admin/resources/telemetry/jobs?fromTime= &toTime=

Sample Response

 Returns response in either XML or JSON format.
 
<job-runtime-monitoring-info data-requested-at="2018-11-08T00:44:57.113-05:00" data-requested-from-time="2018-11-07T00:44:57.1-05:00" data-requested-to-time="2018-11-08T00:44:57.1-05:00">
<jobs-server-runtime-info id="external-batch-job-admin.war" app-status="RUNNING" up-since="69461" total-jobs-count="2" total-executions-count="2" successful-executions-count="0" failed-executions-count="2">
<job name="Calendar_Fnd_ImporterJob" slowest-run-duration="0" fastest-run-duration="0" avg-run-duration="0.0">
<executions execution_count="1" success_count="0" failure_count="1">
<execution execution-id="42" instance_id="42" status="FAILED" startTime="2018-11-08T00:44:22-05:00" endTime="2018-11-08T00:44:22-05:00">
<step step-execution-id="42" name="batchlet-step" duration="0" status="FAILED"/>
</execution>
</executions>
</job>
</jobs-server-runtime-info>
</job-runtime-monitoring-info>

Job telemetry summary provides an end point to produce metrics for jobs summary information that ran between "fromTime" and "toTime".

Path: /telemetry/jobs/summaryHTTP Method: GET Parameters:

fromTime - Query parameter

toTime - Query parameter

Sample Request

http:// localhost:7001/ <app>-batch-job-admin/resources/telemetry/jobs/summary?fromTime= &toTime=

Sample Response

   Returns response in either XML or JSON format.
 
<jobExecutionsSummaryVo data-requested-at="2018-11-08T00:45:50.888-05:00" data-requested-from-time="2018-11-07T00:45:50.887-05:00" data-requested-to-time="2018-11-08T00:45:50.887-05:00">
<executions jobName="Calendar_Fnd_ImporterJob" executionId="42" instanceId="42" status="FAILED" startTime="2018-11-08T00:44:22-05:00" endTime="2018-11-08T00:44:22-05:00"averageDuration="0.0"/>
<executions jobName="Brand_Fnd_ImporterJob" executionId="41" instanceId="41" status="FAILED" startTime="2018-11-08T00:43:59-05:00" endTime="2018-11-08T00:44:02-05:00" averageDuration="0.0"/>
</jobExecutionsSummaryVo>

End Points for CRUD operations on Job XML

End points have been added to Batch Service to allow CRUD operations on Job XML.

CREATE Job XML

This end point creates an entry in BDI_JOB_DEFINITION table. It will throw an exception if job already exists.

HTTP Method: PUT

Path: /resources/batch/jobs/job-def-xml/{jobName}

Inputs:

Job Name (e.g. Diff_Fnd_ExtractorJob)

Job XML - It has to be valid XML that conforms to Job XML schema. The value of "id" in the XML should match "jobName" path parameter.

Update Job XML

This end point updates an entry in BDI_JOB_DEFINITION table. It will update if job is not in running state. This end point throws an exception if job doesn't exist in the table.

HTTP Method: POST

Path: /resources/batch/jobs/job-def-xml/{jobName}

Inputs:

Job Name (e.g. Diff_Fnd_ExtractorJob)

Job XML - It has to be valid XML that conforms to Job XML schema. The value of "id" in the XML should match "jobName" path parameter.

Delete Job XML

This end point deletes an entry in BDI_JOB_DEFINITION table. It will delete if job is not in running state and if there is no history in batch database.

HTTP Method: DELETE

Path: /resources/batch/jobs/job-def-xml/{jobName}

Inputs:

Job Name (e.g. Diff_Fnd_ExtractorJob)

Delete Job History

This end point deletes history for a job from batch database. It will delete history if job is not in running state.

HTTP Method: DELETE

Path: /resources/batch/jobs/{jobName}

Inputs:

Job Name (e.g. Diff_Fnd_ExtractorJob)

Bulk API for Batch Job CRUD Operations

ReST Endpoints have been introduced for Bulk create/update and Delete of Jobs in BDI/JOS Job admin application. There were existing end points to create/update/delete the individual jobs but it would be a great effort to use them sequentially for high number of jobs. A single end point service which can be used to take care of bulk create OR update operation for new job set has been added. Another end point for deleting multiple jobs has been added. Both the end points provide Job Level success and failure response for Create/Update/Delete.

End point for create/update job definitions

Http method:

Post

Path:

/batch/jobs/bulk/job-definitions

Consumes:

MediaType.APPLICATION_JSON/MediaType.APPLICATION_XML

Sample request:

http://localhost:7001/bdi-batch-job-admin/resources/batch/jobs/bulk/job-definitions

Input:

JSON

{"jobDefinitionsVo":[
{    "jobId": "Job11",  
 "jobDefXml": "PGpvYi-BpZD0iSm9iMTEiIHZlcnNpb249IjEuMCIgeG1sbnM9Imh0dHA6Ly94bWxucy5qY3Aub3JnL3htbC9ucy9qYXZhZWUiPgogIAgHyb3BlcnRpZXM==" },
{"jobId": "Job12",  
 "jobDefXml": "PGpvYi-BpZD0iSm9iMTIiIHZlcnNpb249IjEuMCIgeG1sbnM9Imh0dHA6Ly94bWxucy5qY3Aub3JnL3htbC9ucy9qYXZhZWUiPgoJPHByb3BlcnRpZXM+ " } ]
}

Successful Response:

If the result is complete success from endpoint then provide the list of jobDefinitionVo(List<JobDefinitionVo>) for customer reference.

JSON

{
     "jobDefinitionsVo": [
                {"jobId": "Job1",
                 "createTime": "create_timestamp",
                 "updateTime": "update_timestamp",
                 "status": "Success"
                },
                {"jobId": "Job2",
                 "createTime": "create_timestamp",
                 "updateTime": "update_timestamp",
                 "status": "Success"
                }
    ]
}

Error Response:

There would be individual calls for each job xml, if any job fails we can still process the next job and can show the list at the end for failed and success jobs.

Possible issues could be:

• Cannot update job XML if that job is running.

• Cannot create/update the Job if job id was not found in input job xml.

• Cannot create/update the Job if input job xml is not readable/parsable.

JSON

{
   "jobDefinitionsVo" [
                {"jobId": "Job1",
                "createTime": "create_timestamp",
                "updateTime": "update_timestamp"
                "status": "Success"
                },
               {"jobId": "Job2",
                "status": "Failure"
                "message": "Currently job is running"
                },
               {"jobId": "Job3",
                "status": "Failure"
                "message": "Job id not found in job xml"
                }
      ]
}

Exception Response

End point returns exception response if it is unable to process the request.

{
        "statusCode": 500
         "status": "Internal Server Error"
          "message": "Unable to process"
          "stackTrace": ""
}

End point for delete job definitions

Http method:

Delete

Path:

/batch/jobs/bulk/job-definitions

Consumes:

MediaType.APPLICATION_JSON/MediaType.APPLICATION_XML

Sample request:

http://localhost:7001/bdi-batch-job-admin/resources/batch/jobs/bulk/job-definitions

Input:

JSON

{
 "jobDefinitionsVo":  [
{"jobId":"Job1"},
{"jobId":"Job2"}
  ]
}

Successful Response:

If the result is complete success from endpoint then provide the list of jobDefinition-Vo(List<JobDefinitionVo>) for customer reference.

JSON

{
    "jobDefinitionsVo":  [
                    {"jobId": "Job1",
                     "deleteTime": "delete_timestamp",
                     "status": "Success"
                    },
                    {"jobID": "Job2",
                     "deleteTime": "delete_timestamp",
                     "status": "Success"
                    },
   ]
}

Error Response:

There would be individual calls for each job xml, if any job fails to delete we can still process the next job and can show the list at the end for failed and success jobs.

Possible issues could be:

• Can't delete job if that job is running.

• Can't delete the Job if job id was not found in existing job list.

• Can't delete the Job if job is in enabled status.

• Can't delete the Job if input job list is not readable/parsable.

JSON

{
     "jobDefinitionsVo":  [
                    {"jobID": "Job1",
                     "deleteTime": "delete_timestamp",
                     "status": "Success"
                    },
                    {"JobId": "Job2",
                     "status": "Failure",
                     "message": "Currently job is running"
                    },
                    {"jobID": "Job3",
                     "status": "Failure",
                     "message": "Cant delete job XML as job job3 is not valid. "
                    } 
       ]
}

Exception Response

End point returns exception response if it's unable to process the main request.

JSON

{
        "statusCode": 500
        "status": "Internal Server Error"
        "message": "Unable to process"
        "stackTrace": ""
}

Configuration of Job Admin

During the deployment of Job Admin, seed data gets loaded to various tables. Seed data files are located in the bdi-<app>-home/setup-data/dml folder. If seed data is changed, Job Admin need to be reinstalled and redeployed. For loading seed data again during the redeployment, LOADSEEDDATA flag in the BDI_SYSTEM_OPTIONS table need to be set to TRUE.

Jobs

The following job properties can be changed to improve the performance of the jobs.

Item-count - Number of items read by a job before it writes. Default size is 1000.

fetchSize - Number of items cached by JBDC driver. Default size is 1000.

Receiver Service

The Receiver Service allows maximum number of blocks for transaction based on the following system option in BDI_SYSTEM_OPTIONS table.

receiverMaxNumBlocks - Default value is set to 10000

Seed data need to be changed to update the maximum number of blocks for the Receiver Service. To update the seed data, set the LOADSEEDDATA flag to TRUE, reinstall and redeploy Job Admin. The Value of the LOADSEEDDATA flag can be changed from the Job Admin Manage Configurations Tab.

Job Admin Customization

During the deployment of Job Admin, seed data is loaded to various tables. Seed data files are located in the bdi-edge-<app>-job-home/setup-data/dml folder. If seed data is changed, Job Admin must be reinstalled and redeployed. In order to load seed data again during the redeployment, the LOADSEEDDATA flag in the BDI_SYSTEM_ OPTIONS table must be set to TRUE.

During the deployment, Job XMLs get loaded to BDI_JOB_DEFINITION table. Job XML files are located in the "jos-job-home/setup-data/META-INF/batch-jobs" folder. If job xmls are changed, Job Admin must be reinstalled and redeployed. In order to load job xmls during redeployment, the LOADJOBDEF flag in the BDI_SYSTEM_OPTIONS table must be set to TRUE.

Note: Restart of job does not load job definition from the BDI_JOB_DEFINITION table. Java Batch loads job xml from JOBSTATUS table during the restart of a job. If there is an issue with Job XML, job needs to be started after fixing the job XML.

Throttling

Throttling is the capability of regulating the rate of input for a system where output rate is slower than input.

Java Batch runtime will not allow to run multiple instances of a job at same time, it will say job is currently running and fail the job. There can be only one instance of a job at any time (unless the job parameters are different).

Throttling is introduced to address the issue caused when there are many job start requests at the same time. In order to honor the throttle limits "throttleSystemLimit" is introduced to make sure the system never runs more than the throttle limit for the group and the system.

Three new tables are added to job schema to handle throttling, these are BDI_GROUP, BDI_GROUP_LOCK, BDI_GROUP_MEMBER.

Table 3-6 BDI Group

Column	Type	Comments
GROUP_ID	NUMBER	Primary Key
APP_TAG	VARCHAR2(255)	Name of the application
COMMENTS	VARCHAR2(255)	Comments
GROUP_ATTRIB_NAME_1	VARCHAR2(255)	Name of the group attribute ex - THROTTLE_JOBS_IN_SAME_GROUP
GROUP_ATTRIB_NAME_2	VARCHAR2(255)	Name of the group attribute
GROUP_ATTRIB_NAME_3	VARCHAR2(255)	Name of the group attribute
GROUP_ATTRIB_NAME_4	VARCHAR2(255)	Name of the group attribute
GROUP_ATTRIB_NAME_5	VARCHAR2(255)	Name of the group attribute
GROUP_ATTRIB_VAL_1	VARCHAR2(255)	Value of the group attribute
GROUP_ATTRIB_VAL_2	VARCHAR2(255)	Value of the group attribute
GROUP_ATTRIB_VAL_3	VARCHAR2(255)	Value of the group attribute
GROUP_ATTRIB_VAL_4	VARCHAR2(255)	Value of the group attribute
GROUP_ATTRIB_VAL_5	VARCHAR2(255)	Value of the group attribute
GROUP_NAME	VARCHAR2(255)	Name of the group

Table 3-7 BDI Group Member

Column	Type	Comments
GROUP_MEMBER_ID	NUMBER	Primary Key
APP_TAG	VARCHAR2(255)	Name of the application
GROUP_ID	NUMBER	Group id
MEMBER_NAME	VARCHAR2(255)	Name of the job
MEMBER_TYPE	VARCHAR2(255)	Type of the member ex - job

Table 3-8 BDI Group Lock

Column	Type	Comments
LOCK_ID	NUMBER	Primary Key
APP_TAG	VARCHAR2(255)	Name of the application
GROUP_NAME	VARCHAR2(255)	Name of the group

Prerequisite: In weblogic console, make sure the job admin data source has "Supports Global Transactions" and "Logging Last Resource" checked in the Transaction tab.

Example on how throttling is handled at runtime:Group1 <--(job1, job2, job3)-Throttle value 3 Group2 <-- (job1, job2) - Throttle value2

Step1:

Start job1, job2, job3 from process1, process2, process3 respectively. All 3 start running.

Step2:

Then start again process1 and process2. Both job1 and job2 get throttled.

There can be only one instance of a job at any time (unless the job parameters are different).

BDI Global Migration Script (BDI_Database_Util_Spec)

To make a re-runnable sql script which globally works for all sqls that makes a sql script re-runnable, there should be a script which creates package with functions/procedures that returns a necessary result value to the calling function to check whether anything exists in the schema before proceeding to execute the query on the schema. Below are the list of functions/procedures used in the package.

Table 3-9 BDI Global Migration Script Function/Procedure Names and Descriptions

Function/Procedure Name	Description
checkTableExists	It checks whether table exists or not in the schema.
checkColumnExists	It checks whether column of a table exists or not in the schema.
checkConstraintExists	It checks whether constraint of table exists or not in the schema.
checkIndexExists	It checks whether index exists for a table or not in the schema.
createTable	It creates table only after checking whether table exists or not in the schema.
AddColumnToTable	It adds column only after checking whether table and column exists or not in the schema.
modifyColumnType	It modifies column datatype/any other related to column changes like making column not null or primary key.
updateColumnName	It updates column name of the table.
AddTableConstraint	It adds constraint to table only after checking whether table and constraint exists or not in the schema.
createIndex	It checks whether index exists or not on table in the schema before index is created.
createSequence	It checks whether sequence exists or not on table in the schema before sequence is created.

Note: Before running the global migration script you need to provide three permissions to package. Permissions are: CREATE ANY TABLE TO 'user_schema', CREATE ANY SEQUENCE TO 'user-schema' CREATE ANY INDEX To 'user_schema'

DB Schema Auto Migration

Schema migration is to make changes to database like alter column, adding new table on running the migration script. Previously, migration scripts are run manually one by one on sqlplus or sqldeveloper to migrate from one to another version. Now, with the db schema auto migration feature with no user intervention in running the migration scripts, it automatically migrates from currently deployed app version to app version which will be deployed to web logic. For example, the current deployed app version in web logic is 16.0.028 and app which will be deployed to web logic is going to be 19.0.000, So db schema auto migration finds scripts between the versions (inclusive of 16.0.028 and 19.0.000), sorts and runs the migration scripts one by one from 16.0.028 to 19.0.000. This feature can be used on passing the -run-db-schema-migration parameter to bdi-app-admin-deployer.sh script with {-setup-credentials| -use-existing-credentials}.

Note: DB Schema auto migration feature should be used from >=16.0.028 version of BDI apps.

Example to run DB Schema auto migration:

sh bdi-app-admin-deployer.sh { -setup-credentials | -use-existing-credentials } -run-db-schema-migration (Optional parameter)