7 System Control Parameters

This chapter describes the system control parameters.

List of System Control Parameters

The following table lists the different System Control Parameters.

Note: SCP VALUE under the SCP TYPE column indicates that there are a distinct set of values available for the SCP.

Table 7-1 List of System Control Parameters

SCP NBR.	SCP_NAME	DESCRIPTION	SCP TYPE	SCP MIN VALUE	SCP MAX VALUE	AREA
1	3rd_party_routing	When set to Y, an FTP interface sent to a third party routing package is used.	SCP VALUE			SHIPPING
2	DC_dest_ID	Destination ID of the DC. Must be in the Ship Dest table. Used in reports (for DC return address) and to show what containers are stock (dest_ID=DC).	DEST ID			ADMIN - SETUP
3	FNC1_ASCII	Designates the end of string character that is used to determine the last character of variable length fields in EAN 128 bar codes used during receiving.	STRING			ADMIN - SETUP, RECEIVING
4	LTC	Unit Pick System Code associated to the RF Unit Picking (Stationary SKU) (LTC and ltc code refer to the same operation of Less Than Case picking).	UNIT PICK			DISTRIBUTION
5	MM_Cycle_Count_Priv	User Privilege to execute Cycle Count on Manually Marked (MM) Location.	NUMBER	1	9	INVENTORY MANAGEMENT, CYCLE COUNT
6	PPS	Unit Pick System Code associated to a Paperless Picking System (PPS and pps code refer to the same paperless picking system).	UNIT PICK			DISTRIBUTION - PPS
7	PPS_flag	Indicates whether PPS is turned on. Used in the distribution and picking processes.	SCP VALUE			DISTRIBUTION - PPS
8	able_to_ship_level	Security level to enable the F9 ship key in the shipping form.	NUMBER	1	9	SHIPPING
9	ac_cycle_count_priv	Sets the privilege level to allow RF users to perform Audit Counts.If your privilege level is equal to or greater than this SCP you can perform Audit Counts.	NUMBER	0	9	INVENTORY MANAGEMENT, CYCLE COUNT
10	adjust_pick	Enables the F7 adjust key on the RF picking windows.	SCP VALUE			DISTRIBUTION
11	ahl_log	Log Activity History Log 0: No AHL Logging, 1: AHL Logging through SQL insert.	SCP VALUE			ADMIN - SETUP
12	allow_predist_create	Determines if RWMS can create Pre-distribution allocations. When set to Y, RWMS allows the creation of PREDIST stock orders in the Create Stock Order window under the Distribution Planning Module.	SCP VALUE			DISTRIBUTION
13	allow_trble_putaway	When set to Y, RWMS allows putaway to storage with associated trouble codes.	SCP VALUE			PUTAWAY
14	app_cls_commit_each	Determines if a commit is to be performed after applying/unapplying each item or location class.	SCP VALUE			ADMIN - SETUP
15	apply_qa_wip	Determines if a QA WIP needs to be applied.	SCP VALUE			WIP CODES
16	appointment_window	The number of days (past and future) to allow appointments to be active. Used in the Schedule Appointment window and purge_ appointments_b.sh.	NUMBER	1	999	ADMIN - SETUP, RECEIVING
17	apprv_indirect_activity_priv	Specifies the privilege threshold below which the GUI Indirect Activities screen works in USER mode. If priv of logged in user is greater than or equal to scp value then the screen will show up in Manager Mode.	NUMBER	1	9	ADMIN - SETUP, TASK MANAGEMENT
18	appt_asset_default	Sets the default value for receiving appointments for the capture of asset tracking. Specifies how you are prompted to enter assets during receiving. During: you are prompted for asset quantities after each item is received that is associated with asset tracking. End: enter at end before closing appointment. Start: user prompted to enter assets at beginning of appointment.	SCP VALUE			ADMIN - SETUP, RECEIVING
19	appt_bulk_def	Sets bulk flag default on the Appointment Detail window.	SCP VALUE			RECEIVING
20	appt_update_allowed	For Brazil, this SCP must always be set to N. When set to N, RWMS does not allow you to add or delete line items but allows you to modify or add different casepacks as long as the total unit quantity per line item equals the original downloaded quantities. When set to Y, normal appointment detail modifications are allowed.	SCP VALUE			RECEIVING
21	asset_tracking	For transport asset tracking. When enabled, RWMS supports tracking of transport asset inventory and enables the messaging from RWMS to communicate asset movements to the host. When Asset tracking is set to Y, RWMS tracks transport assets.	SCP VALUE			ADMIN - SETUP, RECEIVING
22	assortment_wip_code	WIP code applied when inbound container has an assortment item. Parent Item with child SKUs.	WIP CODE			WIP CODES
23	ats_calc_incl_dist	When set to Y, distributed inventory is kept in the Available to Sell bucket in the output generated by inv_disposition_upload.sh script.	SCP VALUE			INVENTORY MANAGEMENT
24	auto_induct	When set to Y, groups assigned to the first pack wave have the Active Pick flag set to Y, indicating that this pack wave is staged in the UPS for picking. If put_to_order is enabled, allocation data is sent to the UPS for only those allocations deemed active within the UPS. If put to destination is enabled, all allocations are downloaded at one time.	SCP VALUE			DISTRIBUTION
25	autopack	Assigned name to the autopack sorter.	STRING			DISTRIBUTION
26	back_order_flag	Indicates whether to retain stock orders when the inventory is exhausted. Used in the distribution process.	SCP VALUE			DISTRIBUTION
27	best_before_wip	Used to automatically apply a WIP code to a container requiring a best before date (perishable indicator set in Item Master).	WIP CODE			WIP CODES, RECEIVING
28	bld_mix_dest_sku_pal	When set to Y, building of mixed destination pallets (Distributed) is allowed.	SCP VALUE			DISTRIBUTION
29	blind_bulk_receiving	When set to Y, RWMS generated Receiving labels do not print any container quantities or unit quantities on bulk container labels. It also does not pre-populate the carton quantity on the RF receiving window when receiving bulk pallets. When set to N, the carton and unit quantity appears on the labels and RF.	SCP VALUE			RECEIVING
30	break_by_wip_con	When set to Y, the distribution process creates separate Master Pick Labels for each group of WIP codes for conveyable cartons.	SCP VALUE			DISTRIBUTION
31	break_by_wip_non_con	When set to Y, the distribution process creates separate Master Pick Labels for each group of WIP codes for non-conveyable cartons.	SCP VALUE			DISTRIBUTION
32	carton_store_putwy	Default putway plan used for cases having an item with no putaway plan defined on the item master.	PUTAWAY			PUTAWAY
33	case_pts_security	Defines minimum user security level that can process a inventory adjustment without supervisor approval. Applies only to Case PTS.	NUMBER	1	9	INVENTORY MANAGEMENT
34	cd_back_order_flag	For Consumer direct picks it indicates whether to retain stock orders when the inventory is exhausted. Used in the distribution process.	SCP VALUE			DISTRIBUTION, CONSUMER DIRECT
35	cd_bulk_pick_dropoff	The bulk picking dropoff location for consumer direct picks.	LOCATION			LOC or LOC TYPE, PICKING, CONSUMER DIRECT
36	cd_case_pick_dropoff	The case picking dropoff location for consumer direct picks.	LOCATION			LOC or LOC TYPE, PICKING, CONSUMER DIRECT
37	cd_consolidate_dropoff	Location where the containers eligible for order consolidation can be staged before being moved to consolidation locations for each distro.	LOCATION			LOC or LOC TYPE, CONSUMER DIRECT
38	cd_consolidate_flag	Used in the stock_order table for consumer direct orders for virtual stores. If the stock order consume has the field consolidate as null, the default value will be populated from SCP into the stock order record.	SCP VALUE			ADMIN - SETUP, DISTRIBUTION, CONSUMER DIRECT
39	cd_consolidate_processing_loc	Location where the order consolidation is performed. Containers location is auto-updated to this location when scanned on the Order Consolidation screen.	LOCATION			LOC or LOC TYPE, CONSUMER DIRECT
40	cd_fcp_pick_dropoff	The fcp picking dropoff location for consumer direct picks.	LOCATION			LOC or LOC TYPE, CONSUMER DIRECT
41	cd_labeled_picking	For consumer direct,when set to Y, RWMS generates a picking label packet and a report. When set to N, RWMS assumes labeless picking and only generates a report.	SCP VALUE			DISTRIBUTION, PICKING, CONSUMER DIRECT
42	cd_labeled_tote	For consumer direct,if set to Y, labels for Unit picks prints even when labeled_picking = N.	SCP VALUE			DISTRIBUTION, PICKING, CONSUMER DIRECT
43	cd_pick_by_loc_flag_con	For consumer direct,when set to Y, RWMS is picking by location and allows mixing of conveyable cartons of varying destinations onto a single pallet during Container Picking. When set to N, RWMS is picking by destination and does not allow mixing of conveyable cartons of varying destinations onto a single pallet during Container Picking.	SCP VALUE			DISTRIBUTION, PICKING, CONSUMER DIRECT
44	cd_pick_by_loc_flag_non	For consumer direct,when set to Y, RWMS is picking by location and allows mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking. When set to N, RWMS is picking by destination and does not allow mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking.	SCP VALUE			DISTRIBUTION, PICKING, CONSUMER DIRECT
45	cd_unit_pick_dropoff	The unit picking dropoff location for consumer direct picks.	LOCATION			LOC or LOC TYPE, CONSUMER DIRECT
46	cd_xzone_case_picking	For consumer direct case picking,when set to Y, the distribution process creates pick across multiple zones for the same distribution. When set to N, cross-zone picking, for the same distribution, is denied.	SCP VALUE			DISTRIBUTION, PICKING, CONSUMER DIRECT
47	cd_xzone_unit_picking	For consumer direct unit picking,when set to Y, the distribution process creates pick across multiple zones for the same distribution. When set to N, cross-zone picking, for the same distribution, is denied.	SCP VALUE			DISTRIBUTION, PICKING, CONSUMER DIRECT
48	clear_user	When set to Y, clears the user name from the C pick allowing another user to proceed with operation. When set to N, the user name is still associated with the pick and that individual must finish the operation.	SCP VALUE			INVENTORY MANAGEMENT, PICKING, TASK MANAGEMENT
49	cltp_prg_delay	The amount of time, in seconds, to retain the Container Label to Print file before clearing it.	NUMBER	1	600	PRINTER - LABELS
50	company_nbr	Company number to send to PPS.	NUMBER	0	9	ADMIN - SETUP
51	consolidate_pend_wip	When set to Y, RWMS allows the consolidation of WIP codes, when building pallets.	SCP VALUE			WIP CODES
52	container_format	Indicates that the container identifier number is compliant with UCC128 or is generic with embedded destination ID (DEFAULT).	SCP VALUE			PRINTER - LABELS
53	cs_rsv_loc_type	User Defined location type for case reserve.	LOC TYPE			LOC OR LOC TYPE
54	cs_rsv_priority	Priority used in distribution to pull merchandise from case.	NUMBER	1	3	DISTRIBUTION - PLANNING
55	cubiscan	Set to Y when using a TCP/IP connection to a Cubiscan device.	SCP VALUE			RECEIVING
56	cycle_count_period	Number of days to cycle count the entire DC. Used in schedule_cycle_count_b.sh.	NUMBER	1	365	INVENTORY MANAGEMENT, CYCLE COUNT
57	cycle_count_type	Defines how the DC wants to count inventory, either by item, location or zone. Used when schedule cycle count runs in cron (System Scheduled Cycle Count).	SCP VALUE			INVENTORY MANAGEMENT, CYCLE COUNT
58	debug_flag	Used in determining the data value inserted into the Error Log error message field during exception handling.	SCP VALUE			TECHNICAL
59	def_appt_type	Allows you to specify the most frequently used receiving type in the Create Appointment Header window reducing selection time. Valid Values: 0 = Blank, 1 = FPR with Details,, 2 = FPR without Details, 3 = PO, , 4 = ASN, 5 = NSC, 6=ASN/NSC.	SCP VALUE			ADMIN - SETUP, RECEIVING
60	def_cc_min_tol_qty	Only used when the CC MIN TOLERANCE QTY is not defined on the Item Master. Allows you to set a cycle count minimum unit tolerance quantity at the global level to determine whether an inventory adjustment is allowed immediately or an Audit Count must be performed. If the difference between the system count and cycle count exceeded the cycle count tolerance percent, then RWMS checks to see if the difference between the system count and cycle count is equal to or less than the minimum tolerance unit quantity. If the difference is equal to or less than the minimum unit quantity then RWMS immediately posts an inventory adjustment. If the difference exceeds the minimum unit quantity then RWMS marks that location for an Audit Count and does not make an inventory adjustment until the Audit Count is completed.	NUMBER	0	9999	INVENTORY MANAGEMENT, CYCLE COUNT
61	def_cc_tolerance_pct	Only used when the CC TOLERANCE PCT is not set on the Item Master. It allows you to set a cycle count tolerance percentage at the global level to determine whether an inventory adjustment is allowed immediately or an Audit Count must be performed. If the difference between the original system quantity and the cycle count quantity is within the tolerance percentage, it allows the inventory adjustment immediately. If the difference exceeds the tolerance percentage then check the def_cc_min_tol_qty.	NUMBER	0	999	INVENTORY MANAGEMENT, CYCLE COUNT
62	def_random_putaway	Default putaway plan for random replenishment.	PUTAWAY			PUTAWAY
63	def_rollback_alloc	Sets the rollback allocation flag on the stock order header for RWMS generated stock orders.	SCP VALUE			DISTRIBUTION
64	def_sa_priority	Sets the priority of the stock allocation detail records if the host management system does not download a priority or the value is NULL.	NUMBER	0	9	DISTRIBUTION
65	def_ship_label_size	Default label size to be printed from the RF Print Ship Label screen. The label size field is modifiable by the user (toggle).	SCP VALUE			PRINTER - LABELS, SHIPPING
66	def_so_priority	Sets the priority of the stock order header records if the host management system does not download a priority or the value is NULL.	NUMBER	0	9	DISTRIBUTION
67	def_task_priority	This SCP specifies the default PRIORITY of a task for an activity, when a priority value is not defined for an activty.	NUMBER	1	99	ADMIN - SETUP, TASK MANAGEMENT
68	def_task_priority_threshold	This SCP specifies the default PRIORITY THRESHOLD of a task for an activity, when a priority threshold value is not defined for an activty. The threshold value specifies when proximity takes precedence over priority.	NUMBER	1	99	ADMIN - SETUP, TASK MANAGEMENT
69	def_work_day_end	Default working day end. Used in Working Days Editor.	TIME			ADMIN - SETUP
70	def_work_day_start	Default working day start. Used in Working Days Editor.	TIME			ADMIN - SETUP
71	default_carton_group	Carton group used in cartonization if none is defined for the item.	CARTON GROUP			ADMIN - SETUP
72	default_cc_plan	Default cycle count plan to be set during item master download if none is specified.	CC PLAN			INVENTORY MANAGEMENT, CYCLE COUNT
73	default_dc_cont_type	Default container type used for a pallet in FCP (Forward Case Picking).	CONT TYPE			PUTAWAY
74	default_dist_type	Distribution Type for the Select Stock Order screen. The field is modifiable to the user.	SCP VALUE			DISTRIBUTION
75	default_kitting_wip	WIP code when creating an item that is defined as a kit.	WIP CODE			WIP CODES
76	default_language	Used to display the labels in the RF Login screen. This is also used to print the labels in Label Reports.	LANGUAGE			ADMIN - SETUP
77	default_order_level	Type of saved query for order selection. FULL: Every line in query has to match. ORDER: If any line matches, RWMS shows all distribution lines. LINE: Only distributions that match display.	SCP VALUE			DISTRIBUTION - PLANNING
78	default_order_type	Determines how downloaded stock orders are processed. WAVE uses the pre-defined Shipping Schedule and proceeds without intervention. AUTOMATIC does not require destinations to have a pre-defined Shipping Schedule, but does proceed without intervention. MANUAL allows intervention by selecting orders to be included in a wave. PO: allocation of merchandise is tied to a specific PO. PREDIST: allocations that have pre-distributed merchandise.	SCP VALUE			DISTRIBUTION - PLANNING
79	default_putaway	Default putaway plan to be set during item master download if none is specified.	PUTAWAY			PUTAWAY
80	default_trailer_cube	Default size of a trailer. Used in the Schedule Appointment window when a new trailer is scheduled. Used to calculate and display the percentage filled of a trailer on the Shipping Status.	NUMBER	100	1E+07	SHIPPING
81	default_ups	Default Unit Pick System code for Item Master download.	UNIT PICK			ITEM SETUP
82	delete_pfl	When set to Y, and unit quantity in the from location is 0, RWMS deletes the location record once the merchandise moves out. User override is provided on the FPL Move window.	SCP VALUE			ACTIVE - RANDOM, INVENTORY MANAGEMENT
83	deposit_item_detail	For transport asset tracking. When deposit_ item_detail is set to Y, RWMS itemizes the deposit assets based on predefined relationships in all inventory messages (receipts, inventory adjustment, return to vendor, shipments, inventory balance). When set to N, RWMS does not communicate the deposit assets with the content item in inventory messages. When set to N, it is assumed that the host system can calculate the deposit assets.	SCP VALUE			ADMIN - SETUP
84	dflt_labeled_rcving	Defaults the labeled flag on the appointment header record. When set to Y, RWMS creates formatted labels. When set to N, RWMS expects you to provide generic labels. This flag is editable on the appointment header.	SCP VALUE			ADMIN - SETUP, RECEIVING
85	display_item_id	Used in the multi-item UPC functionality. If set to Y, item information, which matches the UPC code, displays when the item_id is scanned. When set to N, only the UPC code displays in the field.	SCP VALUE			ADMIN - SETUP
86	display_standard	When this parameter is set to Y, the user can invoke RF Labor Standard Review screen to review the performance against system calculated labor standard. When this parameter is set N, the user will not be allowed to invoke the RF Labor Standard Review screen.	SCP VALUE			LABOR MANAGEMENT
87	distrib_unfin_wip	When set to Y, RWMS allows allocation of merchandise from a pallet that has unfinished WIP codes associated with it.	SCP VALUE			DISTRIBUTION, WIP CODES
88	distribute_partial	When set to Y, RWMS processes partial distribution of a dye lot. The maximum amount of a single dye lot is distributed even if only a partial fulfillment of the order. If N, the distribution is skipped.	SCP VALUE			DISTRIBUTION
89	drop_off_convey	Suggested drop-off location for pallet and case picking for conveyable merchandise.	LOCATION			LOC OR LOC TYPE
90	dynamic_random_slot	Determine whether distribution should create a random slot for active picking when needed.	SCP VALUE			ACTIVE - RANDOM
91	enable_kitting	When set to Y, the Distribution process builds Kit Build directives for Master Items that have a Stock Allocation but no Inventory to satisify the order.	SCP VALUE			PROCESS, DISTRIBUTION
92	enable_labor_mgmt	When this parameter is set to Y, RWMS will calculate labor standards for any activity that has a defined Labor Code and Labor Management Enabled is set to Y. When this parameter is set to N, RWMS will never calculate labor standards even when an activity has a defined Labor Code and Labor Management Enabled is set to Y or N.	SCP VALUE			LABOR MANAGEMENT
93	entry_limit	Maximum adjustment quantity on a unit basis per user.	NUMBER	1	9999	ADMIN - SETUP, INVENTORY MANAGEMENT
94	exceed_capacity	Allows chutes to be overfilled during the waving process.	SCP VALUE			DISTRIBUTION - PLANNING
95	exception_cont_type	Default container type used during cartonization if no defined container types hold items.	CONT TYPE			ADMIN - SETUP
96	exceptions_stage	Area specified in building (location) where exception packages are sent for consolidation. Used in an automated sorter environment/configuration.	LOCATION			LOC OR LOC TYPE
97	fcp_random_act_stg	Staging location for replenishments to random forward case locations.	LOCATION			LOC OR LOC TYPE
98	fcp_random_dest_id	Destination ID for replenishments to random forward case locations.	DEST ID			ADMIN - SETUP, INTERNAL DEST ID
99	first_time_sku	WIP code applied to first time SKU containers during receiving.	WIP CODE			WIP CODES, RECEIVING
100	fixed_replen_wave	When set to Y, RWMS groups all replenishment picks into Wave 1. When set to N, RWMS associates replenishment picks with the wave that originated the need.	SCP VALUE			DISTRIBUTION - PLANNING
101	fpl_replen_dest_id	Destination identifier used for replenishing of Forward Pick Locations when replenishment method is pre-planned.	DEST ID			ADMIN - SETUP, INTERNAL DEST ID
102	fpr_conf_nbr_hrs	Controls how long a FPR confirmation group stays open. Once the defined amount of time passes, RWMS removes a users ID and the group number from the pallets previously identified for receiving. The value is in hours and can accept decimals.	NUMBER	0	8	ADMIN - SETUP, RECEIVING
103	fpr_limit_to_tihi	Provides warnings when you exceed the defined Distribution Center TI/HI for a pallet when using Flexible Pallet Receiving.Valid Values: N= no warnings, C= soft warning, E = hard stop.	SCP VALUE			ADMIN - SETUP, RECEIVING
104	fstsku_bypass_fl	Indicates to conveyor system to weigh or not weigh a carton with first time SKU WIP applied.	SCP VALUE			PROCESS, RECEIVING
105	hashing_algorithm	Oracle alogorithm that will be used for hashing passwords and sending details from ADF to Oracle Forms. Select hashing algorithm availble in Oracle package DBMS_CRYPTO. For e.g. algorithm could be DBMS_CRYPTO.HASH_SH1.	STRING			SECURITY
106	hold_first_time_sku	WIP applied to all like containers for items where one container has first time SKU WIP applied.	SCP VALUE			PROCESS, RECEIVING
107	hot_replen_fulfill	Determines level at which hot replenishments are directed toward forward pick locations.If set to Y, it always directs hot Replens to forward locations if the entire container fits in the slot. If set to N, it only directs hot putaways if the forward location is below the replenishment level.	SCP VALUE			PUTAWAY
108	hot_replen_putaway	When set to Y, putaway looks for Unit Replenishment opportunities.	SCP VALUE			PUTAWAY
109	hot_replen_recvg	When set to Y, receiving allocation process looks for Unit Replenishment opportunities. When set to N, receiving allocation process functions as normal.	SCP VALUE			RECEIVING, PUTAWAY
110	in_transit_loc	Location of containers in process. Used in Move, Putaway, and Picking windows.	LOCATION			LOC OR LOC TYPE
111	incl_xdock_appt_zone	Used during the appointment creation process to recommend the best fit door. When set to Y, RWMS checks for the existence of PREDIST stock allocations and uses the PTS induct zone for items with allocations. Based on the unit pick system code assigned to the item. If set to N, cross-dock items are ignored.	SCP VALUE			ADMIN - SETUP, RECEIVING
112	interface_tcp_flag	Indicates the use of a TCP/IP interface with a conveyor system. (Future RWMS use).	SCP VALUE			DISTRIBUTION
113	kitting_activity_code	Activity code associated with kitting against which statistics are collected.	WIP CODE			ACTIVITY CODE
114	labelBulkReplnChild	Used for replenishment bulk picks only. When set to Y, bulk replenishment gets a label for every child.	SCP VALUE			DISTRIBUTION
115	label_printer_font	Specifies the desired font that should be used for label reports.	STRING			PRINTER - LABELS
116	labeled_picking	When set to Y, RWMS generates a picking label packet and a report. When set to N, RWMS assumes labeless picking and only generates a report.	SCP VALUE			DISTRIBUTION, PICKING
117	labeled_receiving	When set to Y, RWMS creates formatted receiving labels. When set to N, RWMS expects you to provide generic receiving labels.	SCP VALUE			RECEIVING
118	labeled_reserve	When set to Y, RWMS tracks each container in reserve storage with a separate identifying label. When set to N, only master containers in reserve are labeled.	SCP VALUE			DISTRIBUTION, PUTAWAY, RECEIVING
119	labeled_tote	If set to Y, labels for Unit picks prints even when labeled_picking = N.	SCP VALUE			ADMIN - SETUP
	labor_mgmt_log	When this parameter is set to 1, RWMS will log the calculated labor standards in labor_mgmt_calc_log and labor_mgmt_calc_log_details tables. When this parameter is set to 0, RWMS will not log the calculated labor standards in labor_mgmt_calc_log and labor_mgmt_calc_log_details tables.	SCP VALUE			LABOR MANAGEMENT
120	load_sequencing	When set to Y, RWMS sorts picks with respect to the defined route/destination load sequence. When set to N, RWMS sorts according to distribution number sequence.	SCP VALUE			SHIPPING
121	loading_max_nbr_cids	Allows you to define how many pallets/containers can be scanned onto a forklift at one time for loading into an outbound trailer.	NUMBER	1	999	SHIPPING
122	loc_brazil_auto_recv	Only used when local_brazil = Y. When set to Y, RWMS automatically receives (in the background) containers not physically received. At the same time, offsetting entries are made in the inventory adjustment table to remove the inventory. RWMS views this merchandise as received and immediately lost.	SCP VALUE			RECEIVING
123	local_brazil	Must be set to enable Brazil functionality.	SCP VALUE			LOCALIZATION
124	log_interface_error	Determines whether RWMS interface APIs log an error using the log_oracle_error function when an error occurs.Note: This must be set to N in an enterprise/SeeBeyond environment because of Oracle distributed processing and support for AUTONOMOUS TRANSACTIONS.	SCP VALUE			ADMIN - SETUP
125	ltc_code	Unit Pick System Code associated to the RF Unit Picking (Stationary SKU) (LTC and ltc code refer to the same operation of Less Than Case picking).	UNIT PICK			DISTRIBUTION
126	ltc_staging_loc	Location ID for replenishment drop-off going into LTC.	LOCATION			LOC OR LOC TYPE
127	max_gen_labels	Defines the maximum quantity of generic labels that can be specified on the Reprint/Null Labels window.	NUMBER	1	2000	ADMIN - SETUP, PRINTER - LABELS
128	max_inactive_time_in_aisle	Specifies how long (since last activity for a user) to keep user in an aisle before it is assumed that he has walked out of the AISLE. The value is specified in minutes.	NUMBER	0	1440	ADMIN - SETUP, TASK MANAGEMENT
129	max_invld_login_cnt	The number of allowable times a user can incorrectly enter the password into the application.	NUMBER	2	9	SECURITY
130	max_wave_nbr	Maximum wave number allowed to be maintained in the distribution windows.	NUMBER	1	999	DISTRIBUTION - PLANNING
131	max_wave_rows	Maximum number of orders/rows that may be retrieved from a specific query. This number is used when you do not include the max number as part of a query.	NUMBER	1	10000	DISTRIBUTION - PLANNING
132	metrics_purge_days	Time duration used when deleting records in the distribution_metrics and unfilled_allocations tables based upon the wave end ts.	NUMBER	1	999	ADMIN - SETUP, DISTRIBUTION
133	min_auto_wave	The lowest wave number used by RWMS when assigning orders. RWMS assigns any orders retrieved by a specific query to the first wave with the status of AVAIL, type of MANUAL and greater than or equal to the min_auto_number.	NUMBER	1	999	DISTRIBUTION - PLANNING
134	min_password_length	The minimum number of characters required for a user password.	NUMBER	3	20	SECURITY
135	mixed_dest_id	Destination ID where containers holding merchandise for different destinations are sent for separation.	DEST ID			ADMIN - SETUP, INTERNAL DEST ID
136	mixed_wip_stage_loc	Location identifier at which containers with different WIP codes are staged for separation.	LOCATION			LOC OR LOC TYPE
137	mm_allow_distrib	Determines whether or not distribution is allowed to distribute from manually marked locations.	SCP VALUE			DISTRIBUTION, INVENTORY MANAGEMENT
138	mm_sec_level_gu	To restrict user from marking Cycle Count if user privilege level is less than the SCP value in the GUI window.	NUMBER	1	9	ADMIN - SETUP, INVENTORY MANAGEMENT
139	mm_sec_level_rf	To restrict user from marking Cycle Count if user privilege level is less then the SCP value in the RF window.	NUMBER	1	9	ADMIN - SETUP, INVENTORY MANAGEMENT
140	mms_location	The warehouse location that designates the manifest mailing location.	LOCATION			SHIPPING
141	multi_open_manifest	When set to Y, indicates that multiple destinations can be actively loaded into a single trailer simultaneously.	SCP VALUE			SHIPPING
142	multi_sku_wip	WIP code applied to inbound container that contains more than one container item record.	WIP CODE			WIP CODES
143	nbr_divert_w_putawy	Used with conveyor receiving where received containers are conveyed to a Putaway area. The number is the amount of containers diverted to each Putaway lane (represents a pallet). Note: This was for the Walmart/Gap versions and is not effective for other versions.	SCP VALUE			PUTAWAY
144	nbr_items_pallet	Maximum number of items per pallet, in putaway logic.	NUMBER	1	999999999	PUTAWAY
145	oflow_replen_dest_id	Destination ID for replenishments to Overflow forward picking locations.	DEST ID			ADMIN - SETUP, INTERNAL DEST ID
146	order_line_number	Y setting indicates that orders are being tracked at the order line level.	SCP VALUE			DISTRIBUTION - PLANNING
147	order_set_stage	Location in facility where outbound cartons are directed to have order sets printed.	LOCATION			LOC OR LOC TYPE
148	order_status_upload	Y setting indicates order status information is uploaded to the host.	SCP VALUE			DISTRIBUTION, INVENTORY MANAGEMENT
149	outb_ship_label	Y setting indicates outbound cartons/pallets are directed to a PRINT and APPLY location for the application of a shipping label. N setting indicates outbound cartons/pallets are shipped with the generic picking label.	SCP VALUE			SHIPPING
150	outbound_qa_wip	WIP code to apply for cartons assigned to Outbound QA.	WIP CODE			WIP CODES
151	overage_entry_reqd	When set to Y, RWMS displays the RF Overages window before closing any type of appointment. The overages are written to the Overages to Upload file not the Receipt to Upload file. When set to N, RWMS captures overages during the normal receiving process and uploads them in the normal receipt to upload.	SCP VALUE			RECEIVING
152	override	Y setting indicates Allows user to override the suggested location in reserve storage. N setting indicates Denies the ability to override a suggested location in reserve storage.	SCP VALUE			PUTAWAY
153	pack_wave_stage	Staging location where cartons are sent to await induction into a unit sorter.	LOCATION			LOC OR LOC TYPE
154	packing_slip_qty	Specifies the number of packing slips to be generated.	NUMBER	0	9	PRINTER - LABELS
155	pallet_flow_loc_type	User defined location type for pallet flow reserve.	LOC TYPE			LOC OR LOC TYPE
156	pallet_flow_priority	Priority used during distribution to pull merchandise from case reserve.	NUMBER	1	3	DISTRIBUTION - PLANNING
157	pallet_rsv_loc_type	User-defined location type for pallet reserve.	LOC TYPE			LOC OR LOC TYPE
158	pallet_rsv_priority	Priority used during distribution to pull merchandise from case reserve.	NUMBER	1	3	DISTRIBUTION - PLANNING
159	pallet_store_putwy	Default putway plan used for pallets having items with no putaway plan defined in the item master and the number of items on the palllet is less than SCP.nbr_items_pallet.	PUTAWAY			PUTAWAY
160	pallet_tare_height	The average height of a pallet in terms of inches. This number is used in the calculation of rigid cube during the putaway process. Adds this value to the actual height to figure if it fits.	NUMBER	1	999	PUTAWAY
161	parse_publish	Y/N, Y= When publishing XML messages, parse the message prior to sending.	SCP VALUE			RIB
162	password_complexity	Set to "N" for numeric only passwords, "A" for alphabetic only passwords, "AN" for Alphanumeric only passwords (One alphabet and one number mandatory), "ANX" for Alphanumeric and any other special character based password (Minimum of one alphabet , one number and one special character(Punctuation)  mandatory) and X for any character based password. "ANX" is the suggested and the strongest setting. Any other setting will leave the system prone to brute force attacks.	STRING			SECURITY
163	password_expire	Number of days since the last password change; forces users to change their password.	NUMBER	1	365	ADMIN - SETUP, SECURITY
164	password_old	Number of days since the last password change; suggests that users change their password.	NUMBER	1	365	ADMIN - SETUP, SECURITY
165	pbl_pick_to_reserve	When set to Y, causes RWMS to generate a distribution detail record to download to the Pick-By-Light system, which causes the excess units to be re-boxed and returned to inventory. This parameter is applicable only when the pps_round_up flag is set to N	SCP VALUE			DISTRIBUTION - PPS
166	pbl_replen_dest_id	Default destination assigned for replenishment to the PPS system.	DEST ID			DISTRIBUTION - PPS
167	pend_first_time_sku	Cartons of an item on a receipt to be held on the receiving dock until the first time SKU WIP is removed.	WIP CODE			WIP CODES
168	pick_audit_queue	Line printer queue where the Pick Audit List prints.	PRINTER			PRINTER - LABELS
169	pick_bulk_case	Allows Bulk picking of single cases on Existing pallets. Excludes Single Container Bulk = Y mechandise. When set to Y, a bulk pick is generated instead of a case pick when the container quantity is 1 and the item_ master/single_contain_bulk = N	SCP VALUE			DISTRIBUTION
170	pick_by_loc_flag_con	When set to Y, RWMS is picking by location and allows mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking. When set to N, RWMS is picking by destination and does not allow mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking.	SCP VALUE			DISTRIBUTION, PICKING
171	pick_by_loc_flag_non	When set to Y, RWMS is picking by location and allows mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking. When set to N, RWMS is picking by destination and does not allow mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking.	SCP VALUE			DISTRIBUTION, PICKING
172	pick_existing	Determines whether or not to include the inbound quantity associated to a forward pick location when determining amount of units available for picking.	SCP VALUE			DISTRIBUTION
173	pick_label_queue	Label printer queue where the pick labels prints.	PRINTER			PRINTER - LABELS
174	pnad_isd_lead_time	Pick not after date/In store date lead time.	NUMBER	1	999	SHIPPING
175	po_pack	Used for transport asset tracking. When set to Y, RWMS does not expect to see the deposit components on the purchase order and assumes PO information is at a master pack level. If set to N, RWMS expects to see the deposit components on the purchase order. Communication of the detail goes back to the host as the receipt is determined by the deposit_item_detail SCP.	SCP VALUE			ADMIN - SETUP
176	pod_break_group	Used for Print on Demand functionality. Determines if pickers can specify a quantity of bulk pallet labels that is not evenly divisible by the pallet group size. If set to Y and a pallet group is broken, the next print job first prints the remaining pallets from the broken group before printing new groups. If set to N, only full group quantities can be printed.	SCP VALUE			PICKING
177	pod_nbr_groups	Used for Print on Demand functionality. It defines the maximum number of pallet groups that RWMS allows you to request for printing.	NUMBER	1	999	PICKING
178	populate_cont_weight	Determines whether or not calculated container weights are pre-populated to the RF windows.	SCP VALUE			RECEIVING
179	pps_code	Unit Pick System Code associated to a Paperless Picking System (PPS and ppsxcode refer to the same paperless picking system).	UNIT PICK			DISTRIBUTION - PPS
180	pps_drop_off_loc	Location where containers bound for PPS are dropped off.	LOCATION			DISTRIBUTION - PPS
181	pps_pick_up_loc	Location at which RWMS picks up cartons packed by PPS.	LOCATION			DISTRIBUTION - PPS
182	pps_round_up	When set to Y, the distribution process increases (round up) the distribution evenly across the destinations to consume the excess. When set to N, the process does not exceed the requested quantity. The parameter pbl_pick_to_reserve is applicable only when the pps_round_up flag is set to Y.	SCP VALUE			DISTRIBUTION - PPS
183	pre_manifest_bol	Default sequence number for pre manifest BOLs. Used in the Conveyor Cutoff and Ship Trailer windows.	NUMBER	10000	99999	SHIPPING
184	predist_timeout_sec	The time duration that the predist receiving labels print program should wait before resubmitting if a receiving process conflict is occurring for a PO and Item.	NUMBER	0	30	ADMIN - SETUP, RECEIVING
185	prepack_wip_dest	Internal Destination ID for containers with the WIP code of Prepack.	DEST ID			LOC or LOC TYPE
186	preplan_unit_replen	When set to Y, unit picks are planned to replenish the entire waves needs during the Distribution Process. When set to N, RWMS assumes the use of Re-order Point (or Max/Min) Replenishment.	SCP VALUE			DISTRIBUTION - REPLEN
187	print_and_apply	Location where print and apply labels occurs.	LOCATION			LOC or LOC TYPE, SHIPPING
188	print_locale_bi	The BI Publisher language code that is used for Reports.	STRING			ADMIN - SETUP
189	pts_adj_trbl_code	Trouble code applied to cartons with PTS adjustments when you do not have the required security level to approve adjustments in case PTS.	TRANSACTION CODE			INVENTORY MANAGEMENT
190	pts_ctn_max_days	Number of days before open Put To Store carton is flagged for closure.	NUMBER	0	9999	DISTRIBUTION - PTS
191	pts_loc_type	Default location type for Put To Store.	LOC TYPE			LOC OR LOC TYPE
192	putaway_stage_loc	Location ID used to determine the appropriate inventory location. This location is assigned as the final location of a container when destined for inventory.	LOCATION			LOC OR LOC TYPE, PUTAWAY
193	qa_bypass_fl	Indicates if sortation system should weigh an inbound carton that has a QA WIP applied.	SCP VALUE			PROCESS
194	qa_to_active	Allow cartons with QA WIPs to be sent directly to active. Works in conjunction with hot_replen_recvg.	SCP VALUE			ACTIVE - RANDOM
195	qa_wip_code	WIP code to be applied to cartons that need an inbound QA.	WIP CODE			WIP CODES
196	qc_audit_queue	Printer queue where the Quality Audit prints.	PRINTER			PRINTER - LABELS
197	qlty_activity_code	Activity Code for the Quality Audit operation.	ACTIVITY CODE			ACTIVITY CODE
198	quality_wip_code	Defined WIP code applied to cartons during the Pre-receiving Process to mark for Quality Audit.	WIP CODE			WIP CODES
199	random_active_stage	Staging location where replenishment containers for random active are placed.	LOCATION			LOC or LOC TYPE, PICKING
200	random_repln_dest_id	Destination ID for Random Acgtive Locations.	DEST ID			ADMIN - SETUP, INTERNAL DEST ID
201	rdm_debug_close	A configuration setting used by developers when executing the rdm_debug package.	SCP VALUE			TECHNICAL
202	rdm_debug_dir00	The location of the debug file used by developers when executing the rdm_debug package.	STRING			TECHNICAL
203	rdm_debug_dir01	The location of the debug file used by developers when executing the rdm_debug package.	STRING			TECHNICAL
204	reassign_wip	Defined WIP code that reassigns a group of containers from a single destination to another single destination.	WIP CODE			WIP CODES
205	rec_cases_per_hour	This value is used to calculate the expected unloading time for appointment lines received at the CARTON level.	NUMBER	1	9999999	ADMIN - SETUP, RECEIVING
206	rec_pallet_per_hour	This value is used to calculate the expected unloading time for appointment lines received at the PALLET level.	NUMBER	1	9999999	ADMIN - SETUP, RECEIVING
207	receipt_adj_nbr_hrs	Determines how many hours after closing an appointment that you allow a receipt adjustment through the container checking window. If set to 12 hours, the container checking window allows both container quantity and unit quantity adjustments up to 12 hours after close of appointment.	NUMBER	0	999	INVENTORY MANAGEMENT, RECEIVING
208	receipt_level	Determines the level at which the receipt uploads are processed.Valid Values:A = Appointment, C = Container.	SCP VALUE			ADMIN - SETUP, RECEIVING
209	recv_adjust_allowed	Determines if the adjustment type will be a receipt adjustment or inventory adjustment.	SCP VALUE			LOCALIZATION, RECEIVING
210	recv_audit_queue	Line printer queue where the Receiving Audit List prints.	PRINTER			PRINTER - LABELS
211	recv_label_queue	Printer queue where the Receiving Label Package is printed.	PRINTER			PRINTER - LABELS
212	recv_pnad_config	Determines whether a soft message or hard stop is provided during RF receiving when the Best Before Date does not provide enough processing time (wave, pick, and ship) to reach the stores before expiration.Valid Values: C = soft warning, E = hard stop.	SCP VALUE			RECEIVING
213	recv_receipt_queue	Label printer queue where the receiving labels print.	PRINTER			PRINTER - LABELS
214	recv_rnad_config	Determines whether a soft message or hard stop is provided during RF receiving when the Best Before Date does not provide enough processing time (receive, wave, pick, and ship) to reach the stores before expiration. Valid Values: C = soft warning, E = hard stop.	SCP VALUE			RECEIVING
215	recv_schedule_nbr	Used solely for Brazil and determines whether an NF schedule is downloaded from another system to provide appointment details.When set to Y, RWMS requires a schedule to be selected on the appointment detail window.	SCP VALUE			RECEIVING
216	recv_tolerance_unit	Determines whether a soft message or hard stop is provided when the unit quantity appointed is greater than the original PO quantity plus receiving tolerance percentage.The Receiving Tolerance percentage is set in the Item Supplier Editor.Valid Values: C = soft warning, E = hard stop.	SCP VALUE			RECEIVING
217	recv_tolerance_wgt	Determines whether a soft message or hard stop is provided when the weight of a specific container exceeds the receiving tolerance percent. The Receiving Tolerance percentage is set in the Item Supplier Editor.Valid Values: C = soft warning, E = hard stop.	SCP VALUE			RECEIVING
218	reg_pack_chute	Chute designator for regular packing chutes.	STRING			DISTRIBUTION - PLANNING
219	replenishment_level	When a unit picking location is expected to drop below this value, multiplied by its unit capacity, RWMS generates a replenishment pick. This is used when a forward picking location is not assigned a specific replenishment level. It is also the default level used on the startup/convert RF windows.	NUMBER	0	1	DISTRIBUTION - REPLEN
220	reprint_label_queue	Printer queue where the labels generated by the Reprint/Null Labels window are printed.	PRINTER			PRINTER - LABELS
221	reticketing_wip_code	Defined WIP code denoting containers that need new retail price tags.	WIP CODE			WIP CODES
222	return_to_vendor_loc	Location ID that identifies the location where return to vendor processing takes place.	LOCATION			RETURNS
223	return_wip	Defined WIP codes that denote a returned container.	WIP CODE			RETURNS
224	returns_location	Location ID that identifies the location where returns processing takes place.	LOCATION			RETURNS
225	rf_asn_position	Determines the starting position for display of the ASN Number on the RF windows.	NUMBER	1	30	ADMIN - SETUP
226	rf_item_position	Determines the starting position for display of the item ID on the RF windows.	NUMBER	1	20	ADMIN - SETUP
227	rop_dist_method	Determines if the distribution method is based on FIFO or PROCESS.	SCP VALUE			DISTRIBUTION - REPLEN
228	rop_use_distr_qty	Determines whether the distributed quantity in a forward pick location or less than case location is considered when creating an ROP replenishment. When set to Y, RWMS triggers a replenishment when the Owned inventory (actual inventory in location + inbound Inventory - distributed inventory) is less than the replenishment quantity in that location. When set to N, RWMS triggers a replenishment when the Owned inventory (actual inventory + inbound inventory) is less than the replenishment quantity for that location.	SCP VALUE			DISTRIBUTION - REPLEN
229	routing_purge_days	Time duration used when deleting records in the Route_Dest and Route_Date tables based upon the ship date.	NUMBER	1	999	ADMIN - SETUP, SHIPPING
230	ship_bol_queue	Line printer queue where the Bill Of Lading prints.	PRINTER			PRINTER - LABELS
231	ship_door_scan	When set to Y, this forces you to scan both the door and the container ID when loading containers in shipping.	SCP VALUE			SHIPPING
232	ship_label_queue	Printer queue where shipping labels print.	PRINTER			PRINTER - LABELS
233	ship_logical_pallet	Logical Pallet in Shipping.	SCP VALUE			SHIPPING
234	ship_seal_required	Flag that allows the DC to specify if the seal number is required when shipping.	SCP VALUE			SHIPPING
235	ship_stage	Default location used the CSR table when creating routes using third party routing package. This location is used if the routing package cannot supply a staging location.	LOCATION			LOC or LOC TYPE, SHIPPING
236	ship_unique_seal	Y indicates that each seal number must be unique.	SCP VALUE			SHIPPING
237	ship_warn_close	Flag that indicates that you receive shipping warnings when closing the trailer if yet to be loaded merchandise still exists in the DC.	SCP VALUE			SHIPPING
238	ship_warn_pt_b	Y indicates that you receive a warning of the existence of pending Bulk (B) picks for one or more of the destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
239	ship_warn_pt_c	Y indicates that you receive a warning of the existence of pending Container (C) picks for one or more of the destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
240	ship_warn_pt_cb	Y indicates that you receive a warning of the existence of pending Forward Case Pick (FCP) to Belt to Outbound (CB) picks for one or more of the destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
241	ship_warn_pt_cf	Y indicates that you receive a warning of the existence of pending FCP to Pallet to Outbound (CF) picks for one or more of the destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
242	ship_warn_pt_u	Y indicates that you receive a warning of the existence of pending Unit (U) picks for one or more of the destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
243	ship_warn_pts	Y indicates that you receive a warning of the existence of closed PTS cartons still residing in the PTS area for one or more destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
244	ship_warn_ship	Flag that indicates that you receive shipping warnings when shipping the trailer if yet to be loaded merchandise still exists in the DC.	SCP VALUE			SHIPPING
245	ship_warn_status_d	Y indicates that you receive a warning of the existence of containers with a Distributed status for one or more of the destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
246	ship_warn_status_p	Y indicates that you receive a warning of the existence of containers with a Pending Pick status for one or more of the destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
247	ship_warn_status_t	Y indicates that you receive a warning of the existence of containers with a Troubled status for one or more of the destinations associated to the trailer being processed.	SCP VALUE			SHIPPING
248	singles_sorter_group	Sorter group defined for Singles processing.	SORTER GROUP			DISTRIBUTION - PLANNING
249	smtp_domain	The domain name for e-mailing the BOL and manifest.	STRING			TECHNICAL
250	smtp_host	The host name for e-mailing the BOL and Manifest.	STRING			TECHNICAL
251	smtp_port	The port for e-mailing the BOL and manifest.	NUMBER	1	999999999	TECHNICAL
252	success_msg_fade	The time duration SUCCESSFUL OPERATION message should be displayed.	NUMBER	-1	10	ADMIN - SETUP
253	sys_dimen_uom	The unit of measure class that will be used in the system for recording dimensions (length, width, height).	UOM			UOM CONTROL
254	sys_speed_uom	The unit of measure class that will be used in the system for recording speed.	UOM			UOM CONTROL
255	sys_time_uom	The unit of measure class that will be used in the system for recording times.	UOM			UOM CONTROL
256	sys_weight_uom	The unit of measure class that will be used in the system for recording weights.	UOM			UOM CONTROL
257	task_log	Create Task Log entries to track user work. Valid values are 0:(No logging), 1:(Capture task log headers only), 2:(Capture task log headers and associated details).	SCP VALUE			ADMIN - SETUP
258	ticketing_wip_code	WIP code to apply for ticketing processing.	WIP CODE			WIP CODES
259	tote_stage	Staging location where totes are built to pallet using the Build Tote Pallet window.	LOCATION			LOC OR LOC TYPE
260	trans_wip_in_to_out	Determines whether any inbound work orders associated to a PO/Item should be applied to cross-docked containers and processed as outbound work orders.	SCP VALUE			PROCESS, WIP CODES
261	transport_balance	When Transport_balance is set to Y, RWMS sends the inventory balance of transport assets to the host. When set to N, RWMS does not send the inventory balance of transport assets to the host.	SCP VALUE			ADMIN - SETUP
262	ucc_container_app_id	Specific_business ID for use with UCC128 label generation. Value to use when creating an UCC128-compliant carton serial number.	STRING			ADMIN - SETUP, PRINTER - LABELS
263	ucc_container_org_id	Value to use when creating an UCC128-compliant carton serial number.	STRING			ADMIN - SETUP, PRINTER - LABELS
264	ucc_manufacturer_id	Value to use when creating an UCC128-compliant carton serial number.	STRING			ADMIN - SETUP, PRINTER - LABELS
265	ulc	User License Code - In tables not displayed in software.	STRING			TECHNICAL
266	unit_block_dist_flag	When set to Y, RWMS distributes units in Block. Block indicates that shortages are borne by the lower priority destinations. When set to N, RWMS distributes units in Round Robin. Round Robin spreads shortages proportionally among all destinations. Used in the distribution process for LTC locations only.	SCP VALUE			DISTRIBUTION - ACTIVE
267	unit_pick_lbl_queue	Printer queue where packing slip prints. Used in the Select Orders window for unit picks only.	PRINTER			PRINTER - LABELS
268	unknown_item	Item ID of unknown merchandise. Used in the Build Container window.	ITEM			ITEM SETUP
269	unknown_vendor	The vendor used for DC to DC shipments and for Store back to DC shipments.The unknown vendor must be set up in RMS as well.	VENDOR			ITEM SETUP, RECEIVING
270	unlocated_location	Location of lost containers, those that cannot be found during a cycle count. Used in the Count Location window.	LOCATION			LOC OR LOC TYPE
271	upld_convert_inv_adj	When set to Y, RWMS uploads an inventory adjustment when converting inventory to inventory during startup.	SCP VALUE			INVENTORY MANAGEMENT
272	use_item_dimensions	Used in cubing for forward case distribution. Y indicates Item Master dimensions used. N indicates Item Supplier dimensions used.	SCP VALUE			DISTRIBUTION
273	va_wip_code	WIP code used for when Vendor Assurance.	WIP CODE			WIP CODES
274	vas_error_capture	Y indicates captures user ID for VAS errors. Pertains to auditing of outbound containers in a Consumer Direct world.	SCP VALUE			PROCESS
275	version_number	Number of the System version.	STRING			ADMIN - SETUP
276	weigh_wip_code	Defined WIP code that assigns a WIP code to weigh merchandise that has a catch weight.	WIP CODE			WIP CODES
277	work_on_saturday	When set to Y, RWMS sets Saturday as a working day. Used in the Working Days Editor.	SCP VALUE			ADMIN - SETUP
278	work_on_sunday	When set to Y, RWMS sets Sunday as a working day. Used in the Working Days Editor.	SCP VALUE			ADMIN - SETUP
279	wt_round_robin_post	Used for unit pick locations only and the Unit_Block_ Dist_Flag must be set to Y. When set to Y, RWMS distributes units in Block. Block indicates that shortages are borne by lower priority destinations.	SCP VALUE			DISTRIBUTION
280	xzone_bulk_picking	Applies when label picking equals N only. If set to Y, when you scan a starting location and there are no bulk picks in that zone, it suggests picks from a subsequent zone. If set to N, it does not suggest picks from the next zone.	SCP VALUE			DISTRIBUTION, PICKING
281	xzone_pick	When set to Y, the distribution process creates pick across multiple zones for the same distribution. When set to N, cross-zone picking, for the same distribution, is denied.	SCP VALUE			DISTRIBUTION, PICKING
282	xzonegrp_fcpgen_pick	For FCP to pallet with generic labels. When a user scans a location to begin this type of picking, we need to know whether to look in all zones and zone groups for a pick or restrict only to the zone/zone group for the scanned location. When set to Y, we look all over. When set to N, we only look in the zone or zone group for the location that was scanned as the start loc.	SCP VALUE			DISTRIBUTION, PICKING