Installation Guide
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
The following sections describe how to run the installation program in silent mode:
Silent-mode installation is a way of setting installation configurations only once and then using those configurations to duplicate the installation on many machines. During installation in silent mode, the installation program reads the settings for your configuration from an XML file that you create prior to beginning the installation. The installation program does not display any configuration options during the installation process. Silent-mode installation works on both Windows and UNIX systems. Using silent-mode installation implies that you consent to the BEA License Agreement. You neither see a copy of the BEA Software License Agreement nor have any means of accepting the terms of the agreement.
The instructions in this section are based on the assumption that you have already acquired the installation program, either on CD or from the BEA Web site. For more information, see Product Distribution Methods.
The silent-mode installation process has two primary steps:
silent.xml
file that defines the configuration settings normally entered by a user during an interactive installation process, such as graphical-mode or console-mode installation. For example, values for the BEA Home directory, the product directory, and the components to be installed are supplied in a silent.xml
file.For a detailed procedure, see Creating a silent.xml File for Silent-Mode Installation. For a sample silent.xml
file, see Sample silent.xml File for Silent-Mode Installation.
For details on starting the installation in silent mode, see Starting the Installation Program.
When you are performing an installation in silent mode, keep in mind the following considerations:
silent.xml
file can cause installation failures. To help you determine the cause of a failure, we recommend that you create a log file when you start the installation. For more information, see Generating a Verbose Installation Log.<?xml version="1.0" encoding="UTF-8"?>
) must be at the very beginning of the silent.xml
file. There cannot be any spaces or line breaks before the XML definition.
When you install your BEA software in silent mode, the installation program uses an XML file (silent.xml
) to determine which installation options should be implemented. Therefore, before you can run the installation program in silent mode, you must first create a silent.xml
file in which you specify the installation options that you want to have invoked.
Note: Incorrect entries in the silent.xml
file can cause installation failures. To help you determine the cause of a failure, we recommend that you create a log file when you start the installation.
To create a silent.xml
file for use in the silent-mode installation process, follow these steps:
silent.xml
file for silent-mode installation. The sample file is available at http://download.oracle.com/docs/cd/E13179_01/common/docs91/install/scripts/silent.xml
.This sample silent.xml
file is also presented later in this chapter. See Sample silent.xml File for Silent-Mode Installation.
silent.xml
, in the same directory that contains the installation program.Note: The XML definition (<?xml version="1.0" encoding="UTF-8"?>
) must be at the very beginning of the silent.xml
file. There cannot be any spaces or line breaks before the XML definition.
silent.xml
file that you saved on your system, edit the values for the keywords shown in Table 5-1 to reflect your configuration.Note: You must follow XML guidelines for characters when modifying values. That is, you cannot use characters reserved for use in XML, such as <
, >
, [
, and ]
.
The full pathname for the BEA Home directory of your choice. For details about the BEA Home directory, see Choosing a BEA Home Directory. |
|
The full pathname for the directory where you want to install your BEA software. For details, see Choosing a Product Installation Directory. |
|
Note: You must have Administrator privileges to install Node Manager as a Windows service. |
|
If you do not specify a port number, the installer uses the default port 5556. If the port number is in use, the installer scans for the next available port and assigns it to the Node Manager. Note: The At the completion of the installation process, the Node Manager is started using the port specified. |
|
Selecting Note: For more information about the Mercury profiling tools, see BEA JRockit JDK. |
|
The user performing the installation must have Administrator privileges to install the Start menu shortcuts in the All Users folder. For more information, see Administrator Privileges. |
|
Specify the components and subcomponents you want to install on your system: Note: The Web Server Plug-Ins subcomponent is not installed by default with WebLogic Server. You must specify the component/subcomponent combination to install them. For additional information about entering these values, see Guidelines for Component Selection. Note: If you are using the BEA Products installation program for WebLogic Server, you can specify the WebLogic Server components only. |
Use the following guidelines when you specify values for the COMPONENT_PATHS
data-value name:
<data-value name="COMPONENT_PATHS" value="WebLogic Server" />
Note: The Web Server Plug-Ins subcomponent is not installed by default. You must specify the component/subcomponent combination to install them.
<data-value name="COMPONENT_PATHS" value="WebLogic Server|AquaLogic Service Bus" />
<data-value name="COMPONENT_PATHS" value="WebLogic Server/Server|
WebLogic Server/Server Examples|WebLogic Server/Web Server Plug-Ins" />
COMPONENT_PATHS
data-value name in the silent.xml
file, the complete WebLogic Server and AquaLogic Service Bus products are installed. The Web Server Plug-ins subcomponent of WebLogic Server is not installed by default. Note: The installation program performs dependency checking to ensure that all components that provide functionality on which other components depend for proper operation are installed. These dependencies are visible during graphical and console mode installations. The same dependencies are enforced during silent installation: components on which other components depend are installed even if they are not explicitly referenced in a silent script.
<?xml version="1.0" encoding="UTF-8"?>
<!-- Silent installer option: -mode=silent -silent_xml=C:\bea\silent.xml -->
<!-- Specify values for each data-value name as follows:
BEAHOME Complete pathname to the BEA Home directory that
will contain this installation.
USER_INSTALL_DIR Complete pathname to the product installation
directory in which to install the software.
INSTALL_MERCURY_PROFILING_TOOLS
Optionally install Mercury profiling tools.
Possible values are "true","yes","false"
and "no". The default is "true".
INSTALL_NODE_MANAGER_SERVICE Install Node Manager as a Windows
service. The default is "no".
Requires Administrator privileges.
NODEMGR_PORT Node Manager listen port number. If none specified,
installer uses default port 5556.
INSTALL_NODE_MANAGER_SERVICE must be set to "yes"
COMPONENT_PATHS Components and subcomponents to be installed.
To install multiple components, separate the components
with a bar (|).
To install subcomponents, specify a
component/subcomponent combination. For example,
to install Web Server Plug-Ins,
use "WebLogic Server/Web Server Plug-Ins".
INSTALL_SHORTCUT_IN_ALL_USERS_FOLDER
The Windows Start menu folder in which you want the
Start menu shortcuts created.
The user performing the installation must have
Administrator privileges to install the shortcuts
in the All Users folder.
Possible values:
true/yes The shortcuts are created in
the All Users folder (default)
false/no The shortcuts are created in
the local user's folder
See the Installation Guide for more information. -->
<bea-installer>
<input-fields>
<data-value name="BEAHOME" value="C:\bea" />
<data-value name="USER_INSTALL_DIR" value="C:\bea\weblogic91" />
<data-value name="INSTALL_MERCURY_PROFILING_TOOLS" value="true"/>
<data-value name="INSTALL_NODE_MANAGER_SERVICE" value="yes" />
<data-value name="NODEMGR_PORT" value="5559" />
<data-value name="COMPONENT_PATHS" value="WebLogic Server/Server|WebLogic
Server/Server Examples|WebLogic Server/Web Server Plug-Ins|AquaLogic Service Bus" />
<data-value name="INSTALL_SHORTCUT_IN_ALL_USERS_FOLDER" value="yes"/>
</input-fields>
</bea-installer>
When run in silent mode, the installation program generates exit codes that indicate the success or failure of the installation. These exit codes are shown in the following table.
If you are launching the silent-mode installation process from a script, you can choose to have these exit codes displayed on the console. Listing 5-1 provides a sample command file that invokes the installation program in silent mode and echoes the exit codes to the console from which the script is executed.
Listing 5-1 Sample Command File Displaying Silent-Mode Exit Codes
rem Execute the installer in silent mode
@echo offalsb210_wls910_win32
.exe -mode=silent -silent_xml=C:\downloads\silent.xml -log=C:\logs\products_silent.log
@rem Return an exit code to indicate success or failure of installation
set exit_code=%ERRORLEVEL%
@echo.
@echo Exitcode=%exit_code%
@echo.
@echo Exit Code Key
@echo ---------------
@echo 0=Installation completed successfully
@echo -1=Installation failed due to a fatal error
@echo -2=Installation failed due to an internal XML parsing error
@echo.
By default, your BEA software uses the development license file installed in the BEA Home directory so that you can start using the product immediately. We recommend that you run the QuickStart application to familiarize yourself with the software and execute the samples provided. For additional information, see Post-Installation Information.
Note: QuickStart is not invoked automatically for console-mode or silent-mode installations. You can launch QuickStart from the Start Menu (Windows), or from the command line (Windows and UNIX). For instructions, see Using QuickStart.
For specific information about your software release, see the appropriate release notes:
http://download.oracle.com/docs/cd/E13222_01/wls/docs91/notes/index.html
http://download.oracle.com/docs/cd/E13171_01/alsb/docs21/relnotes/index.html
http://download.oracle.com/docs/cd/E13179_01/common/docs91/relnotes/index.html
![]() ![]() |
![]() |
![]() |