---

6. LIBQM Messages 1600-1699

---

1600	ERROR: Memory allocation failure
	Description	An attempt to dynamically allocate memory from the operating system using malloc () failed in TMQFORWARD while parsing and storing the command line queue names. The server will not boot.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
	See Also	TMQFORWARD(5)
1601	ERROR: realloc() failed
	Description	An attempt to dynamically re-allocate memory from the operating system using realloc () failed in TMQFORWARD while parsing and storing the command line queue names. The server will not boot.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
	See Also	TMQFORWARD(5)
1602	WARN: -t option ignored as argument must be numeric
	Description	The argument for the -t option on the command line for TMQFORWARD is non-numeric and is ignored. The default transaction time value will be used.
	Action	Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -t option is a numeric value indicating the number of seconds before transaction timeout occurs.
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1603	WARN: -t option ignored as argument is too large
	Description	The numeric argument for the -t option on the command line for TMQFORWARD is too large and is ignored. The default transaction time value will be used.
	Action	Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -t option is a numeric value less than 2147483648 indicating the number of seconds before transaction timeout occurs.
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1604	WARN: -i option ignored as argument must be numeric
	Description	The argument for the -i option on the command line for TMQFORWARD is non-numeric and is ignored. The default idle time value, 30 seconds, will be used.
	Action	Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -i option is a numeric value indicating the number of seconds that the server is idle after finding no messages on the queues before it reads the queues again.
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1605	WARN: -i option ignored as argument is too large
	Description	The numeric argument for the -i option on the command line for TMQFORWARD is too large and is ignored. The default idle time value, 30 seconds, will be used.
	Action	Change the server command line options, CLOPT, for the TMQFORWARD server such that the argument for the -i option is a numeric value less than 2147483648 indicating the number of seconds that the server is idle after finding no messages on the queues before it reads the queues again.
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1606	WARN: Invalid command line argument 'opt' ignored
	Description	An invalid option, opt, was specified on the command line for TMQFORWARD.
	Action	Change the server command line options, CLOPT, for the TMQFORWARD server to remove the invalid command line option. Check the manual page for valid options.
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1607	ERROR: -q option not specified
	Description	The -q option is a required option for the TMQFORWARD and was not specified in the command line options. The server will not boot.
	Action	Change the server command line options, CLOPT, for the TMQFORWARD server to include the -q option with a list of one or more queues for which the server will forward queued messages.
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1608	ERROR: TMSNAME must be TMS_QM
	Description	The application is configured such that the TMQFORWARD server is in a group in the GROUPS section that does not have the TMSNAME set to TMS_QM. The server will not boot.
	Action	Change the TUXCONFIG file to have the TMSNAME set to TMS_QM and reboot the TMQFORWARD server.
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1609	WARN: [Unable to verify that TMSNAME begins with TMS_QM]
	Description	The TMQFORWARD server was unable to verify that the TMSNAME for the group in the GROUPS section associated with TMQFORWARD is set to TMS_QM (that is, it was unable to find the corresponding GROUPS entry).
	Action	Contact your BEA TUXEDO system Technical Support.
	See Also	TMQFORWARD(5)
1610	ERROR: Must not have a reply queue configured
	Description	The application is configured such that the TMQFORWARD server has a reply queue. The server will not boot.
	Action	Change the TUXCONFIG file such that the TMQFORWARD server does not have a reply queue (that is, REPLYQ=N).
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1611	ERROR: Must not be configured as part of an MSSQ
	Description	The application is configured such that the TMQFORWARD server is part of an multiple-server-single-queue, MSSQ, set. The server will not boot.
	Action	Change the TUXCONFIG file such that the TMQFORWARD server is not part of an MSSQ set (that is, don't specify a RQADDR).
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1612	ERROR: Must not advertise services
	Description	The application is configured such that the TMQFORWARD server advertised services as part of booting. The server will not boot.
	Action	Change the TUXCONFIG file such that the CLOPT for the TMQFORWARD server does not include the -s option. If a custom version of TMQFORWARD is built using buildserver, don't specify the -s option.
	See Also	TMQFORWARD(5), buildserver(1), tmconfig(1), ubbconfig(5)
1613	ERROR: tpopen() failed, tperrno = tperrno
	Description	While initializing the TMQFORWARD server, tpopen () returned an error. The server will not boot.
	Action	Use the returned tperrno and check the userlog to determine what the error was. Resolve the problem and re-boot the server.
	See Also	TMQFORWARD(5)
1614	ERROR: Queue name not found
	Description	One of the queue names, name, specified as an argument to the -q option of the TMQFORWARD server is not valid for the associated queue space. The server will not boot.
	Action	Use the qinfo command of qmadmin to get a list of valid queues for the queue space. Change the TUXCONFIG file such that the CLOPT for the TMQFORWARD server has a valid list of queue names for the -q option and re-boot the server.
	See Also	TMQFORWARD(5), tmconfig(1), ubbconfig(5)
1615	WARN: Dropping message received
	Description	An application message was received by the TMQFORWARD server. Since the TMQFORWARD server is not set up to handle application messages directly, the message was dropped. (The TMQFORWARD server cannot be booted if it advertises services but there is no mechanism to keep an administrator from dynamically advertizing services for the server from tmadmin ).
	Action	Unadvertise any services that were accidentally advertised for the TMQFORWARD server.
	See Also	TMQFORWARD(5), tmadmin(1)
1616	ERROR: Failed to start a transaction count times; exiting
	Description	The TMQFORWARD server has failed to start a transaction via tpbegin count times. The server will exit (assuming that there something is wrong).
	Action	If the TMQFORWARD server is set to restart, then the server will be restarted automatically. Check for other userlog messages that may indicate the problem.
	See Also	TMQFORWARD(5)
1617	INFO: no messages on queues - shutting down
	Description	The TMQFORWARD server tried to dequeue a message from each of the queues named in the -q command line option and found no messages on any queue. The -e command line option was specified and the server is shutting down gracefully.
	Action	No action required.
	See Also	TMQFORWARD(5)
1618	ERROR: tpalloc() failed - server exiting
	Description	An attempt to dynamically allocate a typed buffer using tpalloc() failed in TMQFORWARD. The failure will cause the server to exit.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The server will restart automatically if it is configured as restartable.
	See Also	TMQFORWARD(5)
1619	ERROR: tprealloc() failed - server exiting
	Description	An attempt to dynamically re-allocate a typed buffer using tprealloc() failed in TMQFORWARD. The failure will cause the server to exit.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The server will restart automatically if it is configured as restartable.
	See Also	TMQFORWARD(5)
1620	ERROR: _tpalloc() failed - server exiting
	Description	An attempt to dynamically allocate space using _tpalloc () failed in TMQFORWARD. The failure will cause the server to exit.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The server will restart automatically if it is configured as restartable.
	See Also	TMQFORWARD(5)
1621	WARN: Unable to dequeue message for deleting, diagnostic diagnostic
	Description	A message was dequeued and forwarded to the associated service. The server returned failure and an application message. The -d option was specified on the TMQFORWARD server command line but TMQFORWARD was unable to delete the queued message from the queue. The associated diagnostic, diagnostic, is printed as part of the message.
	Action	Determine what caused the dequeuing to fail. Most likely, the message reached the retry limit and was moved to the error queue; in this case, the diagnostic would be QMENOMSG . In the worst case, the message will not be deleted from the queue and will be executed again.
	See Also	TMQFORWARD(5), tpdequeue(3c)
1622	WARN: Unable to enqueue failure message, diagnostic diagnostic
	Description	A message was dequeued and forwarded to the associated service. The server returned failure and an application message. The -d option was specified on the TMQFORWARD server command line but TMQFORWARD was unable to enqueue the reply message on the failure queue. The associated diagnostic, diagnostic, is printed as part of the message.
	Action	Determine what caused the enqueuing to fail based on the diagnostic and by looking for other messages in the userlog and take actions (based on the associated system message manual for the printed messages) to ensure that it doesn't happen again. In this case, the reply message is lost.
	See Also	TMQFORWARD(5), tpenqueue(3c)
1623	WARN: Failed to dequeue message and queue failure message, tperrno = tperrno
	Description	A message was dequeued and forwarded to the associated service. The server returned failure and an application message. The -d option was specified on the TMQFORWARD server command line but TMQFORWARD was unable to commit the transaction in which the original message was dequeued and the reply message was enqueued on the failure queue.
	Action	Determine what caused the transaction to fail by looking for other messages in the userlog and take actions (based on the associated system message manual for the printed messages) to ensure that it doesn't happen again. In this case, the reply message is lost.
	See Also	TMQFORWARD(5), tpcommit(3c)
1624	WARN: Failed to start transaction to handle service failure, tperrno = tperrno
	Description	A message was dequeued and forwarded to the associated service. The server returned failure and an application message. The -d option was specified on the TMQFORWARD server command line but TMQFORWARD was unable to start a transaction in which the original message is dequeued and the reply message is enqueued on the failure queue.
	Action	Determine what caused the transaction start, tpbegin , to fail by looking for other messages in the userlog and take actions (based on the associated system message manual for the printed messages) to ensure that it doesn't happen again. In this case, the reply message is lost.
	See Also	TMQFORWARD(5), tpbegin(3c)
1625	WARN: -t option ignored as argument must be numeric
	Description	The argument for the -t option on the command line for TMQUEUE is non-numeric and is ignored. The default transaction time value will be used.
	Action	Change the server command line options, CLOPT , for the TMQUEUE server such that the argument for the -t option is a numeric value indicating the number of seconds before transaction timeout occurs.
	See Also	TMQUEUE(5), tmconfig(1), ubbconfig(5)
1626	WARN: -t option ignored as argument is too large
	Description	The numeric argument for the -t option on the command line for TMQUEUE is too large and is ignored. The default transaction time value will be used.
	Action	Change the server command line options, CLOPT , for the TMQUEUE server such that the argument for the -t option is a numeric value less than 2147483648 indicating the number of seconds before transaction timeout occurs.
	See Also	TMQUEUE(5), tmconfig(1), ubbconfig(5)
1627	WARN: Invalid command line option 'opt' ignored
	Description	An invalid option, opt, was specified on the command line for TMQFORWARD and ignored.
	Action	Change the server command line options, CLOPT , for the TMQFORWARD server to remove the invalid command line option. Check the manual page for valid options.
	See Also	TMQUEUE(5), tmconfig(1), ubbconfig(5)
1628	ERROR: TMSNAME must begin with TMS_QM
	Description	The application is configured such that the TMQUEUE server is in a group in the GROUPS section that does not have the TMSNAME set to TMS_QM.
	Action	Change the TUXCONFIG file to have the TMSNAME set to and reboot the TMQUEUE server.
	See Also	TMQUEUE(5), tmconfig(1), ubbconfig(5)
1629	WARN: [Unable to verify that TMSNAME begins with TMS_QM]
	Description	The TMQUEUE server was unable to verify that the TMSNAME for the group in the GROUPS section associated with TMQUEUE is set to TMS_QM (that is, it was unable to find the corresponding GROUPS entry).
	Action	Contact your BEA TUXEDO system Technical Support.
	See Also	TMQUEUE(5)
1630	ERROR: tpopen() failed, tperrno = tperrno
	Description	While initializing the TMQUEUE server, tpopen () returned an error.
	Action	Use the returned tperrno and check the userlog to determine what the error was. When the problem has been resolved, re-boot the server.
	See Also	TMQUEUE(5)
1631	WARN: TMQUEUE received the wrong buffer type - type
	Description	The TMQUEUE server received a message from an application program that was sent via tpcall or tpconnect instead of tpenqueue or tpdequeue. A failure message is returned to the originator.
	Action	Re-write the application software or re-configuration the TUXCONFIG file so that messages are sent to the correct services using the correct primitives.
	See Also	TMQUEUE(5), tpcall(3c), tpconnect(3c), tpdequeue(3c), tpenqueue(3c)
1632	WARN: [TMQUEUE received a buffer for other than ENQUEUE or DEQUEUE, opcode opcode]
	Description	The TMQUEUE server received a message with an invalid operation code, opcode.
	Action	Contact your BEA TUXEDO system Technical Support.
	See Also	TMQUEUE(5)
1633	ERROR: [Failed to get field fieldname from operation message]
	Description	The TMQUEUE server could not get the specified field, fieldname, while performing the operation. The operation can be "tpenqueue" or "tpdequeue", and the fieldname can be "FLAGS", "QNAME", "CORRID", "FAILUREQ", "MSGID", "PRIORITY", "REPLYQ", or "TIME".
	Action	The operation will fail. Contact your BEA TUXEDO system Technical Support.
	See Also	qmadmin(1)
1634	WARN: [Failed to set field fieldname in operation message]
	Description	The TMQUEUE server could not set the specified field, fieldname, in the reply message while performing the operation. The operation can be "tpenqueue" or "tpdequeue", and the fieldname can be "DIAGNOSTIC", "FLAGS", "CORRID", "FAILUREQ", "MSGID", "PRIORITY", or "REPLYQ".
	Action	The operation will succeed but the associated information will not be passed back to the application from the tpenqueue or tpdequeue call. Contact your BEA TUXEDO system Technical Support.
	See Also	TMQUEUE(5), tpdequeue(3c), tpenqueue(3c)
1635	ERROR: tranop failed during operation, tperrno = tperrno
	Description	The TMQUEUE server received a request that was not in transaction mode and was unable to begin or commit a transaction. The tranop is either "tpbegin" or "tpcommit" and operation is either "tpenqueue" or "tpdequeue".
	Action	The tpenqueue or tpdequeue operation will fail. Use the returned tperrno and check the userlog to determine what the error was.
	See Also	TMQUEUE(5), tpdequeue(3c), tpenqueue(3c)
1636	ERROR: tprealloc() failed - server exiting
	Description	An attempt to dynamically re-allocate a typed buffer using tprealloc () failed in TMQUEUE. The failure will cause the server to exit.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The server will restart automatically if it is configured as restartable.
	See Also	TMQUEUE(5)
1637	ERROR: TMQUEUE cannot be a conversational server
	Description	The application is configured such that the TMQUEUE server is a conversational server (that is, its entry in the configuration has "CONV=Y").
	Action	Change the TUXCONFIG file to configure TMQUEUE as a request/response server (without CONV=Y) and reboot the TMQUEUE server.
	See Also	TMQUEUE(5), tmconfig(1), ubbconfig(5)
1638	ERROR: Unable to re-enqueue message
	Description	The TMQFORWARD server was run with the -n option which indicates that the forwarding is not being run within a transaction. In this case, the message was deleted from the queue, the associated service was called, the call failed, and the message cannot be put back on the queue.
	Action	If the application cannot afford to lose messages, don't use the -n option on TMQFORWARD (atomicity can only be guaranteed within transactions).
	See Also	TMQFORWARD(5)
1639	ERROR: TA_MAXPAGES can only be increased
	Description	An /Admin API request attempted to change the number of pages allocated to a queue space by specifying that the number be decreased or remain the same. This is an invalid request; the number of pages can only be increased.
	Action	To decrease the number of pages allocated to a queue space, the queue space must be deleted and then recreated with the desired number of pages. These operations will also delete all messages in the queue space unless the messages are first dequeued and then enqueued to another queue space.
	See Also	APPQ_MIB(5)
1640	ERROR: Cannot update TA_MAXQUEUES after queue space is created
	Description	An /Admin API request specified a change to the maximum number of queues in a queue space. This is an invalid request; the maximum number of queues cannot be changed after the queue space is created.
	Action	To change the maximum number of queues in a queue space, the queue space must first be deleted and then recreated with the desired maximum number of queues. These operations will also delete all messages in the queue space unless the messages are dequeued and then enqueued to another queue space.
	See Also	APPQ_MIB(5)
1642	ERROR: /Q error processing /Admin service request
	Description	An error occurred during the processing of an /Admin API request. The cause of the error is recorded in the userlog on the machine where the queue space is located.
	Action	Examine the userlog for more information.
	See Also	APPQ_MIB(5)
1643	ERROR: Invalid attribute value on SET request
	Description	The value specified on a SET request for the attribute indicated by the TA_BADFLD attribute in the reply buffer is invalid. Valid values for writable attributes are specified on the APPQ_MIB manual page for the appropriate class.
	Action	Correct the attribute value in question to a valid value.
	See Also	APPQ_MIB(5)
1644	ERROR: Device specified in TA_QMCONFIG does not exist
	Description	The /Admin API request to create a new queue space failed because the device where the queue space is to be located does not exist.
	Action	Create the device, then resubmit the request to create the queue space. The device can be created via the /Admin API (using SET NEW to create an object of the T_DEVICE class), or via the crdl command of qmadmin or tmadmin.
	See Also	qmadmin(1), tmadmin(1), APPQ_MIB(5), TM_MIB(5)
1645	ERROR: Cannot update TA_APPQORDER after queue is created
	Description	An /Admonish request attempted to change the order in which messages in the queue are to be processed. This is an invalid request; the order cannot be changed after the queue is created.
	Action	To change the message processing order of a queue, the queue must be deleted and then recreated with the desired order. These operations will also delete all messages in the queue unless the messages are first moved to another queue.
	See Also	APPQ_MIB(5)
1646	ERROR: Unable to determine license level
	Description	An error occurred while retrieving the current license attributes.
	Action	Contact your BEA TUXEDO system Technical Support.
1647	ERROR: No license for /Q
	Description	You do not have a license to use /Q.
	Action	Purchase a license for /Q. If you believe that you own and have installed the license for /Q, contact your BEA TUXEDO system Technical Support.
1648	ERROR: Unable to determine license level
	Description	An error occurred while retrieving the current license attributes.
	Action	Contact your BEA TUXEDO system Technical Support.
1649	ERROR: No license for /Q
	Description	You do not have a license to use /Q.
	Action	Purchase a license for /Q. If you believe that you own and have installed the license for /Q, contact your BEA TUXEDO system Technical Support.
1650	ERROR: Unable to determine license level
	Description	An error occurred while retrieving the current license attributes.
	Action	Contact your BEA TUXEDO system Technical Support.
1651	ERROR: No license for /Q
	Description	You do not have a license to use /Q.
	Action	Purchase a license for /Q. If you believe that you own and have installed the license for /Q, contact your BEA TUXEDO system Technical Support.

---

---