![]() |
![]() |
|
|
1401 |
WARN: tpforward tpacall failure errcode | |
|
Description |
A service routine's |
Action |
Diagnose this problem based on the error return code shown in the userlog message. One likely cause is that the service being forwarded to is not available. | |
See Also |
| |
1406 |
ERROR: Memory allocation failure within interoperability processing | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
See Also |
| |
1407 |
WARN: TMDEBUG regular expression invalid. Ignoring regular expression. | |
|
Description |
A system debugging enabled binary is being used, and the debugging value provided via the environment contains an invalid regular expression. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
1409 |
ERROR: Suspended client attempting to generate new request | |
|
Description |
A suspended client attempted to inject new work into the domain. Clients are suspended by the application administrator using either the /AdminGUI or /AdminAPI. |
Action |
Contact your application administrator to determine why the client was suspended and when they might expect to be unsuspended. | |
See Also |
Administering the BEA TUXEDO System, BEA TUXEDO Administrator's Guide to the Web-Based GUI, | |
1410 |
ERROR: Suspended client attempting to generate new request | |
|
Description |
A suspended client attempted to inject new work into the domain. Clients are suspended by the application administrator using either the /AdminGUI or /AdminAPI. |
Action |
Contact your application administrator to determine why the client was suspended and when they might expect to be unsuspended. | |
See Also |
Administering the BEA TUXEDO System, BEA TUXEDO Administrator's Guide to the Web-Based GUI, | |
1411 |
ERROR: Suspended client attempting to generate new conversation | |
|
Description |
A suspended client attempted to start a new conversation. Clients are suspended by the application administrator using either the /AdminGUI or /AdminAPI. |
Action |
Contact your application administrator to determine why the client was suspended and when they might expect to be unsuspended. | |
See Also |
Administering the BEA TUXEDO System, BEA TUXEDO Administrator's Guide to the Web-Based GUI, | |
1412 |
ERROR: Suspended client attempting to start new transaction | |
|
Description |
A suspended client attempted to start a new transaction. Clients are suspended by the application administrator using either the /AdminGUI or /AdminAPI. |
Action |
Contact your application administrator to determine why the client was suspended and when they might expect to be unsuspended. | |
See Also |
Administering the BEA TUXEDO System, BEA TUXEDO Administrator's Guide to the Web-based GUI, | |
1413 |
WARN: Client aborting processing | |
|
Description |
The client generating the userlog message has been administratively set to a state of DEAD. This has been detected within the BEA TUXEDO system libraries invoked by the client, and the client is abortively terminating processing via a call to |
Action |
Contact your application administrator to see why the client was abortively terminated. | |
See Also |
Administering the BEA TUXEDO System, | |
1414 |
WARN: Client aborting processing | |
|
Description |
The client generating the userlog message has been administratively set to a state of DEAD. This has been detected within the BEA TUXEDO system libraries invoked by the client, and the client is abortively terminating processing via a call to |
Action |
Contact your application administrator to see why the client was abortively terminated. | |
See Also |
Administering the BEA TUXEDO System, | |
1415 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
See Also |
| |
1416 |
ERROR: Server group active on primary location | |
|
Description |
A server attempted to boot on the backup site for its server group while servers in the group were active on the group's primary site. |
Action |
Restart the server on the primary site. | |
See Also |
Administering the BEA TUXEDO System, | |
1417 |
ERROR: Application initialization failure | |
|
Description |
An application initialization failure occurred in the |
Action |
Examine application specific code to determine the cause of the error. | |
See Also |
BEA TUXEDO Programmer's Guide, | |
1418 |
ERROR: invalid server group information given | |
|
Description |
Server group deletion was invoked with invalid server group information. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
1419 |
ERROR: Cannot advertise service names beginning with '.' | |
|
Description |
An application server attempted to advertise a reserved service name (that is, one beginning with the character '.') during server initialization. |
Action |
Modify the configuration file entry and/or the | |
See Also |
Administering the BEA TUXEDO System, BEA TUXEDO Programmer's Guide, | |
1420 |
ERROR: Cannot advertise service names beginning with '.' | |
|
Description |
An application server attempted to advertise a reserved service name (that is, one beginning with the character '.') during server initialization. |
Action |
Modify the configuration file entry and/or the | |
See Also |
Administering the BEA TUXEDO System, BEA TUXEDO Programmer's Guide, | |
1421 |
ERROR: Out of order routing table found | |
|
Description |
The configuration file routing table was in an inconsistent state and could not be processed. |
Action |
Remove your BEA TUXEDO system configuration file, reconfigure the application, and reboot. | |
See Also |
Administering the BEA TUXEDO System, | |
1422 |
WARN: Cannot compute field name fldname view offset for criteria crit type typ subtype subtyp | |
|
Description |
The system could not map the field name fldname to a corresponding view offset while processing routing criteria crit for buffer type typ and subtype subtyp. The indicated criteria entry is added to the bulletin board; however, routing using this criterion will not succeed from this site due to the field name mapping problem. |
Action |
Check the environment file for the site in question to ensure that the appropriate environment variables (that is, | |
See Also |
Administering the BEA TUXEDO System, | |
1423 |
WARN: Cannot route on unknown buffer type typ | |
|
Description |
A ROUTING section entry was specified in the |
Action |
Correct the entry to use one of the supported types or remove the entry from the configuration file altogether. | |
See Also |
Administering the BEA TUXEDO System, | |
1424 |
ERROR: Routing field fld type mismatch for routing criteria crit, type typesepsubtyp, ignored | |
|
Description |
The routing field fld had a different data type in routing criteria entry crit for buffer type typ and subtype subtyp than it did for an earlier buffer type in the same routing entry. |
Action |
Split the routing specification for the two buffer types into separate entries, each with routing rules appropriate for the data type of the field in that buffer type. Alternatively, the buffer types themselves may be changed to bring the data types into alignment. This would typically mean modifying an FML field or a VIEW specification. | |
See Also |
Administering the BEA TUXEDO System, BEA TUXEDO FML Programmer's Guide, | |
1425 |
WARN: Duplicate routing criteria crit type typ combination ignored | |
|
Description |
A routing criteria crit, buffer type combination typ was specified more than once in the ROUTING section of the |
Action |
Correct the configuration file to remove the duplicate entry, and rerun | |
See Also |
Administering the BEA TUXEDO System, | |
1426 |
ERROR: Insufficient routing table space to create entry for criteria crit type typ | |
|
Description |
The indicated routing criteria type combination (crit/typ) could not be created due to table size restrictions in the bulletin board. |
Action |
Increase the sizes of the bulletin board tables and reboot the application. These parameters include | |
See Also |
Administering the BEA TUXEDO System, | |
1427 |
ERROR: System error(tperrmsg) creating routing table for criteria crit type typ | |
|
Description |
The BEA TUXEDO system error indicated by tperrmsg occurred while attempting to create a new routing criteria table entry for crit/typ. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
1428 |
ERROR: Cannot map field name fld to field identifier for criteria crit type typ | |
|
Description |
The indicated ROUTING section entry could not be added to the bulletin board because the specified field name fld could not be mapped to a field identifier. |
Action |
Check the environment file for the site in question to ensure that the environment variables | |
See Also |
Administering the BEA TUXEDO System, | |
1429 |
ERROR: Cannot compute field name fldname view offset for criteria crit type typ subtype subtyp | |
|
Description |
The system could not map the field name fldname to a corresponding view offset while processing routing criteria crit for buffer type typ and subtype subtyp. The indicated routing criterion is ignored and processing continues. |
Action |
Check the environment file for the site in question to ensure that the appropriate environment variables (that is, | |
See Also |
Administering the BEA TUXEDO System, | |
1430 |
WARN: Ignoring routing entry crit, invalid buffer type specified | |
|
Description |
Routing criteria crit is ignored by the system due to invalid buffer types being specified. |
Action |
ROUTING section entries must use only system supported buffer types as defined in | |
See Also |
Administering the BEA TUXEDO System, | |
1431 |
WARN: Cannot compute field name fldname view offset for criteria crit type typ subtype subtyp | |
|
Description |
The system could not map the field name fldname to a corresponding view offset while processing routing criteria crit for buffer type typ and subtype subtyp. The indicated criterion entry is added to the bulletin board; however, routing using this criterion will not succeed from this site due to the field name mapping problem. |
Action |
Check the environment file for the site in question to ensure that the appropriate environment variables (that is, | |
See Also |
Administering the BEA TUXEDO System, | |
1432 |
ERROR: Corrupted routing range table found | |
|
Description |
The configuration file routing table was in an inconsistent state and could not be processed. |
Action |
Remove your BEA TUXEDO system configuration file, reconfigure the application, and reboot. | |
See Also |
Administering the BEA TUXEDO System, | |
1433 |
WARN: Invalid trace category; trace point ignored | |
|
Description |
The category (for example, atmi) associated with a trace point is not a known category. The trace point was therefore ignored. |
Action |
No action required. | |
See Also |
| |
1434 |
ERROR: Invalid trace specification; ignored | |
|
Description |
A syntactically incorrect trace specification was supplied as the value of the TMTRACE environment variable. The trace specification was ignored. |
Action |
Provide a legal string for the trace specification. | |
See Also |
| |
1435 |
WARN: Invalid regular expression in trace specification (receiver); ignored | |
|
Description |
A syntactically incorrect regular expression was supplied as part of the receiver-spec in the trace specification string. The regular expression was ignored; consequently, all trace points that passed the filter were emitted to the receiver. |
Action |
Provide a legal regular expression in the receiver-spec. | |
See Also |
| |
1438 |
WARN: Trigger failed - system(status) | |
|
Description |
The execution of the trigger that was executed for a particular trace point failed. The trigger was specified in the trace specification. |
Action |
No action required. | |
See Also |
| |
1439 |
WARN: Invalid regular expression in trace specification (trigger); ignored | |
|
Description |
A syntactically incorrect regular expression was supplied as part of the trigger-spec in the trace specification string. The regular expression was ignored; consequently, the trigger was executed for all trace points that passed the filter. |
Action |
Provide a legal regular expression in the trigger-spec. | |
See Also |
| |
1440 |
ERROR: Invalid trace trigger; ignored | |
|
Description |
The action (for example, |
Action |
Provide a valid trigger action in the trace specification. | |
See Also |
| |
1441 |
ERROR: tpcommit message failure, check GTT | |
|
Description |
This message is issued when the system encounters an error trying to receive the reply to a request sent to a TMS to complete a transaction. The message is typically issued when a system-level failure occurs. |
Action |
See the userlog for more information about this transaction's completion and about any communication error that may have occurred. Also, use | |
See Also |
| |
1461 |
ERROR: Could not advertise servicename. Specify all functions at buildserver time. | |
|
Description |
All functions that can handle service name associations must be specified at buildserver time. This can be done using the |
Action |
Add all functions that can be dynamically associated with a service name to the | |
1463 |
ERROR: Error parsing -s option. | |
|
Description |
The |
Action |
See the | |
1465 |
INFO: Duplicate advertisement of service servicename (func functionname) ignored. | |
|
Description |
The given association between servicename and functionname has already been advertised. Duplicates are ignored. |
Action |
In order to eliminate this message, remove the duplicate service advertisement from either the | |
1466 |
WARN: Overriding service servicename (func functionname) mapping given at buildserver time. | |
|
Description |
An association between a servicename and a functionname given at buildserver time has been overridden by the |
Action |
The | |
1467 |
WARN: Skipping recursive export file. | |
|
Description |
The |
Action |
Remove any lines from filename which begin with the @ character. | |
1468 |
WARN: Could not open file filename. | |
|
Description |
The file specified on the |
Action |
Make sure that the given filename exists. One useful trick is to specify filename as a full path name, rather than a relative path name. | |
1469 |
ERROR: Error while parsing file filename. | |
|
Description |
The server was parsing the given filename. While parsing the file given via the |
Action |
Edit the file specified by the | |
1470 |
WARN: Function functionname not specified at buildserver time. servicename will not be advertised. | |
|
Description |
All functions that can handle service name associations must be specified at buildserver time. This can be done using the |
Action |
Add all functions that can be dynamically associated with a service name to the | |
1471 |
ERROR: Memory allocation failure. | |
|
Description |
While attempting to create a table for service advertisements, the system ran out of memory. |
Action |
Check the memory of the system. If it appears that there should be enough memory to run this server, then contact the BEA TUXEDO system Technical Support. | |
1472 |
WARN: Function name must be <= number characters in length; functionname will be truncated | |
|
Description |
Function names are restricted in length. If a given function name is longer than this maximum length, then that function name will be truncated. |
Action |
Shorten the length of the function name. | |
1473 |
WARN: Service name must be <= number characters in length; servicename will be truncated | |
|
Description |
Service names are restricted in length. If a given service name is longer than this maximum length, then that service name will be truncated. |
Action |
Shorten the length of the service name. | |
1475 |
ERROR: .SysServerCleaning: servername, group srvgrp, id srvid server cleaning | |
|
Description |
This message indicates that the server specified above died abnormally and the BBL cleaned up the slot allocated by the server. |
Action |
Debug the server and fix the problem before it is restarted again. | |
See Also |
| |
1476 |
ERROR: .SysServerRestarting: servername, group srvgrp, id srvid server restarting | |
|
Description |
This message indicates that the server specified above died abnormally; and since this has been marked as a restartable server, it has been restarted. This message is also printed during normal migration of the DBBL from the master to the backup. |
Action |
BEA TUXEDO application servers should not ordinarily die abnormally. This error is most likely due to an application-specific problem. Debug the server and resolve the problem before restarting the server again. If it occurs for the DBBL during migration, it can be ignored. | |
See Also |
| |
1477 |
ERROR: .SysServerDied: servername, group srvgrp, id srvid server died | |
|
Description |
This message indicates that the server specified above died abnormally and the BBL detected this condition in its periodic scan of the BB. |
Action |
Debug the server and fix the problem before it is restarted again. | |
See Also |
| |
1478 |
ERROR: .SysServerInit: servername, group srvgrp, id srvid server initialization failure | |
|
Description |
This message indicates that the server specified above failed in |
Action |
Fix the problem and then reboot the server. The problem can be due to a BEA TUXEDO resource limit or an application-specific problem. | |
See Also |
| |
1479 |
ERROR: .SysServerTpexit: servername, group srvgrp, id srvid server requested TPEXIT | |
|
Description |
This message indicates that the server specified above received a request, and the service routine code did a |
Action |
This is an informational message. | |
See Also |
| |
1480 |
ERROR: .SysServerMaxgen: servername, group srvgrp, id srvid server exceeded MAXGEN LIMIT | |
|
Description |
This message indicates that the server specified above died abnormally; and since this has been marked as a restartable server, it has been restarted |
Action |
BEA TUXEDO application servers should not ordinarily die abnormally. This error is most likely due to an application-specific problem. Debug the server and resolve the problem before restarting the server again. | |
See Also |
| |
1481 |
WARN: .SysClientDied: User usrname on LMID client died | |
|
Description |
This message indicates that the client specified above exited the application without doing a |
Action |
This is an informational message. | |
See Also |
| |
1482 |
INFO: .SysClientState: User usrname on LMID state change to state | |
|
Description |
This message indicates that the client specified above changed to a new state. A complete listing of the current attributes of the client are sent in the posted buffer. |
Action |
This is an informational message. | |
See Also |
| |
1483 |
INFO: .SysClientState: User usrname on LMID state change to state | |
|
Description |
This message indicates that the client specified above changed to a new state. A complete listing of the current attributes of the client are sent in the posted buffer. |
Action |
This is an informational message. | |
See Also |
| |
1484 |
WARN: .SysClientSecurity: User usrname on LMID authentication failure | |
|
Description |
This message indicates that the client specified above failed security validation when trying to join the application. A complete listing of the current attributes of the client are sent in the posted buffer. |
Action |
Check to make sure that this is not some hacker trying to gain access to your application data. | |
See Also |
| |
1485 |
ERROR: .SysNetworkDropped: LMID1->LMID2 connection dropped | |
|
Description |
This message indicates that the network link between the two machines specified was dropped abnormally. A complete listing of the current parameters are sent along in the posted buffer. |
Action |
This can happen either because the BRIDGE on either machine died or one of the machines crashed. | |
See Also |
| |
1486 |
ERROR: .SysNetworkFailure: LMID1->LMID2 connection failure | |
|
Description |
This message indicates that the BRIDGE process on LMID1 could not make a network connection to the BRIDGE process on LMID2. A complete listing of the current parameters are sent along in the posted buffer. |
Action |
This can happen either because the BRIDGE on the remote machine died or the remote machine itself crashed. | |
See Also |
| |
1488 |
WARN: .SysMachineFullMaxconv: LMID capacity limit | |
|
Description |
This message indicates that the given LMID reached the capacity limit on the number of concurrent conversations. A complete listing of the current parameters for the given LMID are sent along in the posted buffer. |
Action |
Increase the value of MAXCONV for the particular machine such that this event is not generated. | |
See Also |
| |
1489 |
WARN: .SysMachineFullMaxgtt: LMID capacity limit | |
|
Description |
This message indicates that the given LMID reached the capacity limit on the number of concurrent transactions. A complete listing of the current parameters for the given LMID are sent along in the posted buffer. |
Action |
Increase the value of MAXGTT for the particular machine such that this event is not generated. | |
See Also |
| |
1490 |
WARN: .SysMachineFullMaxwsclients: LMID capacity limit | |
|
Description |
This message indicates that the given LMID reached the capacity limit on the number of workstation clients. A complete listing of the current parameters for the given LMID are sent along in the posted buffer. |
Action |
Increase the value of MAXWSCLIENTS for the particular machine such that this event is not generated. | |
See Also |
| |
1491 |
WARN: .SysMachineFullMaxaccessers: LMID capacity limit | |
|
Description |
This message indicates that the given LMID reached the capacity limit on the number of accessers. A complete listing of the current parameters for the given LMID are sent along in the posted buffer. |
Action |
Increase the MAXACCESSERS for the particular machine or, if the hardware/software limits have been reached for the maximum number of users on the machine, move additional users to other machines. | |
See Also |
| |
1492 |
ERROR: .SysMachinePartitioned: LMID is partitioned | |
|
Description |
This message indicates that the DBBL partitioned the stated machine either because the BBL on the machine is slow or the network link between the master and the machine is broken. |
Action |
This can be caused due to various reasons, the first one being that the entire network is bogged down due to heavy traffic. The second is that the BBL or BRIDGE on the non-master is either dead or slow. The third is that the BRIDGE process on the non-master is extremely busy. The software is capable of unpartitioning the machine if things stabilize. | |
See Also |
| |
1494 |
INFO: .SysNetworkFlow: LMID1->LMID2 flow control | |
|
Description |
While sending a message on the network, flow control has been detected. Machine parameters for both machines are sent along in the posted buffer. |
Action |
This is usually caused by heavy network traffic. No action required. | |
See Also |
| |
1495 |
INFO: .SysMachineUnpartitioned: LMID is unpartitioned | |
|
Description |
A machine that was partitioned (see message 1492) is again available to service requests. |
Action |
No action required. | |
See Also |
| |
1496 |
WARN: .SysMachineSlow: machine slow responding to DBBL | |
|
Description |
The BBL on machine sends an "I'm OK" message to the DBBL every time it performs a sanity check of its machine. This check occurs every "SANITYSCAN * SCANUNIT" seconds, as specified in the RESOURCES section. Similarly, every |
Action |
This message indicates that there may be network congestion or an overload on machine. There is a risk that machine will become partitioned.
| |
See Also |
| |
1497 |
WARN: .SysMachineMsgq: LMID message queue blocking | |
|
Description |
This message indicates that the server posting a message encountered a blocking condition while putting a message on the message queue. A complete listing of the machine parameters are sent along in the posted buffer. |
Action |
Configure larger message queues and/or distribute the load equally on all the machines. | |
See Also |
| |
1498 |
WARN: .SysMachineBroadcast: LMID broadcast delivery failure | |
|
Description |
This message indicates that |
Action |
Since the broadcast messages are sent in no-blocking mode, it is possible that the process doing the broadcasting encountered a blocking condition and dropped a message. Configure larger message queues and/or load-balance clients/servers such that excessive load is not put on some machines. | |
See Also |
| |
1499 |
ERROR: Unable to update security version number. | |
|
Description |
While updating one of the administrative security files, the version number could not be updated. This will cause a potential inconsistency between multiple active machines in the application. |
Action |
Attempt to update the security information (users, groups, ACLs) again. If the message persists, shut down and re-boot the application, which will re-propagate the security files. | |
See Also |
|
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|