![]() |
![]() |
|
|
1509 |
ERROR: failed to get shared memory, errno = errno_number | |
|
Description |
A server attempted to create the shared memory used for the ACL cache and failed. |
Action |
Check the configuration of shared memory on the system where the failure occurred. Increase the parameters to allow for more shared memory. The requirements can be reduced by setting MAXACLGROUPS and MAXACLCACHE lower. | |
See Also |
| |
1510 |
ERROR: failed to attach to shared memory, errno = errno_number | |
|
Description |
A server attempted to attach to the shared memory used for the ACL cache and failed. |
Action |
Check the configuration of shared memory on the system where the failure occurred. Increase the parameters to allow for more shared memory. The requirements can be reduced by setting MAXACLGROUPS and MAXACLCACHE lower. | |
See Also |
| |
1511 |
WARN: [Semaphore appears stuck - currently held by pid] | |
|
Description |
While trying to lock a portion of the queue space (using a user-level semaphore), the process is unable to get the lock for a long period. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
1512 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1513 |
WARN: Unable to cleanup security files. | |
|
Description |
When the security files are updated, modified and deleted entries are not immediately deleted. Occasionally, these entries are cleaned up and one of these attempts failed. |
Action |
No action required. The files will be cleaned up at a later time. This warning usually occurs when a cleanup was attempted when update activity was heavy. | |
1514 |
ERROR: Out of ACL cache entries. | |
|
Description |
When checking an access control list, the ACL cache ran out of entries. A permissions violation will be returned to the application. |
Action |
Change the application configuration to allow for more entries in the cache (MAXACLCACHE which is set on a per-machine basis). | |
See Also |
| |
1515 |
WARN: Access control violation - user uid on LMID tried to access type name | |
|
Description |
A client attempted to access a service, event, or queue for which it was not granted access via an access control list. The user identifier (configured in the user or principal file), the machine, entity type, and entity name are printed. |
Action |
No action required. The access fails with an error and an event is generated. Further action may be required on the part of the security administrator. | |
See Also |
| |
1516 |
INFO: .SysACLPerm: User uid on LMID tried to access type name | |
|
Description |
This is the event that is generated when a client has attempted to access a service, event, or queue for which it was not granted access via an access control list. The user identifier (configured in the user or principal file), the machine, entity type, and entity name are printed. |
Action |
No action required. The access fails with an error and an event is generated. Further action may be required on the part of the security administrator. | |
See Also |
| |
1517 |
INFO: .SysMachineState: LMID state change to INACTIVE | |
|
Description |
The specified machine changed to a new state of INACTIVE. A complete listing of the current parameters are sent along in the posted buffer. |
Action |
This is an informational message. | |
See Also |
| |
1518 |
INFO: .SysServerState: servername, group srvgrp, id srvid state change to state | |
|
Description |
This message indicates that the server specified above changed to a new state. A complete listing of the server attributes are sent in the posted buffer. |
Action |
This is an informational message. | |
See Also |
| |
1519 |
ERROR: TUXCONFIG value (val) is longer than the allowed length of len | |
|
Description |
The value specified in the |
Action |
Correct the value of your environment variable. | |
See Also |
| |
1520 |
ERROR: .SysTransactionHeuristicCommit: Transaction gtrid in group grpno | |
|
Description |
This message indicates that the database in the group specified above performed a heuristic commit on the transaction indicated in the message. |
Action |
Check to make sure that the coordinator of the transaction is still up and running. | |
See Also |
| |
1521 |
ERROR: .SysTransactionHeuristicAbort: Transaction gtrid in group grpno | |
|
Description |
This message indicates that the database in the group specified above performed a heuristic abort on the transaction indicated in the message. |
Action |
Check to make sure that the coordinator of the transaction is still up and running. | |
See Also |
| |
1523 |
ERROR: Unable to get APPDIR environment variable. | |
|
Description |
While reading the ACL information, the program was unable to get the APPDIR environment variable. |
Action |
Normally, this variable is automatically set for both clients and servers based on the application configuration. Call BEA TUXEDO System Technical Support. Support. | |
1524 |
WARN: Cannot set high priority for 'sub' | |
|
Description |
On the Windows NT platform, the program was unable to set the priority class to HIGH_PRIORITY. |
Action |
No action required. | |
1530 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system failed while trying to send a transaction message. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1531 |
ERROR: Type switch buffer uninitialization routine failure | |
|
Description |
While receiving a message and freeing up a buffer, the buffer uninitialization function, |
Action |
Check the buffer type switch to see that it is correctly set up (that the right uninitialization function is associated with the correct buffer type). If an application-defined buffer type, check the uninitialization function to see that it is coded correctly. | |
See Also |
| |
1532 |
ERROR: Type switch buffer uninitialization routine failure | |
|
Description |
While freeing up a buffer in |
Action |
Check the buffer type switch to see that it is correctly set up (that the right uninitialization function is associated with the correct buffer type). If an application-defined buffer type, check the uninitialization function to see that it is coded correctly. | |
See Also |
| |
1533 |
ERROR: Type switch buffer uninitialization routine failure | |
|
Description |
While freeing up a buffer in |
Action |
Check the buffer type switch to see that it is correctly set up (that the right uninitialization function is associated with the correct buffer type). If an application-defined buffer type, check the uninitialization function to see that it is coded correctly. | |
See Also |
| |
1534 |
ERROR: Type switch buffer uninitialization routine failure | |
|
Description |
While freeing up a buffer in |
Action |
Check the buffer type switch to see that it is correctly set up (that the right uninitialization function is associated with the correct buffer type). If an application-defined buffer type, check the uninitialization function to see that it is coded correctly. | |
See Also |
| |
1535 |
ERROR: Invalid Group-id to open RM | |
|
Description |
|
Action |
Don't call | |
See Also |
| |
1536 |
ERROR: Invalid Group-id to close RM | |
|
Description |
|
Action |
Do not call | |
See Also |
| |
1537 |
ERROR: tpclose called with ongoing transaction | |
|
Description |
|
Action |
The transaction must be completed via | |
See Also |
| |
1538 |
WARN: Could not lock Bulletin Board | |
|
Description |
The program was unable to get access to the BEA TUXEDO Bulletin Board (BB) within a reasonable amount of processing, due to race conditions with other processes trying to lock the BB. The associated operation will fail. |
Action |
This should not occur often, if at all. It occurs during a high level of concurrent access by many processes. Re-try the operation. | |
1539 |
ERROR: Error getting Group Environment filename | |
|
Description |
While booting a server, the associated group entry could not be found so any group environment file will not be processed. |
Action |
This indicates a problem in opening or reading the application configuration. Look for other messages in the event log indicating the problem. | |
See Also |
| |
1540 |
ERROR: Error putting ENVFILE filename into environment | |
|
Description |
In the process of booting a server or starting a client, the ENVFILE specified in the GROUPS section of the configuration could not be accessed. The server will still be booted or the client will be started but the environment will not be modified. |
Action |
Check the group environment file to see that it exists in the correct directory with the right name and with read permission. It may be necessary to shutdown the client or server and re-start it with the correct environment. | |
See Also |
| |
1541 |
WARN: Invalid server pool option -p argument | |
|
Description |
The given argument is in an invalid format. |
Action |
The format for the -p[L][ Reformat argument to comply with the format for | |
See Also |
| |
1544 |
ERROR: The -p option is valid only for MSSQ servers | |
|
Description |
In order to use the server pool option -p, the server must be in an MSSQ set where MAX is greater than 1. |
Action |
Remove the -p option from the CLOPT for the affected server. Make sure the server is in an MSSQ set by supplying a RQADDR for the server in the | |
See Also |
| |
1545 |
ERROR: Invalid -p values lw,tt:hw,ct | |
|
Description |
One of the values lw, tt, hw, or ct is incorrect. |
Action |
The format for the -p[L][ Reformat argument to comply with the format for | |
See Also |
| |
1546 |
ERROR: Cannot lock Bulletin Board | |
|
Description |
While testing the server pool, an error occurred while attempting to lock the bulletin board. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
1547 |
ERROR: Fatal error receiving requests, shutting server down | |
|
Description |
The system detected a fatal error during the reception on incoming service requests. |
Action |
This message is supplied when the server has found a condition which does not allow the server to continue operation. The most common causes are lack of memory and corrupted memory, but other conditions could also cause this behavior. The server will shut itself down. If you believe that your system has enough memory and that the memory in the server has not been corrupted, contact your BEA TUXEDO system Technical Support. | |
1548 |
ERROR: Unable to send unsolicited message to process (pid) | |
|
Description |
While sending an unsolicited message to process pid, an error occurred. |
Action |
The most common cause of this error message is that the recipient of the unsolicited message has died. Check to see if pid is still running, and if it is, contact your BEA TUXEDO system Technical Support. | |
1549 |
ERROR: Invalid USIGNAL parameter in Bulletin Board | |
|
Description |
While sending an unsolicited message, an invalid value of USIGNAL was found. |
Action |
If the NOTIFY option in the RESOURCES section of the UBBCONFIG file is SIGNAL, then USIGNAL must be SIGUSR1 or SIGUSR2. Other values are not recognized by the BEA TUXEDO system. Contact your BEA TUXEDO system Technical Support. | |
1550 |
ERROR: Unable to send signal to process, pid = pid | |
|
Description |
NOTIFY was set to SIGNAL, but while sending an unsolicited message to the process with process id pid, we could not properly signal the process. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
1551 |
ERROR: Cannot find DBBL | |
|
Description |
While sending an unsolicited message to a process on a remote machine, the system encountered an error while attempting to find the DBBL. |
Action |
This may be a temporary failure, or a failure caused by a partitioned application. If the application is partitioned, then unsolicited messages may not work properly. If your application is not partitioned, contact your BEA TUXEDO system Technical Support. | |
1552 |
ERROR: Cannot perform operation, DBBL is migrating | |
|
Description |
While sending an unsolicited message to a process on a remote machine, the system discovered that the DBBL was migrating. |
Action |
During master migration, unsolicited messages may not be sent. Retry the operation when the DBBL is not migrating. | |
1553 |
ERROR: Unable to find WSH (pid) | |
|
Description |
While sending an unsolicited message to a workstation client, the system could not find the corresponding workstation handler. |
Action |
Unsolicited messages to workstation clients pass through the workstation handler. An error occurs if the workstation handler for a given client cannot be found. Contact your BEA TUXEDO system Technical Support. | |
1554 |
ERROR: WSH (pid) should not be ignoring unsolicited messages | |
|
Description |
While sending an unsolicited message to a workstation client, the system found that the workstation handler was in an invalid state. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
1555 |
ERROR: Unsolicited message encoding/decoding failed (routine) | |
|
Description |
While encoding or decoding an unsolicited message, an error occurred. |
Action |
The value in routine will give the name of the function which failed during the encoding and decoding procedure. Contact your BEA TUXEDO system Technical Support with the values from routine. | |
1556 |
ERROR: Cannot receive TPACK because MSSQ is specified but REPLYQ is N | |
|
Description |
In order to receive acknowledgment of delivery of an unsolicited message from a server in an MSSQ set, the REPLYQ parameter of that server must be set to Y. |
Action |
Change the value of REPLYQ for the affected server to Y in the | |
1557 |
ERROR: Memory allocation failure reason | |
|
Description |
While attempting to encode or decode an unsolicited message the system ran out of memory. |
Action |
Check the memory on the affected system. If it seems that there should be enough memory for this operation, contact your BEA TUXEDO system Technical Support. | |
1558 |
ERROR: Cannot create call descriptor for unsolicited message, tperrno=tperrno | |
|
Description |
While generating a descriptor handle for an unsolicited message, an error occurred with tperrno tperrno. |
Action |
Check the memory on the affected system. If it seems that there should be enough memory for this operation, contact your BEA TUXEDO system Technical Support. | |
1559 |
ERROR: Failed to receive ACK for unsolicited message, tperrno=tperrno | |
|
Description |
While waiting for acknowledgment of receipt of an unsolicited message, an error occurred with tperrno tperrno. |
Action |
The recipient of the unsolicited message may or may not have received the unsolicited message. Examine tperrno for more information on the cause of the failure. | |
1560 |
ERROR: Failed to cancel unsolicited message call descriptor, tperrno=tperrno | |
|
Description |
If an error occurs while getting an acknowledgment from tpnotify, the system attempts to tpcancel the request. If the tpcancel fails, then this message will appear. |
Action |
The recipient of the unsolicited message may or may not have received the unsolicited message. Examine tperrno for more information on the cause of the failure. Contact your BEA TUXEDO system Technical Support. | |
1561 |
ERROR: Failed to send ACK to notifier, tperrno=tperrno | |
|
Description |
The process which received an acknowledged notification event was unable to return the acknowledgment. |
Action |
Examine tperrno for more information on the cause of the failure. Contact your BEA TUXEDO system Technical Support. | |
1562 |
WARN: Unable to open MACHINE ENVFILE envfile for reading | |
|
Description |
The as400 machine could not open envfile for reading. |
Action |
Make sure envfile exists and that the process has sufficient permission for reading the file. | |
1564 |
ERROR: Unable to determine license level | |
|
Description |
An error occurred while retrieving the current license attributes. |
Action |
Check the log for prior messages indicating the cause of the problem. Normally, it means that the product has not been licensed properly. | |
1565 |
ERROR: Application attempted to start a transaction but transactions are not licensed | |
|
Description |
You do not have a license to use TUXEDO System/T transactions. |
Action |
Purchase a license for TUXEDO System/T transactions. | |
1566 |
ERROR: Unable to set type switch index | |
|
Description |
An attempt to check a buffer type or subtype failed during a call to |
Action |
Check that the type and/or subtype is listed in the file | |
1572 |
ERROR: Bad conversational sequence number | |
|
Description |
Conversations are sequenced in order to provide protection. One of the conversational messages arrived out of order. The conversation has been disconnected, and if a transaction was active, it has been set to the |
Action |
Look at the userlog to determine whether or not the BRIDGE has given up sending any messages to a message queue. If it has, the operating system may need to be tuned to properly handle a high volume of messages. This problem may also be alleviated by using compression. This error may also occur when the BRIDGE is failing over to a new network link or failing back to an high priority link. | |
1576 |
INFO: Command line domainid identification disabled | |
|
Description |
The |
Action |
Contact your BEA TUXEDO system Technical Support. | |
1577 |
ERROR: Service service not available in group group | |
|
Description |
This error is occurring in the _froute32 function for FML32. The service to which this buffer has been routed does not exist in the group. |
Action |
Ensure that the routing criteria in the UBBCONFIG file is correct. | |
1581 |
WARN: pid=pid has no registry table slot - BB lock freed | |
|
Description |
The BEA TUXEDO system was in the process of cleaning up a registry slot for a process pid. However, the process has exited concurrently with the cleanup attempt, so there is no entry to cleanup. |
Action |
No user action is required. | |
1582 |
ERROR: Invalid -p values lw,tt:hw,ct | |
|
Description |
One of the values lw, tt, hw, or ct is incorrect. |
Action |
The format for the -p[L][ Reformat argument to comply with the format for | |
See Also |
| |
1583 |
ERROR: Cannot lock Bulletin Board | |
|
Description |
While testing the server pool, an error occurred while attempting to lock the bulletin board. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
|
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|