[Next]

---

3. LIBTMIB Messages 200-299

---

200	ERROR: Class instance specification is not unique
	Description	The specification given for a new or modified class was not unique.
	Action	Ensure that the class specification presented to the MIB is unique.
203	ERROR: Unable to mark invalid record for principal principal.
	Description	When marking an entry as invalid in the principal file, an error writing the principal file occurred. This error can occur when deleting a principal from the T_ACLPRINCIPAL class. This error usually occurs because of disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
204	ERROR: Could not find principal.
	Description	The principal which the T_ACLPRINCIPAL MIB is attempting to delete has already been deleted. This error can only occur if two or more administrators are attempting to delete a principal at the same time.
	Action	Make sure that only one person is accessing the ACL MIB at any one time. You can use the MIB to see if the principal in question has been properly removed.
205	ERROR: Unable to append to file filename.
	Description	While attempting to open a file, an error occurred. This error happens when using the T_ACLPRINCIPAL class
	Action	There are several kernel parameters which could cause this error. Two obvious ones include the maximum allowed size for files and the number of allowable open file descriptors. Disk space could also be a problem. Increase the appropriate kernel parameters or buy a new disk, then try the command again.
207	ERROR: Unable to mark invalid record for principal name.
	Description	While modifying a principal in the T_ACLPRINCIPAL class, an error occurred when removing the old principal entry. This error is usually due to disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
212	ERROR: Unable to mark invalid record.
	Description	When marking an entry as invalid in the group file, an error writing the group file occurred. This error can occur when deleting a group from the T_ACLGROUP class. This error usually occurs because of disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
213	ERROR: Could not find group.
	Description	The group which the T_ACLGROUP MIB is attempting to delete has already been deleted. This error can only occur if two or more administrators are attempting to delete a group at the same time.
	Action	Make sure that only one person is accessing the ACL MIB at any one time. You can use the MIB to see if the principal in question has been properly removed.
214	ERROR: Unable to append to file filename.
	Description	While attempting to open the given file, an error occurred. This happens when updating the T_ACLGROUP class.
	Action	There are several kernel parameters which could cause this error. Two obvious ones include the maximum allowed size for files and the number of allowable open file descriptors. Disk space could also be a problem. Increase the appropriate kernel parameters or buy a new disk, then try the command again.
217	ERROR: Unable to mark invalid record.
	Description	When marking an entry as invalid in the group file, an error writing the group file occurred. This error can occur when modifying a group from the T_ACLGROUP class. This error usually occurs because of disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
219	ERROR: Unable to change attributes of the other group.
	Description	The other group is a group that always exists and which cannot be altered.
	Action	Do not attempt to alter the other group.
220	ERROR: Unable to change state of the other group.
	Description	The other group is a group that always exists and which cannot be altered. Hence this group cannot be removed.
	Action	Do not attempt to remove the other group.
222	ERROR: Unable to append to file filename.
	Description	While attempting to open the given file, an error occurred. This happens when updating the T_ACLPERM class.
	Action	There are several kernel parameters which could cause this error. Two obvious ones include the maximum allowed size for files and the number of allowable open file descriptors. Disk space could also be a problem. Increase the appropriate kernel parameters or buy a new disk, then try the command again.
224	ERROR: Unable to mark invalid record.
	Description	When marking an entry as invalid in the access file, an error writing the access file occurred. This error can occur when deleting a permission from the T_ACLPERM class. This error usually occurs because of disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
226	ERROR: Unable to find the end of the acl file.
	Description	When attempting to find the end of the acl file, an error occurred.
	Action	There are several kernel parameters which could cause this error. Two obvious ones include the maximum allowed size for files and the number of allowable open file descriptors. Disk space could also be a problem. Increase the appropriate kernel parameters or buy a new disk, then try the command again.
227	ERROR: Unable to mark invalid record.
	Description	When marking an entry as invalid in the access file, an error writing the access file occurred. This error can occur when modifying a permission in the T_ACLPERM class. This error usually occurs because of disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
229	ERROR: Unable to print in the principal file.
	Description	While attempting to write into the principal file, an error occurred. This error is usually caused by disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
230	ERROR: Missing key field(s) in /Admin service request
	Description	One or more required key fields is missing from an /AdminAPI request. The identifier of the first missing key field is supplied in the TA_BADFLD attribute in the reply buffer.
	Action	Using APPQ_MIB(5), determine which key fields are required, then supply the missing field(s).
	See Also	MIB(5), APPQ_MIB(5)
231	ERROR: Inappropriate key field(s) for /Admin service request for unconfigured application
	Description	The TA_LMID attribute was specified in an /AdminAPI request for a T_APPQ, T_APPQMSG, T_APPQSPACE, or T_APPQTRANS object but the application is not configured (i.e., the TUXCONFIG environment variable is not defined). Because the application is not configured, there are no known logical machine identifiers, and specifying the TA_LMID attribute is inappropriate.
	Action	Resubmit the /AdminAPI request, but omit the TA_LMID attribute from the request.
	See Also	MIB(5), APPQ_MIB(5)
232	ERROR: TA_MIN is greater than TA_MAX
	Description	A SET operation on a T_SERVER class object set the TA_MIN value greater than the new, existing, or default TA_MAX value.
	Action	Correct the values of TA_MIN and/or TA_MAX and re-try the operation.
	See Also	MIB(5), TM_MIB(5)
233	ERROR: TA_SRVID plus TA_MAX yields server identifier greater than 30,000
	Description	A SET operation on a T_SERVER class object set the TA_SRVID and TA_MAX values such that their sum is greater than 30,000. Server identifiers must be less than or equal to 30,000.
	Action	Correct the values of TA_SRVID and/or TA_MAX and re-try the operation.
	See Also	MIB(5), TM_MIB(5)
234	ERROR: TA_LMID value does not match local machine
	Description	The TA_LMID value specified on an /AdminAPI SET request for a T_DEVICE object does not match the configured logical machine identifier for the local machine.
	Action	Correct the /AdminAPI request to use the local logical machine identifier.
	See Also	MIB(5), TM_MIB(5)
235	INFO: .SysResourceConfig: system configuration change
	Description	This message indicates that parameters in the T_DOMAIN class have been updated. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
236	ERROR: SET operation did not specify required key field
	Description	If a class contains any key fields necessary for a SET, then at least one of these fields must be present in a the SET buffer. This requirement protects against the case of a class which has one and only one instance, and the SET buffer contains no fields at all (matching the one instance). This one instance may or may not be a proper match for the required action.
	Action	Add one of the required SET keys to the input buffer such that the SET keys match one and only one instance of the class. Rerun the request against the MIB.
237	ERROR: Unable to add to the access control file.
	Description	When modifying the T_ACLPERM class, an error occurred when writing the access control list file. This error is usually caused by disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
240	INFO: .SysMachineConfig: LMID configuration change
	Description	This message indicates that parameters in the T_MACHINE class for the given LMID have been updated. A complete listing of the current parameters for the given LMID are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
243	ERROR: TA_LMID value does not match local machine
	Description	The TA_LMID value specified on an /AdminAPI SET request for a T_APPQ, T_APPQMSG, T_APPQSPACE, or T_APPQTRANS object does not match the configured logical machine identifier for the local machine.
	Action	Resubmit the /AdminAPI request and use the correct logical machine identifier.
	See Also	MIB(5), APPQ_MIB(5)
245	ERROR: There are no more valid group identifiers
	Description	Group identifiers can only be in the range 0 through 16383. If all group identifiers have been used, then it is impossible to add a new group to the system.
	Action	Remove a group, then add a new group.
246	ERROR: There are no more valid user identifiers
	Description	User identifiers can only be in the range 1 through 131,071. If all user identifiers have been used, then it is impossible to add a new user to the system.
	Action	Remove a user, then add a new user.
248	INFO: .SysMachineState: LMID state change to state
	Description	This message states that the specified machine changed to a new state as mentioned in the message. A complete listing of the current parameters are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
249	INFO: .SysServerConfig: servername, group srvgrp, id srvid configuration change
	Description	This message indicates that the configuration parameters for the server specified above have been updated. A complete listing of the attributes of the server are sent along in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
250	INFO: .SysServerState: servername, group srvgrp, id srvid state change to state
	Description	This message indicates that the server specified above changed to a new state. A complete listing of the server attributes are sent in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
251	INFO: .SysClientState: User usrname on LMID state change to state
	Description	This message indicates that the client specified above changed to a new state. A complete listing of the current attributes of the client are sent in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
252	INFO: .SysGroupState: Group groupname on lmid state change to state
	Description	This message indicates that the group specified above changed to a new state. A complete listing of the group attributes are sent in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
253	INFO: .SysClientConfig: User usrname on LMID configuration change
	Description	This message indicates that the attributes on the client specified above have been changed. A complete listing of the current attributes of the client are sent in the posted buffer.
	Action	This is an informational message.
	See Also	EVENT_MIB(5), TM_MIB(5)
254	ERROR: Required field not present on SET request
	Description	The field indicated by TA_BADFLD is required for the current /AdminAPI request and was not present.
	Action	Regenerate the request using an appropriate value for the indicated field.
	See Also	MIB(5), TM_MIB(5)
255	ERROR: Class only valid on security levels greater than APP_PW.
	Description	This class is only valid if the security level in the ubbconfig(5) is set to USER_AUTH, ACL, or MANDATORY_ACL.
	Action	Change the SECURITY level in your ubbconfig(5) to USER_AUTH, ACL, or MANDATORY_ACL. Then run tmloadcf(1) on your new ubbconfig file.
256	ERROR: Unable to seek in group file.
	Description	While attempting to manipulate the file position indicator in the group file, an error occurred. This error is usually caused by disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
257	ERROR: Unable to print in group file.
	Description	While attempting to write into the group file, an error occurred. This error is usually caused by disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
258	ERROR: Unable to seek in principal file.
	Description	While attempting to manipulate the file position indicator in the principal file, an error occurred. This error is usually caused by disk corruption.
	Action	Run a diagnostic on the disk to see whether the disk is corrupted. If it is corrupted, buy a new disk and run the command again. If it is not, then contact BEA TUXEDO system Technical Support.
260	ERROR: Cannot create NEW T_DOMAIN in MP/LAN mode without networking information
	Description	A SET TA_STATE NEW /AdminAPI request on the T_DOMAIN class attempted to create a networked application (MP model, LAN option) without specifying required networking addresses.
	Action	Regenerate the request specifying the required networking addresses.
	See Also	MIB(5), TM_MIB(5)
261	ERROR: Inconsistent user attributes detected
	Description	While looking at the access control cache an inconsistent entry was found in the shared memory.
	Action	If this error happens consistently, contact your BEA TUXEDO system Technical Support.
262	ERROR: T_WSL creation conflicts with existing server
	Description	An attempt was made to create a T_WSL object which already exists with the MIB. The TA_SRVGRP and TA_SRVID of the new object match an existing object.
	Action	Change the TA_SRVGRP or TA_SRVID attributes of the new WSL, so that it does not clash with an existing server or T_WSL object.
263	ERROR: Server group name does not match existing group
	Description	While attempting to create a new service group, the TA_SRVGRP field did not match an existing server group,
	Action	The TA_SRVGRP field must match an existing server group upon creation of a service group. Either create the missing server group before attempting to create the service group, or change the TA_SRVGRP field to match and existing server group.
264	INFO: Restarting server at alternate location
	Description	A server has been migrated to a new location
	Action	None.
265	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process during a pclean operation.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough file descriptors and disk space for this operation, contact your BEA TUXEDO system Technical Support.
266	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process during a pclean operation.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
267	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process while setting a server state to DEAD.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full.
268	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process while setting a server state to DEAD.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
269	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process while setting a server group state to INACTIVE.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full.
270	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process while setting a server group state to INACTIVE.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
271	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process while migrating a group.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full.
272	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process while migrating a group.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
273	ERROR: sbbl_rtn could not send reply error-code
	Description	The sbbl process could not send a reply to the requestor.
	Action	The code in error-code may provide clues as to the cause of this problem.
274	ERROR: Failed to get information on the migrating server group
	Description	A tpcall to the MIB from the sbbl process did not complete successfully.
	Action	Check the log for related messages.
275	ERROR: Failed to get information on the service group
	Description	A tpcall to the MIB from the sbbl process did not complete successfully.
	Action	Check the log for related messages.
276	ERROR: TA_MINENCRYPTBITS(min) must be less than or equal to TA_MAXENCRYPTBITS(max)
	Description	An attempt has been made to change the TA_MINENCRYPTBITS field in the T_WSL class to a value greater than TA_MAXENCRYPTBITS.
	Action	The value of min must be less than or equal to the value of max. Change the MIB request to comply with this requirement. You may need to change the command line options -z or -Z on the CLOPT line of your WSL process.
277	ERROR: TA_MINENCRYPTBITS(min) must be less than or equal to TA_MAXENCRYPTBITS(max)
	Description	An attempt has been made to change the TA_MINENCRYPTBITS field in the T_MACHINE class to a value greater than TA_MAXENCRYPTBITS.
	Action	The value of min must be less than or equal to the value of max. Change the MIB request to comply with this requirement. You may need to change the value of MINENCRYPTBITS or MAXENCRYPTBITS in your ubbconfig file.
278	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process while getting information from an application queue space.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full.
279	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process while getting information from an application queue space.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
280	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process while getting information from an application queue.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full.
281	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process while getting information from an application queue.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
282	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process while getting information about a message on an application queue.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full.
283	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process while getting information about a message on an application queue.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
284	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process while getting information about a transaction on an application queue.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full.
285	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process while getting information about a transaction on an application queue.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
286	ERROR: Cannot open file
	Description	The MIB has failed to open a file to pass to the sbbl process while setting information about an application queue.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full.
287	ERROR: Cannot write to file
	Description	The MIB has failed to write to a file for the sbbl process while setting information about an application queue.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full.
288	ERROR: can't SET Internet type of network address(es).
	Description	Internet addresses cannot be used in a configuration which contains releases older than the BEA TUXEDO system 6.3 release.
	Action	Since older sites cannot properly interpret internet addresses, internet addresses cannot be used when interoperating with a release of the BEA TUXEDO system older than 6.3. Change the address in the MIB request packet to conform to the older style of network addressing.
289	ERROR: Unable to determine license level
	Description	An attempt to determine the license information for the BEA TUXEDO system failed.
	Action	Check the log for related messages. Ensure that the BEA TUXEDO system has been properly installed and licensed.
290	ERROR: SET operation is not allowed on ADMGRP server
	Description	An attempt was made to perform a SET operation on a T_SERVER class object which has TA_GRPNO larger than 30,000.
	Action	No action required.
	See Also	TM_MIB(5)
291	ERROR: Cannot change own state to DEAD
	Description	A SET operation on a T_CLIENT class object changing the TA_STATE of the object to DEAD failed because the client id of the requesting client was equal to the client id of the client to be killed.
	Action	Make sure that the client id you specify is not your own.
292	ERROR: Cannot change own state to SUSPENDED
	Description	A SET operation on a T_CLIENT class object changing the TA_STATE of the object to SUSPENDED failed because the client id of the requesting client was equal to the client id of the client to be suspended.
	Action	Make sure that the client id you specify is not your own.

---

---