[Top] [Prev] [Next] [Bottom]

4. LIBWSC Messages 1500-1599

1500	ERROR: Memory allocation error
	Description	An attempt dynamically to allocate memory from the operating system failed while decompressing a received message.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1501	ERROR: Memory allocation error
	Description	An attempt dynamically to allocate memory from the operating system failed while compressing a message.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1502	ERROR: Invalid buffer error_info
	Description	An invalid buffer was passed to `tpfree`. The buffer must be allocated with `tpalloc`.
Action	Modify the application so that a valid typed buffer is used.
See Also	`tpalloc`(3c), `tpfree`(3c)
1503	ERROR: Memory allocation failure error_info
	Description	An attempt dynamically to allocate memory from the operating system failed while decoding a received message. Additional information about the problem is printed as part of the message.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1504	ERROR: Invalid buffer error_info
	Description	An invalid buffer was received by the Workstation client.
Action	This error should not occur. Contact BEA TUXEDO system Technical Support.
1505	ERROR: Type switch uninitialization failure
	Description	While processing a received message in the client, the buffer uninitialization function, `_tmuninitbuf`, returned an error.
Action	Check the buffer type switch to see that it is correctly set up (that the right uninitialization function is associated with the correct buffer type). If an application-defined buffer type, check the uninitialization function to see that it is coded correctly.
See Also	`buffer`(3c), `typesw`(5)
1507	*ERROR: MINENCRYPTBITS (minval) is greater than 0*
	Description	The minimum number of encryption bits was greater than zero, but there is no link level encryption add-on package installed on this machine.
Action	Install the link level encryption package or change the minimum encryption bits to be zero. The minimum encryption strength can be changed with the environment variable `TMMINENCRYPTBITS` on workstation clients.
1508	*ERROR: MINENCRYPTBITS (minval) is greater than 40*
	Description	The minimum number of encryption bits was greater than 40, but only the 40-bit link level encryption add-on package is installed on this machine.
Action	Install the 128-bit link level encryption package or change the minimum encryption bits to be 0 or 40. The minimum encryption strength can be changed with the environment variable `TMMINENCRYPTBITS` on workstation clients.
1509	ERROR: Encryption negotiation failure
	Description	The workstation client and the workstation listener could not agree on an encryption strength.
Action	When workstation clients log into the system, they negotiate an encryption strength with the workstation listener. If the client and listener cannot agree on the level of encryption (for example, if the workstation listener demands 128-bit encryption and the client can only speak 40-bits encryption) then this message will appear. The administrator can change the encryption policy of either the workstation listener or the workstation client.
1510	ERROR: Memory allocation error
	Description	A workstation client ran out of memory while attempting a Diffie-Hellman exchange.
Action	Check the memory on the system where the workstation handler resides. If it seems that there should be enough memory for this operation, contact your BEA TUXEDO system Technical Support.
1511	ERROR: Unable to allocate encryption handle
	Description	While negotiating the Diffie-Hellman parameters, the workstation client had an error while attempting to get an encryption handle.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1512	ERROR: Unable to generate first diffie-hellman packet
	Description	While negotiating the Diffie-Hellman parameters, the workstation client had an error while attempting to generate the initial Diffie-Hellman parameters.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1513	ERROR: Unable to send first diffie-hellman packet
	Description	While negotiating the Diffie-Hellman parameters, the workstation client had an error while attempting to send the initial Diffie-Hellman parameters to the workstation handler.
Action	The network may have experienced an error, or the handler waiting for the security packet may have been killed. If neither of these events has occurred, contact your BEA TUXEDO system Technical Support.
1514	ERROR: Memory allocation error
	Description	A workstation client ran out of memory while attempting a Diffie-Hellman exchange.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1515	ERROR: Did not get diffie-hellman return package
	Description	The workstation client did not receive the expected reply from the handler.
Action	Monitor your network for malicious use. Contact your TUXEDO System/T Technical Support.
1516	ERROR: Diffie-hellman return packet is bad
	Description	The return packet from the network was corrupted or invalid.
Action	Monitor your network for malicious use. Contact your TUXEDO System/T Technical Support.
1517	ERROR: Encryption negotiation failure
	Description	The workstation client and the workstation listener could not agree on an encryption strength.
Action	When workstation clients log into the system, they negotiate an encryption strength with the workstation listener. If the client and listener cannot agree on the level of encryption (for example, if the workstation listener demands 128-bit encryption and the client can only speak 40-bits encryption) then this message will appear. The administrator can change the encryption policy of either the workstation listener or the workstation client.
1518	ERROR: Cannot create buffer - tpalloc() failed - errmsg
	Description	A memory allocation failure occurred in `tmconfig`.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1519	ERROR: tpcall() failed, tperrno
	Description	While `tmconfig` was processing a request, `tpcall` failed.
Action	Check the tperrno which the `tpcall` returned. Check the userlog to see if any more information is available. Contact your BEA TUXEDO system Technical Support.
1520	ERROR: Invalid network address
	Description	The `WSNADDR` environment variable was not in the correct format.
Action	Any address in the `WSNADDR` environment variable which begins with `//` must be a valid internet address. The following formats are recognized by the system: `//`host.name:port_number and `//`#`.`#`.`#`.`#`:`port_number. Other formats may be recognized. Change the `NADDR` field to comply with the known formats. If you believe that your address is in the proper format, contact your BEA TUXEDO system Technical Support.
1521	ERROR: Cannot put FIELDTBLS32 into environment
	Description	An error occurred while `tmconfig32` was setting the `FIELDTBLS32` variable.
Action	Contact your TUXEDO System/T Technical Support.
1522	ERROR: Cannot put FLDTBLDIR32 into environment
	Description	An error occurred while `tmconfig32` was setting the `FLDTBLDIR32` variable.
Action	Contact your TUXEDO System/T Technical Support.
1524	ERROR: tprealloc for TPINIT failed - reason-code
	Description	`wud` or `wud32` could not resize the `TPINIT` buffer
Action	`wud` or `wud32` may attempt to resize the `TPINIT` buffer when there is more user authentication data than expected. reason-code may provide insight into the cause of this failure. Make sure enough memory exists on the system running `wud` or `wud32`. If it appears that there should be enough memory to `wud` or `wud32`, and this error happens consistently, then contact the BEA TUXEDO System Technical Support.
1526	ERROR: Network timeout occurred - connection dropped
	Description	The workstation client timed out while waiting for a reply. The connection has been dropped.
Action	The WSH may or may not be experiencing a large amount of traffic. If the network timeout is not set high enough to handle peak load of the system, this error may occur prematurely. Ensure that the network timeout, if set, is tuned to handle peak load cases.
1527	ERROR: Cannot use Multi-context feature in /WS client
	Description	The `TPMULTICONTEXTS` flag was set in `tpinit`, but this TUXEDO System/T binary does not handle multiple thread contexts.
Action	Either buy the TUXEDO System/T threads package or do not use the `TPMULITCONTEXTS` flag to `tpinit`.

[Top] [Prev]