![]() |
![]() |
e-docs > WebLogic Server > Programming WebLogic JNDI > Programming with WebLogic JNDI |
Programming WebLogic JNDI
|
Programming with WebLogic JNDI
The following sections describe programming with WebLogic JNDI including:
Using WebLogic JNDI from a Java Client
The WebLogic Server JNDI Service Provider Interface (SPI) provides an InitialContext implementation that allows remote Java clients to connect to WebLogic Server. The client can specify standard JNDI environment properties that identify a particular WebLogic Server deployment and related connection properties for logging in to WebLogic Server.
To participate in a session with WebLogic Server, a Java client must be able to get an object reference for a remote object and invoke operations on the object. To accomplish this, the client application code must perform the following procedure:
The following sections discuss JNDI client operations for connecting to a specific WebLogic Server. For information about using JNDI in a cluster of WebLogic Servers, seeUsing WebLogic JNDI from a Client in a Clustered Environment.
Before you can use JNDI to access an object in a WebLogic Server environment, you must load the object into the WebLogic Server JNDI tree. For instructions on loading objects in the JNDI tree, see Managing JNDI.
Note: Binding objects built with WebLogic Server 6.1 classes and deploying them to WebLogic Server 7.0 or higher is not supported and can result in failures during startup.
Setting Up JNDI Environment Properties for the InitialContext
The first task that must be performed by any Java client application is to create environment properties. The InitialContext factory uses various properties to customize the InitialContext for a specific environment. You can set these properties either by using a hash table or the set() method of a WebLogic Environment object. These properties, which are specified name-to-value pairs, determine how the WLInitialContextFactory creates the Context.
The following properties are used to customize the InitialContext:
Note: For initial context requests over T3, using default channel, Context.PROVIDER_URL may be the IP address of a load balancer.
You can use the same properties on either a client or a server. If you define the properties on a server-side object, a local Context is used. If you define the properties on a client or another WebLogic Server, the Context delegates to a remote Context running on the WebLogic Server specified by the Context.PROVIDER_URL property.
There are some properties that cannot be changed after the creation of the context. These properties include provider url, user credentials, and factories. AddToEnvironment can be used to change other properties after the creation of the context.
Listing 2-1 shows how to obtain a Context using the properties Context.INITIAL_CONTEXT_FACTORY and Context.PROVIDER_URL.
Listing 2-1 Obtaining a Context
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://localhost:7001");
try {
ctx = new InitialContext(ht);
// Use the context in your program
}
catch (NamingException e) {
// a failure occurred
}
finally {
try {ctx.close();}
catch (Exception e) {
// a failure occurred
}
}
Additional WebLogic-specific properties are also available for configuring security parameters and controlling how objects are bound into the cluster-wide JNDI tree. Note that bindings may or may not be replicated across the JNDI tree of each server within the cluster. Properties such as these are identified by constants in the weblogic.jndi.WLContext class. For more information about JNDI-related clustering issues, see Using WebLogic JNDI from a Client in a Clustered Environment.
Creating a Context Using a Hash Table
You can create a Context with a hash table in which you have specified the properties described in Setting Up JNDI Environment Properties for the InitialContext
To do so, pass the hash table to the constructor for InitialContext. The property java.naming.factory.initial is used to specify how the InitialContext is created. To use WebLogic JNDI, you must always set the java.naming.factory.initial property to weblogic.jndi.WLInitialContextFactory. This setting identifies the factory that actually creates the Context.
Creating a Context Using a WebLogic Environment Object
You can also create a Context by using a WebLogic environment object implemented by the weblogic.jndi.environment interface. Although the environment object is WebLogic-specific, it offers the following advantages:
The WebLogic Environment object provides the following defaults:
If you want to create InitialContext with these defaults, write the following code:
Environment env = new Environment();
Context ctx = env.getInitialContext();
If you want to set only a WebLogic Server to a Distributed Name Service (DNS) name for client cluster access, write the following code:
Environment env = new Environment();
env.setProviderURL("t3://myweblogiccluster.com:7001");
Context ctx = env.getInitialContext();
Note: Every time you create a new JNDI environment object, you are creating a new security scope. This security scope ends with a context.close() method.
The environment.getInitialContext() method does not work correctly with the IIOP protocol.
Listing 2-2 illustrates using a JNDI Environment object to create a security context.
Listing 2-2 Creating a Security Context with a JNDI Environment Object
weblogic.jndi.Environment environment = new weblogic.jndi.Environment();
env.setInitialContextFactory(
weblogic.jndi.Environment.DEFAULT_INITIAL_CONTEXT_FACTORY);
env.setProviderURL("t3://bross:4441");
env.setSecurityPrincipal("guest");
env.setSecurityCrendentials("guest");
Hashtable props = env.getProperties();
InitialContext ctx = new InitialContext(props);
Creating a Context from a Server-Side Object
You may also need to create a Context from an object (an Enterprise JavaBean (EJB) or Remote Method Invocation (RMI) object) that is instantiated in the Java Virtual Machine (JVM) of WebLogic Server. When using a server-side object, you do not need to specify the Context.PROVIDER_URL property. Usernames and passwords are required only if you want to sign in as a specific User. Server-side contexts run in the context of WebLogic Server.
To create a Context from within a server-side object, you first must create a new InitialContext, as follows:
Context ctx = new InitialContext();
You do not need to specify a factory or a provider URL. By default, the context is created as a Context and is connected to the local naming service.
When you create a JNDI Context with a username and password, you associate a user with a thread. When the Context is created, the user is pushed onto the context stack associated with the thread. Before starting a new Context on the thread, you must close the first Context so that the first user is no longer associated with the thread. Otherwise, users are pushed down in the stack each time a new context created. This is not an efficient use of resources and may result in the incorrect user being returned by ctx.lookup() calls. This scenario is illustrated by the following steps:
Note: There are two situations where a close() call does not remove the current user from the stack and this can cause JNDI context problems. For information on how to avoid JNDI context problems, see How to Avoid Potential JNDI Context Problems.
How to Avoid Potential JNDI Context Problems
While issuing a close() call usually behaves as described in JNDI Contexts and Threads. However, there are two exceptions to expected behavior:
When using protocols other than IIOP, the first user is "sticky" in the sense that it becomes the default user when no other user is present. This scenario is described in the following steps:
Since ctx1 was the first user, the current identity stays set to user1 after step 4. Note that not only is user1 the current user on this thread, it is the current user on all threads that do not have another identity defined. Thus, user1 becomes the default user when no other user identity is present. This is not good practice as any subsequent logins that do not have a username and credential will be granted the identify of user1 by default.
To work around this problem, implement one of the following options:
Listing 2-3 JNDI Context and Threads Wrapper Code
import java.security.PrivilegedAction;
import javax.security.auth.Subject;
import weblogic.security.Security;
public class client
{
public static void main(String[] args)
{
Security.runAs(new Subject(),
new PrivilegedAction() {
public Object run() {
//
//If implementing in client code, main() goes here.
//
return null;
}
});
}
}
Note: If you choose to use Option 3, be advised of how non-privileged users relate to the users and everyone groups, which are configured by default in the security realm in this release of WebLogic Server. The users and everyone groups are convenience groups that allow you to apply global roles and security policies. By default, all WebLogic Server users, including non-privileged users, are members of the everyone group, but non-privileged users are not members of the users group.
When using IIOP, an exception to expected behavior arises when there is one Context on the stack and that Context is removed by a close(). The identity of the last context removed from the stack determines the current identity of the user. This scenario is described in the following steps:
Using the Context to Look Up a Named Object
Every Java client application must obtain an initial object that provides services for the application. An object cannot not be looked up, however, unless it is loaded in the WebLogic Server namespace. For more information, see Managing JNDI in the Administration Guide.
The lookup() method on the Context is used to obtain named objects. The argument passed to the lookup() method is a string that contains the name of the desired object. Listing 2-4 shows how to retrieve an EJB named ServiceBean.
Listing 2-4 Looking Up a Named Object
try {
ServiceBean bean = (ServiceBean)ctx.lookup("ejb.serviceBean");
}
catch (NameNotFoundException e) {
// binding does not exist
}
catch (NamingException e) {
// a failure occurred
}
Using a Named Object to Get an Object Reference
EJB client applications get object references to EJB remote objects from EJB Homes. RMI client applications get object references to other RMI objects from an initial named object. Both initial named remote objects are known to WebLogic Server as factories. A factory is any object that can return a reference to another object that is in the WebLogic namespace.
The client application invokes a method on a factory to obtain a reference to a remote object of a specific class. The client application then invokes methods on the remote object, passing any required arguments.
Listing 2-5 contains a code fragment that obtains a remote object and then invokes a method on it.
Listing 2-5 Using a Named Object to Get an Object Reference
ServiceBean bean = ServiceBean.Home.create("ejb.ServiceBean")
Servicebean.additem(66);
After clients finish working with a Context, BEA Systems recommends that the client close the Context in order to release resources and avoid memory leaks. BEA recommends that you use a finally{} block and wrap the close() method in a try{} block. If you attempt to close a context that was never instantiated because of an error, the Java client application throws an exception.
In Listing 2-6, the client closes the context, releasing the resource being used.
Listing 2-6 Closing the Context
try {
ctx.close();
} catch (Exception e) {
//a failure occurred
}
Using WebLogic JNDI in a Clustered Environment
The intent of WebLogic JNDI is to provide a naming service for J2EE services, specifically EJB, RMI, and Java Messaging Service (JMS). Therefore, it is important to understand the implications of binding an object to the JNDI tree in a clustered environment.
The following sections discuss how WebLogic JNDI is implemented in a clustered environment and offer some approaches you can take to make your own objects available to JNDI clients.
WebLogic RMI is the enabling technology that allows clients in one JVM to access EJBs and JMS services from a client in another JVM. RMI stubs marshal incoming calls from the client to the RMI object. To make J2EE services available to a client, WebLogic binds an RMI stub for a particular service into its JNDI tree under a particular name. The RMI stub is updated with the location of other instances of the RMI object as the instances are deployed to other servers in the cluster. If a server within the cluster fails, the RMI stubs in the other server's JNDI tree are updated to reflect the server failure.
When a client connects to a cluster, it is actually connecting to one of the WebLogic Servers already in the cluster. Because the JNDI tree for this WebLogic Server contains the RMI stubs for all services offered by the other WebLogic Servers in the cluster in addition to its own services, the cluster appears to the client as one WebLogic Server hosting all of the cluster-wide services. When a new WebLogic Server joins a cluster, each WebLogic Server already in the cluster is responsible for sharing information about its own services to the new WebLogic Server. With the information collected from all the other servers in the cluster, the new server may create its own copy of the cluster-wide JNDI tree.
RMI stubs significantly affect how WebLogic JNDI is implemented in a clustered environment:
Making Custom Objects Available to a WebLogic Server Cluster
When you bind a custom object (a non-RMI object) into a JNDI tree in a WebLogic Server cluster, the object is replicated across all the servers in the cluster. However, if the host server goes down, the custom object is removed from the cluster's JNDI tree. Custom objects are not replicated unless the custom object is bound again. You need to unbind and rebind a custom object every time you want to propagate changes made to the custom object. Therefore, WebLogic JNDI should not be used as a distributed object cache. You can use a third-party solution with WebLogic Server to provide distributed caches.
Suppose the custom object needs to be accessed only by EJBs that are deployed on only one WebLogic Server. Obviously it is unnecessary to replicate this custom object throughout all the WebLogic Servers in the cluster. In fact, you should avoid replicating the custom object in order to avoid any performance degradation due to unnecessary server-to-server communication. To create a binding that is not replicated across WebLogic Servers in a cluster, you must specify the REPLICATE_BINDINGS property when creating the context that binds the custom object to the namespace. Listing 2-7 illustrates the use of the REPLICATE_BINDINGS property.
Listing 2-7 Using the REPLICATE_BINDINGS Property
Hashtable ht = new Hashtable();
//turn off binding replication
ht.put(WLContext.REPLICATE_BINDINGS, "false");
try {
Context ctx = new InitialContext(ht);
//bind the object
ctx.bind("my_object", MyObect);
} catch (NamingException ne) {
//failure occured
}
When you are using this technique and you need to use the custom object, you must explicitly obtain an InitialContext for the WebLogic Server. If you connect to any other WebLogic Server in the cluster, the binding does not appear in the JNDI tree.
If you need a custom object accessible from any WebLogic Server in the cluster, deploy the custom object on each WebLogic Server in the cluster without replicating the JNDI bindings.
When using WebLogic JNDI to replicate bindings, the bound object will be handled as if it is owned by the host WebLogic Server. If the host WebLogic Server fails, the custom object is removed from all the JNDI trees of all WebLogic Servers in the cluster. This behavior can have an adverse effect on the availability of the custom object.
Note: You can not use a / or - character in a JNDI Context.bind(String Name). If the Binding name string contains a / or - character, a javax.naming.NameNotFoundException is raised.
A common task in Web applications is to cache data used by multiple objects for a period of time to avoid the overhead associated with data computation or connecting to another service.
Suppose you have designed a custom data caching object that performs well on a single WebLogic Server and you would like to use this same object within a WebLogic cluster. If you bind the data caching object in the JNDI tree of one of the WebLogic Servers, WebLogic JNDI will, by default, copy the object to each of the other WebLogic Servers in the cluster. It is important to note that since this is not an RMI object, what you are binding into the JNDI tree (and copying to the other WebLogic Servers) is the object itself, not a stub that refers to a single instance of the object hosted on one of the WebLogic Servers. Do not assume from the fact that WebLogic Server copies a custom object between servers that custom objects can be used as a distributed cache. Remember the custom object is removed from the cluster if the WebLogic Server to which it was bound fails and changes to the customer object are not propagated through the cluster unless the object is unbound and rebound to the JNDI tree.
For the sake of performance and availability, it is often desirable to avoid using WebLogic JNDI's binding replication to copy large custom objects with high availability requirements to all of the WebLogic Servers in a cluster. As an alternative, you can deploy a separate instance of the custom object on each of the WebLogic Servers in the cluster. When binding the object to each WebLogic Server's JNDI tree, you should make sure to turn off binding replication as described in the Making Custom Objects Available to a WebLogic Server Cluster section. In this design pattern, each WebLogic Server has a copy of the custom object but you will avoid copying large amounts of data from server to server.
Regardless of which approach you use, each instance of the object should maintain its own logic for when it needs to refresh its cache independently of the other data cache objects in the cluster. For example, suppose a client accesses the data cache on one WebLogic Server. It is the first time the caching object has been accessed, so it computes or obtains the information and saves a copy of the information for future requests. Now suppose another client connects to the cluster to perform the same task as the first client only this time the connection is made to a different WebLogic Server in the cluster. If this the first time this particular data caching object has been accessed, it will need to compute the information regardless of whether other data caching objects in the cluster already have the information cached. Of course, for any future requests, this instance of the data cache object will be able to refer to the information it has saved.
Exactly-Once-Per-Cluster Design Pattern
In some cases, it is desirable to have a service that appears only once in the cluster. This is accomplished by deploying the service on one machine only. For RMI objects, you can use the default behavior of WebLogic JNDI to replicate the binding (the RMI stub) and the single instance of your object will be accessible from all WebLogic Servers in the cluster. This is referred to as a pinned service. For non-RMI objects, make sure that you use the REPLICATE_BINDINGS property when binding the object to the namespace. In this case, you will need to explicitly connect to the host WebLogic Server to access the object. Alternatively, you can create an RMI object that is deployed on the same host WebLogic Server that can act as a proxy for your non-RMI object. The stub for the proxy can be replicated (using the default WebLogic JNDI behavior) allowing clients connected to any WebLogic Server in the cluster to access the non-RMI object via the RMI proxy.
This design pattern for an exactly-once-per-cluster service presents an additional challenge for services with high availability requirements. Since the failover feature of WebLogic Clusters relies on having multiple deployments of each clustered service, failover for an exactly-once-per-cluster service will not be available. For services that require high availability, it is suggested that you implement a hardware, High-Availability (HA) framework for the host WebLogic Server. The framework allows WebLogic Server to be restarted in the event of a failure with a minimal amount of disruption to availability of the service.
Using WebLogic JNDI from a Client in a Clustered Environment
The JNDI binding for an object can appear in the JNDI tree for one WebLogic Server in the cluster, or it can be replicated to all the WebLogic Servers in the cluster. If the object of interest is bound in only one WebLogic Server, you must explicitly connect to the host WebLogic Server by setting the Context.PROVIDER_URL property to the host WebLogic Server's URL when creating the Initial Context, as described in Using WebLogic JNDI from a Java Client.
In most cases, however, the object of interest is either a clustered service or a pinned service. As a result, a stub for the service is displayed in the JNDI tree for each WebLogic Server in the cluster. In this case, the client does not need to name a specific WebLogic Server to provide its naming service. In fact, it is best for the client to simply request that a WebLogic Cluster provide a naming service, in which case the context factory in WebLogic Server can choose whichever WebLogic Server in the cluster seems most appropriate for the client. Currently, a naming service provider is chosen within WebLogic using DNS round-robining.
The context that is returned to a client of clustered services is, in general, implemented as a failover stub that can transparently change the naming service provider if a failure (such as a communication failure) with the selected WebLogic Server occurs.
Listing 2-8 shows how a client uses the cluster's naming service.
Listing 2-8 Using the Naming Service in a WebLogic Cluster
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL, "t3://acmeCluster:7001");
try {
Context ctx = new InitialContext(ht);
// Do the client's work
}
catch (NamingException ne) {
// A failure occurred
}
finally {
try {ctx.close();}
catch (Exception e) {
// a failure occurred
}
}
The hostname specified as part of the provider URL is the DNS name for the cluster that can be defined by the ClusterAddress setting in a Cluster stanza of the config.xml file. ClusterAddress maps to the list of hosts providing naming service in this cluster. For more information, see "Understanding Cluster Configuration and Application Deployment" in Using WebLogic Server Clusters..
In Listing 2-8, the cluster name acmeCluster is used to connect to any of the WebLogic Servers in the cluster. The resulting Context is replicated so that it can fail over transparently to any WebLogic Server in the cluster.
An alternative method of specifying the initial point of contact with the WebLogic Cluster is to supply a comma-delimited list of DNS Server names or IP addresses.
ht.put(Context.PROVIDER_URL,"t3://acme1,acme2,acme3:7001");
ht.put(Context.PROVIDER_URL,"t3://node1:7001,node2:7002,node3:7003");
When you use a DNS name which maps to multiple servers, WebLogic Server rilies on DNS for load balancing.
When you use a comma delimited list of DNS names for WebLogic Server nodes, failover is accomplished using the round-robin method, with the request going to a randomly chosen server until that server fails to respond, after which the request will go to the next server on the list. This will continue for each server that fails.
Once the client has gotten a context, no additional load balancing occurs unless there is a failure, in which case WebLogic Server will fail over to another node in the cluster.
A remote client will get the context from the first available server. A client that is local to a server in the cluster will never go to to a remote server for JNDI operations.
When you look up a stub, the first invocation of the stub will ordinarily go to the server from which you got the context. If the stub is clusterable, subsequent invocations will be load balanced based on the user defined load balancing policy.
For additional information about JNDI and Clusters see "Introduction to WebLogic Server Clustering"
![]() |
![]() |
![]() |
![]() |
||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |