Developing Security Providers for WebLogic Server
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Adjudication involves resolving any authorization conflicts that may occur when more than one Authorization provider is configured, by weighing the result of each Authorization provider's Access Decision. In WebLogic Server, an Adjudication provider is used to tally the results that multiple Access Decisions return, and determines the final PERMIT
or DENY
decision. An Adjudication provider may also specify what should be done when an answer of ABSTAIN
is returned from a single Authorization provider's Access Decision.
The following sections describe Adjudication provider concepts and functionality, and provide step-by-step instructions for developing a custom Adjudication provider:
The use of Adjudication providers is part of the authorization process, and is described in The Authorization Process.
The default (that is, active) security realm for WebLogic Server includes a WebLogic Adjudication provider. The WebLogic Adjudication provider is responsible for adjudicating between potentially differing results rendered by multiple Authorization providers' Access Decisions, and rendering a final verdict on whether or not access will be granted to a WebLogic resource.
The WebLogic Adjudication provider has an attribute called Require Unanimous Permit that governs its behavior. By default, the Require Unanimous Permit attribute is set to TRUE
, which causes the WebLogic Adjudication provider to act as follows:
PERMIT
, then return a final verdict of TRUE
(that is, permit access to the WebLogic resource).PERMIT
and others return ABSTAIN
, then return a final verdict of FALSE
(that is, deny access to the WebLogic resource).ABSTAIN
or DENY
, then return a final verdict of FALSE
(that is, deny access to the WebLogic resource).If you change the Require Unanimous Permit attribute to FALSE
, the WebLogic Adjudication provider acts as follows:
PERMIT
, then return a final verdict of TRUE
(that is, permit access to the WebLogic resource).PERMIT
and others return ABSTAIN
, then return a final verdict of TRUE
(that is, permit access to the WebLogic resource).DENY
, then return a final verdict of FALSE
(that is, deny access to the WebLogic resource).Note: You set the Require Unanimous Permit attributes when you configure the WebLogic Adjudication provider. For more information about configuring the WebLogic Adjudication provider, see Configuring a WebLogic Adjudication Provider in Managing WebLogic Security.
If you want an Adjudication provider that behaves in a way that is different from what is described above, then you need to develop a custom Adjudication provider. (Keep in mind that an Adjudication provider may also specify what should be done when an answer of ABSTAIN
is returned from a single Authorization provider's Access Decision, based on your specific security requirements.)
If the WebLogic Adjudication provider does not meet your needs, you can develop a custom Adjudication provider by following these steps:
Before you start creating runtime classes, you should first:
When you understand this information and have made your design decisions, create the runtime classes for your custom Adjudication provider by following these steps:
To implement the AdjudicationProvider
SSPI, provide implementations for the methods described in Understand the Purpose of the Provider SSPIs and the following method:
The getAdjudicator
method obtains the implementation of the Adjudicator
SSPI. For a single runtime class called MyAdjudicationProviderImpl
.java
, the implementation of the getAdjudicator
method would be:
If there are two runtime classes, then the implementation of the getAdjudicator
method could be:
This is because the runtime class that implements the AdjudicationProvider
SSPI is used as a factory to obtain classes that implement the Adjudicator
SSPI.
For more information about the AdjudicationProvider
SSPI and the getAdjudicator
method, see the WebLogic Server 8.1 API Reference Javadoc.
To implement the Adjudicator
SSPI, provide implementations for the following methods:
The initialize
method initializes the names of all the configured Authorization providers' Access Decisions that will be called to supply a result for the "is access allowed?" question. The accessDecisionClassNames
parameter may also be used by an Adjudication provider in its adjudicate
method to favor a result from a particular Access Decision. For more information about Authorization providers and Access Decisions, see Authorization Providers.
For more information about the Adjudicator
SSPI and the initialize
and adjudicate
methods, see the WebLogic Server 8.1 API Reference Javadoc.
Before you start generating an MBean type for your custom security provider, you should first:
When you understand this information and have made your design decisions, create the MBean type for your custom Adjudication provider by following these steps:
Notes: Several sample security providers (available under Code Samples: WebLogic Server on the dev2dev Web site) illustrate how to perform these steps.
All instructions provided in this section assume that you are working in a Windows environment.
To create an MBean Definition File (MDF), follow these steps:
Note: The MDF for the sample Authentication provider is called SampleAuthenticator.xml
. (There is currently no sample Adjudication provider.)
<MBeanType>
and <MBeanAttribute>
elements in your MDF so that they are appropriate for your custom Adjudication provider. Note: A complete reference of MDF element syntax is available in MBean Definition File (MDF) Element Syntax.
Once you create your MDF, you are ready to run it through the WebLogic MBeanMaker. The WebLogic MBeanMaker is currently a command-line utility that takes as its input an MDF, and outputs some intermediate Java files, including an MBean interface, an MBean implementation, and an associated MBean information file. Together, these intermediate files form the MBean type for your custom security provider.
The instructions for generating an MBean type differ based on the design of your custom Adjudication provider. Follow the instructions that are appropriate to your situation:
If the MDF for your custom Adjudication provider does not include any custom operations, follow these steps:
WL_HOME\server\lib\weblogic.jar
WL_HOME\server\lib\mbeantypes\wlManagement.jar
JAVA_HOME\..\lib\tools.jar
-Dfiles
flagjava -DMDF=
xmlfile -Dfiles=
filesdir -DcreateStubs=true weblogic.management.commo.WebLogicMBeanMaker
where the -DMDF
flag indicates that the WebLogic MBeanMaker should translate the MDF into code, xmlFile is the MDF (the XML MBean Description File) and filesdir is the location where the WebLogic MBeanMaker will place the intermediate files for the MBean type.
Copy WL_HOME\server\lib\commo.dtd
to the same directory as the xml file specified by the -DMDF
flag.
Whenever xmlfile is provided, a new set of output files is generated.
Each time you use the -DcreateStubs=true
flag, it overwrites any existing MBean implementation file.
Note: The WebLogic MBeanMaker processes one MDF at a time. Therefore, you may have to repeat this process if you have multiple MDFs (in other words, multiple Adjudication providers).
If the MDF for your custom Adjudication provider does include custom operations, consider the following:
WL_HOME\server\lib\weblogic.jar
WL_HOME\server\lib\mbeantypes\wlManagement.jar
JAVA_HOME\..\lib\tools.jar
-Dfiles
flagjava -DMDF=
xmlfile -Dfiles=
filesdir -DcreateStubs=true weblogic.management.commo.WebLogicMBeanMaker
where the -DMDF
flag indicates that the WebLogic MBeanMaker should translate the MDF into code, xmlFile is the MDF (the XML MBean Description File) and filesdir is the location where the WebLogic MBeanMaker will place the intermediate files for the MBean type.
Copy WL_HOME\server\lib\commo.dtd
to the same directory as the xml file specified by the -DMDF
flag.
Whenever xmlfile is provided, a new set of output files is generated.
Each time you use the -DcreateStubs=true
flag, it overwrites any existing MBean implementation file.
Note: The WebLogic MBeanMaker processes one MDF at a time. Therefore, you may have to repeat this process if you have multiple MDFs (in other words, multiple Adjudication providers).
WL_HOME\server\lib\weblogic.jar
WL_HOME\server\lib\mbeantypes\wlManagement.jar
JAVA_HOME\..\lib\tools.jar
-Dfiles
flagjava -DMDF=
xmlfile -Dfiles=
filesdir -DcreateStubs=true weblogic.management.commo.WebLogicMBeanMaker
where the -DMDF
flag indicates that the WebLogic MBeanMaker should translate the MDF into code, xmlFile is the MDF (the XML MBean Description File) and filesdir is the location where the WebLogic MBeanMaker will place the intermediate files for the MBean type.
Copy WL_HOME\server\lib\commo.dtd
to the same directory as the xml file specified by the -DMDF
flag.
Whenever xmlfile is provided, a new set of output files is generated.
Each time you use the -DcreateStubs=true
flag, it overwrites any existing MBean implementation file.
Note: The WebLogic MBeanMaker processes one MDF at a time. Therefore, you may have to repeat this process if you have multiple MDFs (in other words, multiple Adjudication providers).
The MBean interface file is the client-side API to the MBean that your runtime class or your MBean implementation will use to obtain configuration data. It is typically used in the initialize method as described in Understand the Purpose of the Provider SSPIs.
Because the WebLogic MBeanMaker generates MBean types from the MDF you created, the generated MBean interface file will have the name of the MDF, plus the text "MBean" appended to it. For example, the result of running the MyAdjudicator
MDF through the WebLogic MBeanMaker will yield an MBean interface file called MyAdjudicatorMBean.java
.
Once your have run your MDF through the WebLogic MBeanMaker to generate your intermediate files, and you have edited the MBean implementation file to supply implementations for the appropriate methods within it, you need to package the MBean files and the runtime classes for the custom Adjudication provider into an MBean JAR File (MJF). The WebLogic MBeanMaker also automates this process.
To create an MJF for your custom Adjudication provider, follow these steps:
WL_HOME\server\lib\weblogic.jar
WL_HOME\server\lib\mbeantypes\wlManagement.jar
JAVA_HOME\..\lib\tools.jar
-Dfiles
flagjava -DMJF=
jarfile -Dfiles=
filesdir weblogic.management.commo.WebLogicMBeanMaker
where the -DMJF
flag indicates that the WebLogic MBeanMaker should build a JAR file containing the new MBean types, jarfile is the name for the MJF and filesdir is the location where the WebLogic MBeanMaker looks for the files to JAR into the MJF.
Compilation occurs at this point, so errors are possible. If jarfile is provided, and no errors occur, an MJF is created with the specified name.
Notes: If you want to update an existing MJF, simply delete the MJF and regenerate it. The WebLogic MBeanMaker also has a -DIncludeSource
option, which controls whether source files are included into the resulting MJF. Source files include both the generated source and the MDF itself. The default is false
. This option is ignored when -DMJF
is not used.
The resulting MJF can be installed into your WebLogic Server environment, or distributed to your customers for installation into their WebLogic Server environments.
To install an MBean type into the WebLogic Server environment, copy the MJF into the WL_HOME\server\lib\mbeantypes
directory, where WL_HOME is the top-level installation directory for WebLogic Server. This "deploys" your custom Adjudication provider—that is, it makes the custom Adjudication provider manageable from the WebLogic Server Administration Console.
Note: WL_HOME\server\lib\mbeantypes
is the default directory for installing MBean types. However, if you want WebLogic Server to look for MBean types in additional directories, use the -Dweblogic.alternateTypesDirectory=
<dir> command-line flag when starting your server, where <dir> is a comma-separated list of directory names. When you use this flag, WebLogic Server will always load MBean types from WL_HOME\server\lib\mbeantypes
first, then will look in the additional directories and load all valid archives present in those directories (regardless of their extension). For example, if -Dweblogic.alternateTypesDirectory = dirX,dirY
, WebLogic Server will first load MBean types from WL_HOME\server\lib\mbeantypes
, then any valid archives present in dirX
and dirY
. If you instruct WebLogic Server to look in additional directories for MBean types and are using the Java Security Manager, you must also update the weblogic.policy
file to grant appropriate permissions for the MBean type (and thus, the custom security provider). For more information, see Using the Java Security Manager to Protect WebLogic Resources in Programming WebLogic Security.
You can create instances of the MBean type by configuring your custom Adjudication provider (see Configure the Custom Adjudication Provider Using the Administration Console), and then use those MBean instances from a GUI, from other Java code, or from APIs. For example, you can use the WebLogic Server Administration Console to get and set attributes and invoke operations, or you can develop other Java objects that instantiate MBeans and automatically respond to information that the MBeans supply. We recommend that you back up these MBean instances. For more information, see Backing Up Configuration and Security Data under "Recovering Failed Servers" in Configuring and Managing WebLogic Server.
Configuring a custom Adjudication provider means that you are adding the custom Adjudication provider to your security realm, where it can be accessed by applications requiring adjudication services.
Configuring custom security providers is an administrative task, but it is a task that may also be performed by developers of custom security providers. The steps for configuring a custom Adjudication provider using the WebLogic Server Administration Console are described under Configuring a Custom Security Provider in Managing WebLogic Security.
![]() ![]() |
![]() |
![]() |