Group Base DN |
No description provided.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.GroupBaseDN
Changes take effect after you redeploy the module or restart the server.
|
User Name Attribute |
No description provided.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.UserNameAttribute
Changes take effect after you redeploy the module or restart the server.
|
Results Time Limit |
The maximum number of milliseconds for the LDAP server to wait for
results before timing out. If this attribute is set to 0, there is no
maximum time limit.
MBean Attribute:
LDAPServerMBean.ResultsTimeLimit
Changes take effect after you redeploy the module or restart the server.
|
Dynamic Member URL Attribute |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.DynamicMemberURLAttribute
Changes take effect after you redeploy the module or restart the server.
|
Parallel Connect Delay |
The delay in seconds when making concurrent attempts to connect to
multiple LDAP servers. If this attribute is set to 0, connection
attempts are serialized. An attempt is made to connect to the first
server in the list. The next entry in the list is tried only if the
attempt to connect to the current host fails. If this attribute is not
set and an LDAP server is unavailable, an application may be blocked
for a long time. If this attribute is greater than 0, another
connection is started after the specified time.
MBean Attribute:
LDAPServerMBean.ParallelConnectDelay
Changes take effect after you redeploy the module or restart the server.
|
Static Group Object Class |
No description provided.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.StaticGroupObjectClass
Changes take effect after you redeploy the module or restart the server.
|
Ignore Duplicate Membership |
No description provided.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.IgnoreDuplicateMembership
Changes take effect after you redeploy the module or restart the server.
|
Follow Referrals |
Specifies that a search for a user or group within the Active
Directory Authentication provider will follow referrals to other LDAP
servers or branches within the LDAP directory. By default, this
attribute is enabled.
MBean Attribute:
LDAPServerMBean.FollowReferrals
Changes take effect after you redeploy the module or restart the server.
|
Port |
The port number on which the Active Directory LDAP server is
listening.
MBean Attribute:
LDAPServerMBean.Port
Minimum value: 1
Maximum value: 65534
Changes take effect after you redeploy the module or restart the server.
|
User Base DN |
No description provided.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.UserBaseDN
Changes take effect after you redeploy the module or restart the server.
|
Propagate Cause For Login Exception |
Specifies whether the providers should propagate the cause of the
LoginException.
MBean Attribute:
LoginExceptionPropagatorMBean.PropagateCauseForLoginException
Changes take effect after you redeploy the module or restart the server.
|
Credential Encrypted |
The credential (generally a password) used to authenticate the LDAP
user that is defined in the Principal attribute
MBean Attribute:
LDAPServerMBean.CredentialEncrypted
Changes take effect after you redeploy the module or restart the server.
|
Group Search Scope |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.GroupSearchScope
Changes take effect after you redeploy the module or restart the server.
|
User Object Class |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.UserObjectClass
Changes take effect after you redeploy the module or restart the server.
|
All Groups Filter |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.AllGroupsFilter
Changes take effect after you redeploy the module or restart the server.
|
Connection Retry Limit |
Specifies the number of times to attempt to connect to the LDAP
server if the initial connection failed.
MBean Attribute:
LDAPServerMBean.ConnectionRetryLimit
Changes take effect after you redeploy the module or restart the server.
|
SSLEnabled |
Specifies whether the SSL protocol should be used when connecting
to the Active Directory LDAP server.
MBean Attribute:
LDAPServerMBean.SSLEnabled
Changes take effect after you redeploy the module or restart the server.
|
User Dynamic Group DN Attribute |
If such an attribute does not exist, WebLogic Server determines if
a user is a member of a group by evaluating the URLs on the dynamic
group. If a group contains other groups, WebLogic Server evaluates the
URLs on any of the descendants (indicates parent relationship) of the
group.
MBean Attribute:
LDAPAuthenticatorMBean.UserDynamicGroupDNAttribute
Changes take effect after you redeploy the module or restart the server.
|
Static Group Name Attribute |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.StaticGroupNameAttribute
Changes take effect after you redeploy the module or restart the server.
|
Dynamic Group Object Class |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.DynamicGroupObjectClass
Changes take effect after you redeploy the module or restart the server.
|
Connect Timeout |
The maximum time in seconds to wait for the connection to the LDAP
server to be established. If this attribute is set to 0, there is not
a maximum time limit.
MBean Attribute:
LDAPServerMBean.ConnectTimeout
Changes take effect after you redeploy the module or restart the server.
|
Principal |
The Distinguished Name (DN) of the Active Directory LDAP user that
WebLogic Server should use to connect to the Active Directory LDAP
server.
MBean Attribute:
LDAPServerMBean.Principal
Changes take effect after you redeploy the module or restart the server.
|
User Search Scope |
Specifies how deep in the LDAP directory tree the Active Directory
Authentication provider should search for users.
Valid values are subtree and
onelevel .
MBean Attribute:
LDAPAuthenticatorMBean.UserSearchScope
Changes take effect after you redeploy the module or restart the server.
|
Dynamic Group Name Attribute |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.DynamicGroupNameAttribute
Changes take effect after you redeploy the module or restart the server.
|
Use Retrieved User Name as Principal |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.UseRetrievedUserNameAsPrincipal
Changes take effect after you redeploy the module or restart the server.
|
Host |
The host name or IP address of the Active Directory LDAP
server.
MBean Attribute:
LDAPServerMBean.Host
Changes take effect after you redeploy the module or restart the server.
|
Credential |
The credential (usually a password) used to connect to the Active
Directory LDAP server.
If this password has not been set, WebLogic Server generates a
password at startup, initializes the attribute, and saves the
configuration to the config.xml file. If you want to connect to the
embedded LDAP server using an external LDAP browser and the embedded
LDAP administrator account (cn=Admin), change this attribute from the
generated value.
MBean Attribute:
LDAPServerMBean.Credential
Changes take effect after you redeploy the module or restart the server.
|
Bind Anonymously On Referrals |
By default, the Active Directory Authentication provider uses the
same DN and password used to connect to the LDAP server when following
referrals during a search. If you want to connect as an anonymous
user, enable this attribute.
MBean Attribute:
LDAPServerMBean.BindAnonymouslyOnReferrals
Changes take effect after you redeploy the module or restart the server.
|
Static Group DNs from Member DN Filter |
No description provided.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.StaticGroupDNsfromMemberDNFilter
Changes take effect after you redeploy the module or restart the server.
|
Cache TTL |
The time-to-live of the cache (in seconds) that is used with the
Active Directory LDAP server
MBean Attribute:
LDAPServerMBean.CacheTTL
Minimum value: 0
Changes take effect after you redeploy the module or restart the server.
|
Static Member DN Attribute |
No description provided.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.StaticMemberDNAttribute
Changes take effect after you redeploy the module or restart the server.
|
All Users Filter |
If the attribute (user object class) is not specified (that is, if
the attribute is null or empty), a default search filter is created
based on the user schema.
MBean Attribute:
LDAPAuthenticatorMBean.AllUsersFilter
Changes take effect after you redeploy the module or restart the server.
|
Use Token Groups For Group Membership Lookup |
Indicates whether to use the Active Directory TokenGroups attribute
lookup algorithm instead of the standard recursive group membership
lookup algorithm.
To use this attribute, your Active Directory server must be running
in Native Mode and you must have implemented security groups in Active
Directory.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.UseTokenGroupsForGroupMembershipLookup
Changes take effect after you redeploy the module or restart the server.
|
Cache Size |
The size of the cache (in kilobytes) that is used with the Active
Directory LDAP server
MBean Attribute:
LDAPServerMBean.CacheSize
Minimum value: 0
Changes take effect after you redeploy the module or restart the server.
|
User From Name Filter |
If the attribute (user name attribute and user object class) is not
specified (that is, if the attribute is null or empty), a default
search filter is created based on the user schema.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.UserFromNameFilter
Changes take effect after you redeploy the module or restart the server.
|
Cache Enabled |
Specifies whether a cache is used with the Active Directory LDAP
server
This is a cache of the LDAP requests.
MBean Attribute:
LDAPServerMBean.CacheEnabled
Changes take effect after you redeploy the module or restart the server.
|
Group From Name Filter |
No description provided.
MBean Attribute:
ActiveDirectoryAuthenticatorMBean.GroupFromNameFilter
Changes take effect after you redeploy the module or restart the server.
|
Group Membership Searching |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.GroupMembershipSearching
Changes take effect after you redeploy the module or restart the server.
|
Max Group Membership Search Level |
No description provided.
MBean Attribute:
LDAPAuthenticatorMBean.MaxGroupMembershipSearchLevel
Changes take effect after you redeploy the module or restart the server.
|