Siebel Service Handheld Guide > Print Configuration Settings > Print Configuration Settings >
PrinterPort
Specify the port to which the printer is connected with the PrinterPort parameter. Table 42 describes the valid values you can specify for PrinterPort. If PrinterPort is an LPT port or a network path (value 2 or 9 in Table 42), then the PrinterBaudrate must be set to 0. NOTE: The communication port on the printer must be compatible with the host PDA. For IrDA, the serial communication setting must be set correctly to allow reliable printing.
Table 42. Printer Port
|
|
0 |
Com1: serial port |
1 |
Com2: serial port |
2 |
LPT: parallel port |
3 (default) |
IR Infrared port |
4 |
Com3: serial port |
5 |
Com4: serial port |
6 |
Com5: serial port |
7 |
Com6: serial port |
8 |
Print to OUTPUT.PRN |
9 |
Print to network address |
10 |
Bluetooth BlueCard solution by Wireless Solutions |
11 |
Socket PNC Bluetooth card support |
12 |
Bluetooth BlueCard solution by Anycom |
13 |
Com7: serial port |
14 |
Com8: serial port |
|