This chapter explains how to install and configure Oracle Internet Directory. It includes the following topics:
Installing and Configuring Only Oracle Internet Directory Without a WebLogic Administration Domain
Getting Started with Oracle Internet Directory After Installation
This topic describes how to install and configure Oracle Internet Directory with Oracle Directory Services Manager and Fusion Middleware Control in a new WebLogic administration domain. It includes the following sections:
The installation and configuration described in this topic is appropriate for environments that have all of the following conditions:
You want to manage Oracle Internet Directory using Fusion Middleware Control.
You want Oracle Internet Directory to be in a WebLogic administration domain.
There is no WebLogic Administration Server managing other 11g Release 1 (11.1.1) Oracle Directory Services components.
You want to install Oracle Internet Directory and a WebLogic Administration Server colocated on the same host.
Performing the installation and configuration in this section deploys the following components:
WebLogic Administration Server
Oracle Internet Directory
Oracle Directory Services Manager
Fusion Middleware Control
The installation and configuration in this section depends on the following:
Oracle WebLogic Server
Oracle Database
If you want to use an existing schema, Identity Management - Oracle Internet Directory schema existing in the Oracle Database.
Perform the following steps to install and configure Oracle Internet Directory with Oracle Directory Services Manager and Fusion Middleware Control in a new domain:
Install the Oracle Database for Oracle Internet Directory. Refer to "Installing Oracle Database" for more information.
Decide if you want to create a new schema for Oracle Internet Directory using the Installer during installation or if you want to use an existing schema:
If you want to create a new schema using the Installer, continue this procedure by going to step 3 now.
If you want to use an existing schema, it must be present in the Oracle Internet Directory database before you can install Oracle Internet Directory. Refer to "Creating Database Schema Using the Repository Creation Utility (RCU)" for more information.
Install Oracle WebLogic Server. Refer to "Installing Oracle WebLogic Server and Creating the Oracle Middleware Home" for more information.
Start your installation by performing all the steps in "Starting an Installation". After you complete those steps, the Select Domain screen appears.
On the Select Domain screen, select Create New Domain and enter the following information:
Enter the user name for the new domain in the User Name field.
Enter the user password for the new domain in the User Password field.
Enter the user password again in the Confirm Password field.
Enter a name for the new domain in the Domain Name field.
Click Next. The Specify Installation Location screen appears.
Identify the Homes, Instances, and the WebLogic Server directory by referring to "Identifying Installation Directories". After you enter information for each field, click Next. The Specify Security Updates screen appears.
Choose how you want to be notified about security issues:
If you want to be notified about security issues through email, enter your email address in the Email field.
If you want to be notified about security issues through My Oracle Support (formerly MetaLink), select the My Oracle Support option and enter your My Oracle Support Password.
If you do not want to be notified about security issues, leave all fields empty.
Click Next. The Configure Components screen appears.
Select Oracle Internet Directory. The Oracle Directory Services Manager and Fusion Middleware Control management components are automatically selected for this installation.
Ensure no other components are selected and click Next. The Configure Ports screen appears.
Choose how you want the Installer to configure ports:
Select Auto Port Configuration if you want the Installer to configure ports from a predetermined range.
Select Specify Ports using Configuration File if you want the Installer to configure ports using the staticports.ini file. You can click View/Edit File to update the settings in the staticports.ini file.
Click Next. The Specify Schema Database screen appears.
Choose whether to use an existing schema or to create a new one using the Installer.
Note:
If you want to use an existing schema, it must currently reside in the database to continue with the installation. If it does not currently reside in the database, you must create it using the Repository Creation Utility now.Refer to "Creating Database Schema Using the Repository Creation Utility (RCU)" for more information.
To use an existing schema:
Select Use Existing Schema.
Enter the database connection information in the Connect String field. The connection string must be in the form of hostname:port:servicename. For Oracle Real Application Clusters (RAC), the connection string must be in the form of hostname1:port1:instance1^hostname2:port2:instance2@servicename.
Enter the password for the existing ODS schema in the Password field.
Click Next.
Note:
If your existing ODS and ODSSM schemas have different passwords, the Specify ODSSM Password screen will appear after you click Next. Enter the password for your existing ODSSM schema and click Next.The Create Oracle Internet Directory screen appears.
Continue the installation by going to step 11 now.
To create a new schema:
Select Create Schema.
Enter the database connection information in the Connect String field. The connection string must be in the form of hostname:port:servicename. For Oracle Real Application Clusters (RAC), the connection string must be in the form of hostname1:port1:instance1^hostname2:port2:instance2@servicename.
Enter the name of the database user in the User Name field. The user you identify must have DBA privileges.
Enter the password for the database user in the Password field.
Click Next. The Enter OID Passwords screen appears.
Create a password for the new ODS schema by entering it in the ODS Schema Password field.
Enter it again in the Confirm ODS Schema Password field.
Create a password for the new ODSSM schema by entering it in the ODSSM Schema Password field.
Enter it again in the Confirm ODSSM Schema Password field.
Click Next. The Create Oracle Internet Directory screen appears.
Enter the following information for Oracle Internet Directory:
Realm: Enter the location for your realm.
Administrator Password: Enter the password for the Oracle Internet Directory administrator.
Confirm Password: Enter the administrator password again.
Click Next. The Installation Summary screen appears.
Complete the installation by performing all the steps in "Completing an Installation".
This topic describes how to install and configure Oracle Internet Directory with Oracle Directory Integration Platform, Oracle Directory Services Manager, and Fusion Middleware Control in a new WebLogic administration domain. It includes the following sections:
The installation and configuration described in this topic is appropriate for environments that have both of the following conditions:
You want to install Oracle Internet Directory and Oracle Directory Integration Platform colocated on the same host.
There is no WebLogic Administration Server managing other 11g Release 1 (11.1.1) Oracle Directory Services components.
Performing the installation and configuration in this section deploys the following components:
WebLogic Administration Server
Oracle Internet Directory
WebLogic Managed Server
Oracle Directory Integration Platform
Oracle Directory Services Manager
Fusion Middleware Control
The installation and configuration in this section depends on the following:
Oracle WebLogic Server
Oracle Database
If you want to use an existing schema, Identity Management - Oracle Internet Directory schema existing in the Oracle Database.
Perform the following steps to install and configure Oracle Internet Directory with Oracle Directory Integration Platform, Oracle Directory Services Manager, and Fusion Middleware Control in a new domain:
Install the Oracle Database for Oracle Internet Directory. Refer to "Installing Oracle Database" for more information.
Decide if you want to create a new schema for Oracle Internet Directory using the Installer during installation or if you want to use an existing schema:
If you want to create a new schema using the Installer, continue this procedure by going to step 3 now.
If you want to use an existing schema, it must be present in the Oracle Internet Directory database before you can install Oracle Internet Directory. Refer to "Creating Database Schema Using the Repository Creation Utility (RCU)" for more information.
Install Oracle WebLogic Server. Refer to "Installing Oracle WebLogic Server and Creating the Oracle Middleware Home" for more information.
Start your installation by performing all the steps in "Starting an Installation". After you complete those steps, the Select Domain screen appears.
On the Select Domain screen, select Create New Domain and enter the following information:
Enter the user name for the new domain in the User Name field.
Enter the user password for the new domain in the User Password field.
Enter the user password again in the Confirm Password field.
Enter a name for the new domain in the Domain Name field.
Click Next. The Specify Installation Location screen appears.
Identify the Homes, Instances, and the WebLogic Server directory by referring to "Identifying Installation Directories". After you enter information for each field, click Next. The Specify Security Updates screen appears.
Choose how you want to be notified about security issues:
If you want to be notified about security issues through email, enter your email address in the Email field.
If you want to be notified about security issues through My Oracle Support (formerly MetaLink), select the My Oracle Support option and enter your My Oracle Support Password.
If you do not want to be notified about security issues, leave all fields empty.
Click Next. The Configure Components screen appears.
Select Oracle Internet Directory and Oracle Directory Integration Platform. The Oracle Directory Services Manager and Fusion Middleware Control management components are automatically selected for this installation.
Ensure no other components are selected and click Next. The Configure Ports screen appears.
Choose how you want the Installer to configure ports:
Select Auto Port Configuration if you want the Installer to configure ports from a predetermined range.
Select Specify Ports using Configuration File if you want the Installer to configure ports using the staticports.ini file. You can click View/Edit File to update the settings in the staticports.ini file.
Click Next. The Specify Schema Database screen appears.
Choose whether to use an existing schema or to create a new one using the Installer.
Note:
If you want to use an existing schema, it must currently reside in the database to continue with the installation. If it does not currently reside in the database, you must create it using the Repository Creation Utility now.Refer to "Creating Database Schema Using the Repository Creation Utility (RCU)" for more information.
To use an existing schema:
Select Use Existing Schema.
Enter the database connection information in the Connect String field. The connection string must be in the form of hostname:port:servicename. For Oracle Real Application Clusters (RAC), the connection string must be in the form of hostname1:port1:instance1^hostname2:port2:instance2@servicename.
Enter the password for the existing ODS schema in the Password field.
Click Next.
Note:
If your existing ODS and ODSSM schemas have different passwords, the Specify ODSSM Password screen will appear after you click Next. Enter the password for your existing ODSSM schema and click Next.The Create Oracle Internet Directory screen appears.
Continue the installation by going to step 11 now.
To create a new schema:
Select Create Schema.
Enter the database connection information in the Connect String field. The connection string must be in the form of hostname:port:servicename. For Oracle Real Application Clusters (RAC), the connection string must be in the form of hostname1:port1:instance1^hostname2:port2:instance2@servicename.
Enter the name of the database user in the User Name field. The user you identify must have DBA privileges.
Enter the password for the database user in the Password field.
Click Next. The Enter OID Passwords screen appears.
Create a password for the new ODS schema by entering it in the ODS Schema Password field.
Enter it again in the Confirm ODS Schema Password field.
Create a password for the new ODSSM schema by entering it in the ODSSM Schema Password field.
Enter it again in the Confirm ODSSM Schema Password field.
Click Next. The Create Oracle Internet Directory screen appears.
Enter the following information for Oracle Internet Directory:
Realm: Enter the location for your realm.
Administrator Password: Enter the password for the Oracle Internet Directory administrator.
Confirm Password: Enter the administrator password again.
Click Next. The Installation Summary screen appears.
Complete the installation by performing all the steps in "Completing an Installation".
This topic describes how to install and configure only Oracle Internet Directory in an existing WebLogic administration domain. It includes the following sections:
The installation and configuration described in this topic is appropriate for environments that have both of the following conditions:
A WebLogic Administration Server is available to manage 11g Release 1 (11.1.1) Oracle Directory Services components and you want Oracle Internet Directory to join that domain.
You want to install Oracle Internet Directory separately from the WebLogic Administration Server.
Performing the installation and configuration in this section deploys only Oracle Internet Directory.
The installation and configuration in this section depends on the following:
Oracle WebLogic Server
Oracle Database
If you want to use an existing schema, Identity Management - Oracle Internet Directory schema existing in the Oracle Database.
Perform the following steps to install and configure only Oracle Internet Directory in an existing domain:
Install the Oracle Database for Oracle Internet Directory. Refer to "Installing Oracle Database" for more information.
Decide if you want to create a new schema for Oracle Internet Directory using the Installer during installation or if you want to use an existing schema:
If you want to create a new schema using the Installer, continue this procedure by going to step 3 now.
If you want to use an existing schema, it must be present in the Oracle Internet Directory database before you can install Oracle Internet Directory. Refer to "Creating Database Schema Using the Repository Creation Utility (RCU)" for more information.
Install Oracle WebLogic Server. Refer to "Installing Oracle WebLogic Server and Creating the Oracle Middleware Home" for more information.
Start your installation by performing all the steps in "Starting an Installation". After you complete those steps, the Select Domain screen appears.
On the Select Domain screen, select Extend Existing Domain and enter the following information:
Enter the name of the host that contains the domain in the Host Name field.
Enter the Oracle WebLogic Server listen port in the Port field.
Enter the user name for the domain in the User Name field.
Enter the password for the domain user in the User Password field.
Click Next. The Specify Installation Location screen appears.
Identify the Homes, Instances, and the WebLogic Server directory by referring to "Identifying Installation Directories". After you enter information for each field, click Next. The Specify Security Updates screen appears.
Choose how you want to be notified about security issues:
If you want to be notified about security issues through email, enter your email address in the Email field.
If you want to be notified about security issues through My Oracle Support (formerly MetaLink), select the My Oracle Support option and enter your My Oracle Support Password.
If you do not want to be notified about security issues, leave all fields empty.
Click Next. The Configure Components screen appears.
Select only Oracle Internet Directory. Ensure no other components are selected and click Next. The Configure Ports screen appears.
Choose how you want the Installer to configure ports:
Select Auto Port Configuration if you want the Installer to configure ports from a predetermined range.
Select Specify Ports using Configuration File if you want the Installer to configure ports using the staticports.ini file. You can click View/Edit File to update the settings in the staticports.ini file.
Click Next. The Specify Schema Database screen appears.
Choose whether to use an existing schema or to create a new one using the Installer.
Note:
If you want to use an existing schema, it must currently reside in the database to continue with the installation. If it does not currently reside in the database, you must create it using the Repository Creation Utility now.Refer to "Creating Database Schema Using the Repository Creation Utility (RCU)" for more information.
To use an existing schema:
Select Use Existing Schema.
Enter the database connection information in the Connect String field. The connection string must be in the form of hostname:port:servicename. For Oracle Real Application Clusters (RAC), the connection string must be in the form of hostname1:port1:instance1^hostname2:port2:instance2@servicename.
Enter the password for the existing ODS schema in the Password field.
Click Next.
Note:
If your existing ODS and ODSSM schemas have different passwords, the Specify ODSSM Password screen will appear after you click Next. Enter the password for your existing ODSSM schema and click Next.The Create Oracle Internet Directory screen appears.
Continue the installation by going to step 11 now.
To create a new schema:
Select Create Schema.
Enter the database connection information in the Connect String field. The connection string must be in the form of hostname:port:servicename. For Oracle Real Application Clusters (RAC), the connection string must be in the form of hostname1:port1:instance1^hostname2:port2:instance2@servicename.
Enter the name of the database user in the User Name field. The user you identify must have DBA privileges.
Enter the password for the database user in the Password field.
Click Next. The Enter OID Passwords screen appears.
Create a password for the new ODS schema by entering it in the ODS Schema Password field.
Enter it again in the Confirm ODS Schema Password field.
Create a password for the new ODSSM schema by entering it in the ODSSM Schema Password field.
Enter it again in the Confirm ODSSM Schema Password field.
Click Next. The Create Oracle Internet Directory screen appears.
Enter the following information for Oracle Internet Directory:
Realm: Enter the location for your realm.
Administrator Password: Enter the password for the Oracle Internet Directory administrator.
Confirm Password: Enter the administrator password again.
Click Next. The Installation Summary screen appears.
Complete the installation by performing all the steps in "Completing an Installation".
This topic describes how to install and configure only Oracle Internet Directory without a WebLogic administration domain. It includes the following sections:
The installation and configuration described in this topic is appropriate for environments that have both of the following conditions:
You do not want to include Oracle Internet Directory in a WebLogic administration domain for management purposes.
You do not want to manage Oracle Internet Directory using Fusion Middleware Control.
Performing the installation and configuration in this section deploys only Oracle Internet Directory.
The installation and configuration in this section depends on the following:
Oracle Database
If you want to use an existing schema, Identity Management - Oracle Internet Directory schema existing in the Oracle Database.
Perform the following steps to install and configure only Oracle Internet Directory without a domain:
Install the Oracle Database for Oracle Internet Directory. Refer to "Installing Oracle Database" for more information.
Decide if you want to create a new schema for Oracle Internet Directory using the Installer during installation or if you want to use an existing schema:
If you want to create a new schema using the Installer, continue this procedure by going to step 3 now.
If you want to use an existing schema, it must be present in the Oracle Internet Directory database before you can install Oracle Internet Directory. Refer to "Creating Database Schema Using the Repository Creation Utility (RCU)" for more information.
Start your installation by performing all the steps in "Starting an Installation". After you complete those steps, the Select Domain screen appears.
Select Configure without a Domain on the Select Domain screen and click Next. The Specify Installation Location screen appears.
Enter the following information in each field:
Oracle Middleware Home Location: If an Oracle Middleware Home directory already exists, enter the path to it in this field. If an Oracle Middleware Home directory does not exist, enter a path to the location where you want the Installer to create the directory that will contain the Oracle Common Home and Oracle Home directories. The Installer creates an Oracle Common Home directory and an Oracle Home directory inside the directory you identify in this field.
The Oracle Middleware Home directory is commonly referred to as MW_HOME.
Note:
The Oracle Middleware Home directory is not required to contain an Oracle WebLogic Server installation.Oracle Home Directory: Enter a name for the Oracle Home directory. The Installer uses the name you enter in this field to create the Oracle Home directory under the location you enter in the Oracle Middleware Home Location field. The Oracle Home directory is commonly referred to as ORACLE_HOME.
Oracle Instance Location: Enter the directory path to the location where you want to create the Oracle Instance directory. The Installer creates the Oracle Instance directory using the location you enter in this field and using the name you enter in the Oracle Instance Name field. You can identify any location on your system for the Oracle Instance directory—it does not have to reside inside the Oracle Middleware Home directory.
Oracle Instance Name: Enter a name for the Oracle Instance directory. The Installer uses the name you enter in this field to create the Oracle Instance directory at the location you specify in the Oracle Instance Location field. This directory is commonly referred to as ORACLE_INSTANCE.
After you enter information for each field, click Next. The Specify Security Updates screen appears.
Choose how you want to be notified about security issues:
If you want to be notified about security issues through email, enter your email address in the Email field.
If you want to be notified about security issues through My Oracle Support (formerly MetaLink), select the My Oracle Support option and enter your My Oracle Support Password.
If you do not want to be notified about security issues, leave all fields empty.
Click Next. The Configure Components screen appears.
On the Configure Components screen, select only Oracle Internet Directory. Ensure no other components are selected and click Next. The Configure Ports screen appears.
Choose how you want the Installer to configure ports:
Select Auto Port Configuration if you want the Installer to configure ports from a predetermined range.
Select Specify Ports using Configuration File if you want the Installer to configure ports using the staticports.ini file. You can click View/Edit File to update the settings in the staticports.ini file.
Click Next. The Specify Schema Database screen appears.
Choose whether to use an existing schema or to create a new one using the Installer.
Note:
If you want to use an existing schema, it must currently reside in the database to continue with the installation. If it does not currently reside in the database, you must create it using the Repository Creation Utility now.Refer to "Creating Database Schema Using the Repository Creation Utility (RCU)" for more information.
To use an existing schema:
Select Use Existing Schema.
Enter the database connection information in the Connect String field. The connection string must be in the form of hostname:port:servicename. For Oracle Real Application Clusters (RAC), the connection string must be in the form of hostname1:port1:instance1^hostname2:port2:instance2@servicename.
Enter the password for the existing ODS schema in the Password field.
Click Next.
Note:
If your existing ODS and ODSSM schemas have different passwords, the Specify ODSSM Password screen will appear after you click Next. Enter the password for your existing ODSSM schema and click Next.The Create Oracle Internet Directory screen appears.
Continue the installation by going to step 10 now.
To create a new schema:
Select Create Schema.
Enter the database connection information in the Connect String field. The connection string must be in the form of hostname:port:servicename. For Oracle Real Application Clusters (RAC), the connection string must be in the form of hostname1:port1:instance1^hostname2:port2:instance2@servicename.
Enter the name of the database user in the User Name field. The user you identify must have DBA privileges.
Enter the password for the database user in the Password field.
Click Next. The Enter OID Passwords screen appears.
Create a password for the new ODS schema by entering it in the ODS Schema Password field.
Enter it again in the Confirm ODS Schema Password field.
Create a password for the new ODSSM schema by entering it in the ODSSM Schema Password field.
Enter it again in the Confirm ODSSM Schema Password field.
Click Next. The Create Oracle Internet Directory screen appears.
Enter the following information for Oracle Internet Directory:
Realm: Enter the location for your realm.
Administrator Password: Enter the password for the Oracle Internet Directory administrator.
Confirm Password: Enter the administrator password again.
Click Next. The Installation Summary screen appears.
Complete the installation by performing all the steps in "Completing an Installation".
Note:
If you perform this installation and configuration, but later decide you want to manage Oracle Internet Directory using Fusion Middleware Control, you must register Oracle Internet Directory with a WebLogic Administration Server.Refer to the "Registering an Oracle Instance or Component with the WebLogic Server" section in the Oracle Fusion Middleware Administrator's Guide for Oracle Internet Directory for more information.
Verify the Oracle Internet Directory installation by:
Executing the $ORACLE_INSTANCE/bin/opmnctl status -l command.
Executing the $ORACLE_HOME/bin/ldapbind command on the Oracle Internet Directory non-SSL and SSL ports.
After installing Oracle Internet Directory, refer to the "Getting Started with Oracle Internet Directory" chapter in the Oracle Fusion Middleware Administrator's Guide for Oracle Internet Directory.