![]() ![]() ![]() ![]() |
Servers
A server is an instance of WebLogic Server that runs in its own Java Virtual Machine (JVM) and has its own configuration.
This page summarizes each server that has been configured in the current WebLogic Server domain.
When you create a domain, you also create an Administration Server, which runs the Administration Console and distributes configuration changes to other servers in the domain. In a typical production environment, you create one or more Managed Servers in the domain to host business applications and use the Administration Server only to configure and monitor the Managed Servers.
Column Display
You can show fewer or additional data points on this page by expanding Customize this table and modifying the Column Display list. Each data point displays in its own table column.
The following table lists all of the data points that you can display in columns on this page.
Name Description Name The alphanumeric name for this server instance.
MBean Attribute:
ServerMBean.Name
Changes take effect after you redeploy the module or restart the server.
Cluster The cluster, or group of WebLogic Server instances, to which this server belongs.
If set, the server will listen for cluster multicast events.
MBean Attribute:
ServerMBean.Cluster
Changes take effect after you redeploy the module or restart the server.
Machine The WebLogic Server host computer (machine) on which this server is meant to run.
If you want to use a Node Manager to start this server, you must assign the server to a machine and you must configure the machine for the Node Manager.
You cannot change this value if a server instance is already running.
MBean Attribute:
ServerMBean.Machine
Changes take effect after you redeploy the module or restart the server.
Virtual Machine When WLS is running on JRVE, this specifies the name of the virtual machine running this server
MBean Attribute:
ServerMBean.VirtualMachineName
Current Machine Return the machine on which the server is running. This will be different from the configuration if the server gets migrated automatically. * @return Machine on which server is running.
MBean Attribute:
ServerRuntimeMBean.CurrentMachine
State The current life cycle state of this server.
For example, a server can be in a RUNNING state in which it can receive and process requests or in an ADMIN state in which it can receive only administrative requests.
MBean Attribute:
ServerRuntimeMBean.State
Status of Last Action Status information related to this task.
Health The health state of the server as reported by the server's self-health monitoring.
For example, the server can report if it is overloaded by too many requests, if it needs more memory resources, or if it will soon fail for other reasons.
MBean Attribute:
ServerRuntimeMBean.HealthState
Listen Port The default TCP port that this server uses to listen for regular (non-SSL) incoming connections.
Administrators must have the right privileges before binding to a port or else this operation will not be successful and it will render the console un-reachable.
If this port is disabled, the SSL port must be enabled. Additional ports can be configured using network channels. The cluster (multicast) port is configured separately.
MBean Attribute:
ServerMBean.ListenPort
Minimum value:
1
Maximum value:
65535
Listen Address The IP address or DNS name this server uses to listen for incoming connections.
Servers can be reached through the following URL:
protocol://listen-address:listen-portAny network channel that you configure for this server can override this listen address.
If a server's listen address is undefined, clients can reach the server through an IP address of the computer that hosts the server, a DNS name that resolves to the host, or the localhost string. The localhost string can be used only for requests from clients that running on the same computer as the server.
If you want to limit the valid addresses for a server instance, specify one of the following:
If you provide an IP address, clients can specify either the IP address or a DNS name that maps to the IP address. Clients that specify an IP address and attempt to connect through an SSL port must disable hostname verification.
If you provide a DNS name, clients can specify either the DNS name or the corresponding IP address.
Do not leave the listen address undefined on a computer that uses multiple IP address (a multihomed computer). On such a computer, the server will bind to all available IP addresses.
- Notes:
To resolve a DNS name to an IP address, WebLogic Server must be able to contact an appropriate DNS server or obtain the IP address mapping locally. Therefore, if you specify a DNS name for the listen address, you must either leave a port open long enough for the WebLogic Server instance to connect to a DNS server and cache its mapping or you must specify the IP address mapping in a local file. If you specify an IP address for ListenAddress and then a client request specifies a DNS name, WebLogic Server will attempt to resolve the DNS name, but if it cannot access DNS name mapping, the request will fail.
Note also that you are using the demo certificates in a multi-server domain, Managed Server instances will fail to boot if you specify the fully-qualified DNS name. For information about this limitation and suggested workarounds, see "Limitation on CertGen Usage" in Securing Oracle WebLogic Server.
MBean Attribute:
ServerMBean.ListenAddress
Changes take effect after you redeploy the module or restart the server.
Cluster Weight The proportion of the load that this server will bear, relative to other servers in a cluster.
If all servers have the default weight or the same weight, each bears an equal proportion of the load. If one server has weight 50 and all other servers have weight 100, the 50-weight server will bear half as much load as any other server.
MBean Attribute:
ServerMBean.ClusterWeight
Minimum value:
1
Maximum value:
100
Changes take effect after you redeploy the module or restart the server.
Expected To Run If this server expected to run if the domain is started.
Changes take effect after you redeploy the module or restart the server.
SSL Enabled SSL Listen Port The TCP/IP port at which this server listens for SSL connection requests.
MBean Attribute:
SSLMBean.ListenPort
Minimum value:
1
Maximum value:
65535
SSL Listen Port Enabled Indicates whether the server can be reached through the default SSL listen port.
If the administration port is enabled for the WebLogic Server domain, then administrative traffic travels over the administration port and application traffic travels over the Listen Port and SSL Listen Port. If the administration port is disabled, then all traffic travels over the Listen Port and SSL Listen Port.
MBean Attribute:
SSLMBean.Enabled
Secure value:
true
IIOP Enabled Specifies whether this server has IIOP support enabled for both the regular (non-SSL) and SSL ports.
MBean Attribute:
ServerMBean.IIOPEnabled
Changes take effect after you redeploy the module or restart the server.
Default IIOP Username The user name of the default IIOP user. (Requires you to enable IIOP.)
MBean Attribute:
ServerMBean.DefaultIIOPUser
Changes take effect after you redeploy the module or restart the server.
HTTPD Enabled Whether or not HTTP support is enabled on the regular port or SSL port.
MBean Attribute:
ServerMBean.HttpdEnabled
Changes take effect after you redeploy the module or restart the server.
Listen Thread Start Delay Secs Returns the maximum time that the server will wait for server sockets to bind before starting a listen thread.
Properties to consider for removal
MBean Attribute:
ServerMBean.ListenThreadStartDelaySecs
Changes take effect after you redeploy the module or restart the server.
Accept Backlog The number of backlogged, new TCP connection requests that should be allowed for this server's regular and SSL ports.
Setting the backlog to
0
may prevent this server from accepting any incoming connection on some operating systems.MBean Attribute:
ServerMBean.AcceptBacklog
Minimum value:
0
Currently Open Sockets The current number of sockets registered for socket muxing on this server.
MBean Attribute:
ServerRuntimeMBean.OpenSocketsCurrentCount
Total Sockets Opened The total number of registrations for socket muxing on this sever.
MBean Attribute:
ServerRuntimeMBean.SocketsOpenedTotalCount
Heap Size Current The current size (in bytes) of the JVM heap.
MBean Attribute:
JVMRuntimeMBean.HeapSizeCurrent
Heap Free Current The current amount of memory (in bytes) that is available in the JVM heap.
MBean Attribute:
JVMRuntimeMBean.HeapFreeCurrent
OS Version The version of the operating system on which the JVM is running.
MBean Attribute:
JVMRuntimeMBean.OSVersion
WebLogic Version The version of this WebLogic Server instance (server).
MBean Attribute:
ServerRuntimeMBean.WeblogicVersion
User Lockout Total The total number of user lockouts that have occurred on this server instance.
Invalid Login Attempts Total The total number of invalid logins that have been attempted on this server instance.
Login Attempts While Locked Total The total number of invalid logins that have been attempted on this server instance while a user was locked.
Invalid Login Users High The highest number of users with outstanding invalid login attempts on this server instance.
Unlocked Users Total The total number of times a user of this server instance has been unlocked.
Java Version The Java version of the JVM.
MBean Attribute:
JVMRuntimeMBean.JavaVersion
Locked Users Current Count The current number of locked users on this server instance.
Processor Load The current load that this server's Virtual Machine is placing on all processors in the host computer.
JACC Enabled Indicates whether JACC (Java Authorization Contract for Containers) was enabled on the commandline for the jvm hosting this server
MBean Attribute:
ServerSecurityRuntimeMBean.JACCEnabled
![]() |