java.lang.Object java.util.regex.Pattern
A compiled representation of a regular expression.
A regular expression, specified as a string, must first be compiled into an instance of this class. The resulting pattern can then be used to create a Matcher object that can match arbitrary character sequences against the regular expression. All of the state involved in performing a match resides in the matcher, so many matchers can share the same pattern.
A typical invocation sequence is thus
Pattern p = Pattern.compile("a*b"); Matcher m = p.matcher("aaaaab"); boolean b = m.matches();
A matches method is defined by this class as a convenience for when a regular expression is used just once. This method compiles an expression and matches an input sequence against it in a single invocation. The statement
is equivalent to the three statements above, though for repeated matches it is less efficient since it does not allow the compiled pattern to be reused.boolean b = Pattern.matches("a*b", "aaaaab");
Instances of this class are immutable and are safe for use by multiple concurrent threads. Instances of the
Matcher
class are not safe for such use.
Summary of regular-expression constructs
Construct | Matches |
---|---|
Characters | |
x | The character x |
\\ | The backslash character |
\0 n | The character with octal value 0 n (0 <= n <= 7) |
\0 nn | The character with octal value 0 nn (0 <= n <= 7) |
\0 mnn | The character with octal value 0 mnn (0 <= m <= 3, 0 <= n <= 7) |
\x hh | The character with hexadecimal value 0x hh |
\u hhhh | The character with hexadecimal value 0x hhhh |
\t | The tab character ( '\u0009' ) |
\n | The newline (line feed) character ( '\u000A' ) |
\r | The carriage-return character ( '\u000D' ) |
\f | The form-feed character ( '\u000C' ) |
\a | The alert (bell) character ( '\u0007' ) |
\e | The escape character ( '\u001B' ) |
\c x | The control character corresponding to x |
Character classes | |
[abc] | a , b , or c (simple class) |
[^abc] | Any character except a , b , or c (negation) |
[a-zA-Z] | a through z or A through Z , inclusive (range) |
[a-d[m-p]] | a through d , or m through p : [a-dm-p] (union) |
[a-z&&[def]] | d , e , or f (intersection) |
[a-z&&[^bc]] | a through z , except for b and c : [ad-z] (subtraction) |
[a-z&&[^m-p]] | a through z , and not m through p : [a-lq-z] (subtraction) |
Predefined character classes | |
. | Any character (may or may not match line terminators ) |
\d | A digit: [0-9] |
\D | A non-digit: [^0-9] |
\s | A whitespace character: [ \t\n\x0B\f\r] |
\S | A non-whitespace character: [^\s] |
\w | A word character: [a-zA-Z_0-9] |
\W | A non-word character: [^\w] |
POSIX character classes (US-ASCII only) | |
\p{Lower} | A lower-case alphabetic character: [a-z] |
\p{Upper} | An upper-case alphabetic character: [A-Z] |
\p{ASCII} | All ASCII: [\x00-\x7F] |
\p{Alpha} | An alphabetic character: [\p{Lower}\p{Upper}] |
\p{Digit} | A decimal digit: [0-9] |
\p{Alnum} | An alphanumeric character: [\p{Alpha}\p{Digit}] |
\p{Punct} | Punctuation: One of !"#$%&'()*+,-./:;<=> ?@[\]^_`{|}~ |
\p{Graph} | A visible character: [\p{Alnum}\p{Punct}] |
\p{Print} | A printable character: [\p{Graph}] |
\p{Blank} | A space or a tab: [ \t] |
\p{Cntrl} | A control character: [\x00-\x1F\x7F] |
\p{XDigit} | A hexadecimal digit: [0-9a-fA-F] |
\p{Space} | A whitespace character: [ \t\n\x0B\f\r] |
java.lang.Character classes (simple java character type | |
\p{javaLowerCase} | Equivalent to java.lang.Character.isLowerCase() |
\p{javaUpperCase} | Equivalent to java.lang.Character.isUpperCase() |
\p{javaWhitespace} | Equivalent to java.lang.Character.isWhitespace() |
\p{javaMirrored} | Equivalent to java.lang.Character.isMirrored() |
Classes for Unicode blocks and categories | |
\p{InGreek} | A character in the Greek block (simple block ) |
\p{Lu} | An uppercase letter (simple category ) |
\p{Sc} | A currency symbol |
\P{InGreek} | Any character except one in the Greek block (negation) |
[\p{L}&&[^\p{Lu}]] | Any letter except an uppercase letter (subtraction) |
Boundary matchers | |
^ | The beginning of a line |
$ | The end of a line |
\b | A word boundary |
\B | A non-word boundary |
\A | The beginning of the input |
\G | The end of the previous match |
\Z | The end of the input but for the final terminator , if any |
\z | The end of the input |
Greedy quantifiers | |
X ? | X , once or not at all |
X * | X , zero or more times |
X + | X , one or more times |
X { n } | X , exactly n times |
X { n ,} | X , at least n times |
X { n , m } | X , at least n but not more than m times |
Reluctant quantifiers | |
X ?? | X , once or not at all |
X *? | X , zero or more times |
X +? | X , one or more times |
X { n }? | X , exactly n times |
X { n ,}? | X , at least n times |
X { n , m }? | X , at least n but not more than m times |
Possessive quantifiers | |
X ?+ | X , once or not at all |
X *+ | X , zero or more times |
X ++ | X , one or more times |
X { n }+ | X , exactly n times |
X { n ,}+ | X , at least n times |
X { n , m }+ | X , at least n but not more than m times |
Logical operators | |
XY | X followed by Y |
X | Y | Either X or Y |
( X ) | X, as a capturing group |
Back references | |
\ n | Whatever the n th capturing group matched |
Quotation | |
\ | Nothing, but quotes the following character |
\Q | Nothing, but quotes all characters until \E |
\E | Nothing, but ends quoting started by \Q |
Special constructs (non-capturing) | |
(?: X ) | X , as a non-capturing group |
(?idmsux-idmsux) | Nothing, but turns match flags on - off |
(?idmsux-idmsux: X ) | X , as a non-capturing group with the given flags on - off |
(?= X ) | X , via zero-width positive lookahead |
(?! X ) | X , via zero-width negative lookahead |
(?<= X ) | X , via zero-width positive lookbehind |
(?<! X ) | X , via zero-width negative lookbehind |
(?> X ) | X , as an independent, non-capturing group |
The backslash character ( '\' ) serves to introduce escaped constructs, as defined in the table above, as well as to quote characters that otherwise would be interpreted as unescaped constructs. Thus the expression \\ matches a single backslash and \{ matches a left brace.
It is an error to use a backslash prior to any alphabetic character that does not denote an escaped construct; these are reserved for future extensions to the regular-expression language. A backslash may be used prior to a non-alphabetic character regardless of whether that character is part of an unescaped construct.
Backslashes within string literals in Java source code are interpreted as required by the
Java Language Specification
as either
Unicode escapes
or other
character escapes
. It is therefore necessary to double backslashes in string literals that represent regular expressions to protect them from interpretation by the Java bytecode compiler. The string literal
"\b"
, for example, matches a single backspace character when interpreted as a regular expression, while
"\\b"
matches a word boundary. The string literal
"\(hello\)"
is illegal and leads to a compile-time error; in order to match the string
(hello)
the string literal
"\\(hello\\)"
must be used.
Character classes may appear within other character classes, and may be composed by the union operator (implicit) and the intersection operator (
&&
). The union operator denotes a class that contains every character that is in at least one of its operand classes. The intersection operator denotes a class that contains every character that is in both of its operand classes.
The precedence of character-class operators is as follows, from highest to lowest:
Note that a different set of metacharacters are in effect inside a character class than outside a character class. For instance, the regular expression
.
loses its special meaning inside a character class, while the expression
-
becomes a range forming metacharacter.
A
line terminator
is a one- or two-character sequence that marks the end of a line of the input character sequence. The following are recognized as line terminators:
If
UNIX_LINES
mode is activated, then the only line terminators recognized are newline characters.
The regular expression
.
matches any character except a line terminator unless the
DOTALL
flag is specified.
By default, the regular expressions
^
and
$
ignore line terminators and only match at the beginning and the end, respectively, of the entire input sequence. If
MULTILINE
mode is activated then
^
matches at the beginning of input and after any line terminator except at the end of input. When in
MULTILINE
mode
$
matches just before a line terminator or the end of the input sequence.
Capturing groups are numbered by counting their opening parentheses from left to right. In the expression
((A)(B(C)))
, for example, there are four such groups:
Group zero always stands for the entire expression.
Capturing groups are so named because, during a match, each subsequence of the input sequence that matches such a group is saved. The captured subsequence may be used later in the expression, via a back reference, and may also be retrieved from the matcher once the match operation is complete.
The captured input associated with a group is always the subsequence that the group most recently matched. If a group is evaluated a second time because of quantification then its previously-captured value, if any, will be retained if the second evaluation fails. Matching the string
"aba"
against the expression
(a(b)?)+
, for example, leaves group two set to
"b"
. All captured input is discarded at the beginning of each match.
Groups beginning with
(?
are pure,
non-capturing
groups that do not capture text and do not count towards the group total.
This class follows
Unicode Technical Report #18: Unicode Regular Expression Guidelines
, implementing its second level of support though with a slightly different concrete syntax.
Unicode escape sequences such as
\u2014
in Java source code are processed as described in
?3.3
of the Java Language Specification. Such escape sequences are also implemented directly by the regular-expression parser so that Unicode escapes can be used in expressions that are read from files or from the keyboard. Thus the strings
"\u2014"
and
"\\u2014"
, while not equal, compile into the same pattern, which matches the character with hexadecimal value
0x2014
.
Unicode blocks and categories are written with the
\p
and
\P
constructs as in Perl.
\p{
prop
}
matches if the input has the property
prop
, while \P{
prop
}
does not match if the input has that property. Blocks are specified with the prefix
In
, as in
InMongolian
. Categories may be specified with the optional prefix
Is
: Both
\p{L}
and
\p{IsL}
denote the category of Unicode letters. Blocks and categories can be used both inside and outside of a character class.
Character Classes
1
Literal escape
\x
2
Grouping
[...]
3
Range
a-z
4
Union
[a-e][i-u]
5
Intersection
[a-z&&[aeiou]]
Line terminators
Groups and capturing
1
((A)(B(C)))
2
(A)
3
(B(C))
4
(C)
Unicode support
. The block names are those defined in Chapter 14 and in the file
Categories that behave like the java.lang.Character boolean is methodname methods (except for the deprecated ones) are available through the same \p{ prop } syntax where the specified property has the name java methodname .
The Pattern engine performs traditional NFA-based matching with ordered alternation as occurs in Perl 5.
Perl constructs not supported by this class:
The conditional constructs (?{ X }) and (?( condition ) X | Y ) ,
The embedded code constructs (?{ code }) and (??{ code }) ,
The embedded comment syntax (?#comment) , and
The preprocessing operations \l \u , \L , and \U .
Constructs supported by this class but not by Perl:
Possessive quantifiers, which greedily match as much as they can and do not back off, even when doing so would allow the overall match to succeed.
Character-class union and intersection as described
above
.
The category names are those defined in table 4-5 of the Standard (p. 88), both normative and informative.
Constructs supported by this class but not by Perl:
Possessive quantifiers, which greedily match as much as they can and do not back off, even when doing so would allow the overall match to succeed.
Character-class union and intersection as described
above
Notable differences from Perl:
In Perl, \1 through \9 are always interpreted as back references; a backslash-escaped number greater than 9 is treated as a back reference if at least that many subexpressions exist, otherwise it is interpreted, if possible, as an octal escape. In this class octal escapes must always begin with a zero. In this class, \1 through \9 are always interpreted as back references, and a larger number is accepted as a back reference if at least that many subexpressions exist at that point in the regular expression, otherwise the parser will drop digits until the number is smaller or equal to the existing number of groups or it is one digit.
Perl uses the g flag to request a match that resumes where the last match left off. This functionality is provided implicitly by the Matcher class: Repeated invocations of the find method will resume where the last match left off, unless the matcher is reset.
In Perl, embedded flags at the top level of an expression affect the whole expression. In this class, embedded flags always take effect at the point at which they appear, whether they are at the top level or within a group; in the latter case, flags are restored at the end of the group just as in Perl.
Perl is forgiving about malformed matching constructs, as in the expression *a , as well as dangling brackets, as in the expression abc] , and treats them as literals. This class also accepts dangling brackets but is strict about dangling metacharacters like +, ? and *, and will throw a PatternSyntaxException if it encounters them.
For a more precise description of the behavior of regular expression constructs, please see Mastering Regular Expressions, 2nd Edition , Jeffrey E. F. Friedl, O'Reilly and Associates, 2002.
Field Summary | |
---|---|
static int |
CANON_EQ
Enables canonical equivalence. |
static int |
CASE_INSENSITIVE
Enables case-insensitive matching. |
static int |
COMMENTS
Permits whitespace and comments in pattern. |
static int |
DOTALL
Enables dotall mode. |
static int |
LITERAL
Enables literal parsing of the pattern. |
static int |
MULTILINE
Enables multiline mode. |
static int |
UNICODE_CASE
Enables Unicode-aware case folding. |
static int |
UNIX_LINES
Enables Unix lines mode. |
Method Summary | |
---|---|
static Pattern |
compile
(
String
regex) Compiles the given regular expression into a pattern. |
static Pattern |
compile
(
String
regex, int flags) Compiles the given regular expression into a pattern with the given flags. |
int |
flags
() Returns this pattern's match flags. |
Matcher |
matcher
(
CharSequence
input) Creates a matcher that will match the given input against this pattern. |
static boolean |
matches
(
String
regex,
CharSequence
input) Compiles the given regular expression and attempts to match the given input against it. |
String |
pattern
() Returns the regular expression from which this pattern was compiled. |
static String |
quote
(
String
Returns a literal pattern String for the specified String. |
String [] |
split
(
CharSequence
input) Splits the given input sequence around matches of this pattern. |
String [] |
split
(
CharSequence
input, int limit) Splits the given input sequence around matches of this pattern. |
String |
toString
()
Returns the string representation of this pattern. |
Methods inherited from class java.lang. Object |
---|
clone
,
equals
,
finalize
,
getClass
,
hashCode
,
notify
,
notifyAll
,
|
Field Detail |
---|
public static final int UNIX_LINES
In this mode, only the '\n' line terminator is recognized in the behavior of . , ^ , and $ .
Unix lines mode can also be enabled via the embedded flag expression (?d) .
public static final int CASE_INSENSITIVE
By default, case-insensitive matching assumes that only characters in the US-ASCII charset are being matched. Unicode-aware case-insensitive matching can be enabled by specifying the UNICODE_CASE flag in conjunction with this flag.
Case-insensitive matching can also be enabled via the embedded flag expression (?i) .
Specifying this flag may impose a slight performance penalty.
public static final int COMMENTS
In this mode, whitespace is ignored, and embedded comments starting with # are ignored until the end of a line.
Comments mode can also be enabled via the embedded flag expression (?x) .
public static final int MULTILINE
In multiline mode the expressions ^ and $ match just after or just before, respectively, a line terminator or the end of the input sequence. By default these expressions only match at the beginning and the end of the entire input sequence.
Multiline mode can also be enabled via the embedded flag expression (?m) .
public static final int LITERAL
When this flag is specified then the input string that specifies the pattern is treated as a sequence of literal characters. Metacharacters or escape sequences in the input sequence will be given no special meaning.
The flags CASE_INSENSITIVE and UNICODE_CASE retain their impact on matching when used in conjunction with this flag. The other flags become superflous.
There is no embedded flag character for enabling literal parsing.
public static final int DOTALL
In dotall mode, the expression . matches any character, including a line terminator. By default this expression does not match line terminators.
Dotall mode can also be enabled via the embedded flag expression (?s) . (The s is a mnemonic for "single-line" mode, which is what this is called in Perl.)
public static final int UNICODE_CASE
When this flag is specified then case-insensitive matching, when enabled by the CASE_INSENSITIVE flag, is done in a manner consistent with the Unicode Standard. By default, case-insensitive matching assumes that only characters in the US-ASCII charset are being matched.
Unicode-aware case folding can also be enabled via the embedded flag expression (?u) .
Specifying this flag may impose a performance penalty.
public static final int CANON_EQ
When this flag is specified then two characters will be considered to match if, and only if, their full canonical decompositions match. The expression "a\u030A" , for example, will match the string "?" when this flag is specified. By default, matching does not take canonical equivalence into account.
There is no embedded flag character for enabling canonical equivalence.
Specifying this flag may impose a performance penalty.
Method Detail |
---|
public static Pattern compile(String regex)
public static Pattern compile(String regex, int flags)
public String pattern()
public StringtoString ()
Returns the string representation of this pattern. This is the regular expression from which this pattern was compiled.
public Matcher matcher(CharSequence input)
public int flags()
public static boolean matches(String regex, CharSequence input)
An invocation of this convenience method of the form
behaves in exactly the same way as the expressionPattern.matches(regex, input);
Pattern.compile(regex).matcher(input).matches()
If a pattern is to be used multiple times, compiling it once and reusing it will be more efficient than invoking this method each time.
public String[] split(CharSequence input, int limit)
The array returned by this method contains each substring of the input sequence that is terminated by another subsequence that matches this pattern or is terminated by the end of the input sequence. The substrings in the array are in the order in which they occur in the input. If this pattern does not match any subsequence of the input then the resulting array has just one element, namely the input sequence in string form.
The limit parameter controls the number of times the pattern is applied and therefore affects the length of the resulting array. If the limit n is greater than zero then the pattern will be applied at most n - 1 times, the array's length will be no greater than n , and the array's last entry will contain all input beyond the last matched delimiter. If n is non-positive then the pattern will be applied as many times as possible and the array can have any length. If n is zero then the pattern will be applied as many times as possible, the array can have any length, and trailing empty strings will be discarded.
The input "boo:and:foo" , for example, yields the following results with these parameters:
Regex
Limit
Result
: 2 { "boo", "and:foo" } : 5 { "boo", "and", "foo" } : -2 { "boo", "and", "foo" } o 5 { "b", "", ":and:f", "", "" } o -2 { "b", "", ":and:f", "", "" } o 0 { "b", "", ":and:f" }
public String[] split(CharSequence input)
This method works as if by invoking the two-argument split method with the given input sequence and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.
The input "boo:and:foo" , for example, yields the following results with these expressions:
: { "boo", "and", "foo" } o { "b", "", ":and:f" }
public static Stringquote ( String s)
This method produces a String that can be used to create a Pattern that would match the string s as if it were a literal pattern.
Metacharacters or escape sequences in the input sequence will be given no special meaning.
The input
"boo:and:foo"
, for example, yields the following results with these expressions:
:{ "boo", "and", "foo" }o{ "b", "", ":and:f" }