TopBlend:
Here is the
first difference.
There are 7 differences.
is old.
is new.
javax.imageio.stream
Class ImageInputStreamImpl
java.lang.Object
javax.imageio.stream.ImageInputStreamImpl
-
All Implemented Interfaces:
-
DataInput
,
ImageInputStream
-
Direct Known Subclasses:
-
FileCacheImageInputStream
,
FileImageInputStream
,
ImageOutputStreamImpl
,
MemoryCacheImageInputStream
-
public abstract class ImageInputStreamImpl
- extends Object
- implements ImageInputStream
An abstract class implementing the ImageInputStream interface. This class is designed to reduce the number of methods that must be implemented by subclasses.
In particular, this class handles most or all of the details of byte order interpretation, buffering, mark/reset, discarding, closing, and disposing.
Field Summary
|
protected int |
bitOffset
The current bit offset within the stream. |
protected
ByteOrder
|
byteOrder
The byte order of the stream as an instance of the enumeration class java.nio.ByteOrder, where ByteOrder.BIG_ENDIAN indicates network byte order and ByteOrder.LITTLE_ENDIAN indicates the reverse order. |
protected long |
flushedPos
The position prior to which data may be discarded. |
protected long |
streamPos
The current read position within the stream. |
Method Summary
|
protected void |
checkClosed
()
Throws an IOException if the stream has been closed. |
void |
close
()
Closes the stream. |
protected void |
finalize
()
Finalizes this object prior to garbage collection. |
void |
flush
()
Discards the initial position of the stream prior to the current stream position. |
void |
flushBefore
(long pos)
Discards the initial portion of the stream prior to the indicated postion. |
int |
getBitOffset
()
Returns the current bit offset, as an integer between 0 and 7, inclusive. |
ByteOrder
|
getByteOrder
()
Returns the byte order with which data values will be read from this stream as an instance of the java.nio.ByteOrder enumeration. |
long |
getFlushedPosition
()
Returns the earliest position in the stream to which seeking may be performed. |
long |
getStreamPosition
()
Returns the current byte position of the stream. |
boolean |
isCached
()
Default implementation returns false. |
boolean |
isCachedFile
()
Default implementation returns false. |
boolean |
isCachedMemory
()
Default implementation returns false. |
long |
length
()
Returns -1L to indicate that the stream has unknown length. |
void |
mark
()
Pushes the current stream position onto a stack of marked positions. |
abstract int |
read
()
Reads a single byte from the stream and returns it as an
int
integer
between 0 and 255. |
int |
read
(byte[] b)
A convenience method that calls read(b, 0, b.length). |
abstract int |
read
(byte[] b, int off, int len)
Reads up to len bytes from the stream, and stores them into b starting at index off. |
int |
readBit
()
Reads a single bit from the stream and returns it as an int with the value 0 or 1. |
long |
readBits
(int numBits)
Reads a bitstring from the stream and returns it as a long, with the first bit read becoming the most significant bit of the output. |
boolean |
readBoolean
()
Reads a byte from the stream and returns a boolean value of true if it is nonzero, false if it is zero. |
byte |
readByte
()
Reads a byte from the stream and returns it as a byte value. |
void |
readBytes
(
IIOByteBuffer
buf, int len)
Reads up to len bytes from the stream, and modifies the supplied IIOByteBuffer to indicate the byte array, offset, and length where the data may be found. |
char |
readChar
()
Equivalent to readUnsignedShort, except that the result is returned using the char datatype. |
double |
readDouble
()
Reads 8 bytes from the stream, and (conceptually) concatenates them according to the current byte order and returns the result as a double. |
float |
readFloat
()
Reads 4 bytes from the stream, and (conceptually) concatenates them according to the current byte order and returns the result as a float. |
void |
readFully
(byte[] b)
Reads b.length bytes from the stream, and stores them into b starting at index 0. |
void |
readFully
(byte[] b, int off, int len)
Reads len bytes from the stream, and stores them into b starting at index off. |
void |
readFully
(char[] c, int off, int len)
Reads len chars (unsigned 16-bit integers) from the stream according to the current byte order, and stores them into c starting at index off. |
void |
readFully
(double[] d, int off, int len)
Reads len doubles (64-bit IEEE double-precision floats) from the stream according to the current byte order, and stores them into d starting at index off. |
void |
readFully
(float[] f, int off, int len)
Reads len floats (32-bit IEEE single-precision floats) from the stream according to the current byte order, and stores them into f starting at index off. |
void |
readFully
(int[] i, int off, int len)
Reads len ints (signed 32-bit integers) from the stream according to the current byte order, and stores them into i starting at index off. |
void |
readFully
(long[] l, int off, int len)
Reads len longs (signed 64-bit integers) from the stream according to the current byte order, and stores them into l starting at index off. |
void |
readFully
(short[] s, int off, int len)
Reads len shorts (signed 16-bit integers) from the stream according to the current byte order, and stores them into s starting at index off. |
int |
readInt
()
Reads 4 bytes from the stream, and (conceptually) concatenates them according to the current byte order and returns the result as an int. |
String
|
readLine
()
Reads the next line of text from the input stream. |
long |
readLong
()
Reads 8 bytes from the stream, and (conceptually) concatenates them according to the current byte order and returns the result as a long. |
short |
readShort
()
Reads two bytes from the stream, and (conceptually) concatenates them according to the current byte order, and returns the result as a short value. |
int |
readUnsignedByte
()
Reads a byte from the stream, and (conceptually) converts it to an int, masks it with 0xff in order to strip off any sign-extension bits, and returns it as a byte value. |
long |
readUnsignedInt
()
Reads 4 bytes from the stream, and (conceptually) concatenates them according to the current byte order, converts the result to a long, masks it with 0xffffffffL in order to strip off any sign-extension bits, and returns the result as an unsigned long value. |
int |
readUnsignedShort
()
Reads two bytes from the stream, and (conceptually) concatenates them according to the current byte order, converts the resulting value to an int, masks it with 0xffff in order to strip off any sign-extension buts, and returns the result as an unsigned int value. |
String
|
readUTF
()
Reads in a string that has been encoded using a
modified UTF-8
format. |
void |
reset
()
Resets the current stream byte and bit positions from the stack of marked positions. |
void |
seek
(long pos)
Sets the current stream position to the desired location. |
void |
setBitOffset
(int bitOffset)
Sets the bit offset to an integer between 0 and 7, inclusive. |
void |
setByteOrder
(
ByteOrder
byteOrder)
Sets the desired byte order for future reads of data values from this stream. |
int |
skipBytes
(int n)
Advances the current stream position by calling seek(getStreamPosition() + n). |
long |
skipBytes
(long n)
Advances the current stream position by calling seek(getStreamPosition() + n). |
byteOrder
protected ByteOrder byteOrder
-
The byte order of the stream as an instance of the enumeration class java.nio.ByteOrder, where ByteOrder.BIG_ENDIAN indicates network byte order and ByteOrder.LITTLE_ENDIAN indicates the reverse order. By default, the value is ByteOrder.BIG_ENDIAN.
streamPos
protected long streamPos
-
The current read position within the stream. Subclasses are responsible for keeping this value current from any method they override that alters the read position.
bitOffset
protected int bitOffset
-
The current bit offset within the stream. Subclasses are responsible for keeping this value current from any method they override that alters the bit offset.
flushedPos
protected long flushedPos
-
The position prior to which data may be discarded. Seeking to a smaller position is not allowed. flushedPos will always be >= 0.
ImageInputStreamImpl
public ImageInputStreamImpl()
-
Constructs an ImageInputStreamImpl.
checkClosed
protected final void checkClosed()
throws IOException
-
Throws an IOException if the stream has been closed. Subclasses may call this method from any of their methods that require the stream not to be closed.
-
-
-
Throws:
-
IOException
- if the stream is closed.
setByteOrder
public void setByteOrder(ByteOrder byteOrder)
-
Description copied from interface:
ImageInputStream
-
Sets the desired byte order for future reads of data values from this stream. For example, the sequence of bytes '0x01 0x02 0x03 0x04' if read as a 4-byte integer would have the value '0x01020304' using network byte order and the value '0x04030201' under the reverse byte order.
The enumeration class java.nio.ByteOrder is used to specify the byte order. A value of ByteOrder.BIG_ENDIAN specifies so-called big-endian or network byte order, in which the high-order byte comes first. Motorola and Sparc processors store data in this format, while Intel processors store data in the reverse ByteOrder.LITTLE_ENDIAN order.
The byte order has no effect on the results returned from the readBits method (or the value written by ImageOutputStream.writeBits).
-
-
Specified by:
-
setByteOrder
in interface
ImageInputStream
-
-
Parameters:
-
byteOrder - one of ByteOrder.BIG_ENDIAN or java.nio.ByteOrder.LITTLE_ENDIAN, indicating whether network byte order or its reverse will be used for future reads.
-
See Also:
-
ByteOrder
,
ImageInputStream.getByteOrder()
,
ImageInputStream.readBits(int)
getByteOrder
public ByteOrder getByteOrder()
-
Description copied from interface:
ImageInputStream
-
Returns the byte order with which data values will be read from this stream as an instance of the java.nio.ByteOrder enumeration.
-
-
Specified by:
-
getByteOrder
in interface
ImageInputStream
-
-
Returns:
-
one of ByteOrder.BIG_ENDIAN or ByteOrder.LITTLE_ENDIAN, indicating which byte order is being used.
-
See Also:
-
ByteOrder
,
ImageInputStream.setByteOrder(java.nio.ByteOrder)
read
public abstract int read()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads a single byte from the stream and returns it as an
int
integer
between 0 and 255. If
EOF
the end of the stream
is reached, -1 is returned.
Subclasses must provide an implementation for this method. The subclass implementation should update the stream position before exiting.
The bit offset within the stream is reset to zero before the read occurs.
The bit offset within the stream must be reset to zero before the read occurs.
-
-
Specified by:
-
read
in interface
ImageInputStream
-
-
Returns:
-
the value of the next byte in the stream, or -1 if EOF is reached.
a byte value from the stream, as an int, or -1 to indicate EOF.
-
Throws:
-
IOException
- if the stream has been closed.
- if an I/O error occurs.
read
public int read(byte[] b)
throws IOException
-
A convenience method that calls read(b, 0, b.length).
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
read
in interface
ImageInputStream
-
-
Parameters:
-
b - an array of bytes to be written to.
-
Returns:
-
the number of bytes actually read, or -1 to indicate EOF.
-
Throws:
-
NullPointerException
- if b is null.
-
IOException
- if an I/O error occurs.
read
public abstract int read(byte[] b,
int off,
int len)
throws IOException
-
Reads up to len bytes from the stream, and stores them into b starting at index off. If no bytes can be read because the end of the stream has been reached, -1 is returned.
The bit offset within the stream must be reset to zero before the read occurs.
Subclasses must provide an implementation for this method. The subclass implementation should update the stream position before exiting.
-
-
Specified by:
-
read
in interface
ImageInputStream
-
-
Parameters:
-
b - an array of bytes to be written to.
-
off - the starting position within b to write to.
-
len - the maximum number of bytes to read.
-
Returns:
-
the number of bytes actually read, or -1 to indicate EOF.
-
Throws:
-
IndexOutOfBoundsException
- if off is negative, len is negative, or off + len is greater than b.length.
-
NullPointerException
- if b is null.
-
IOException
- if an I/O error occurs.
readBytes
public void readBytes(IIOByteBuffer buf,
int len)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads up to len bytes from the stream, and modifies the supplied IIOByteBuffer to indicate the byte array, offset, and length where the data may be found. The caller should not attempt to modify the data found in the IIOByteBuffer.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readBytes
in interface
ImageInputStream
-
-
Parameters:
-
buf - an IIOByteBuffer object to be modified.
-
len - the maximum number of bytes to read.
-
Throws:
-
IOException
- if an I/O error occurs.
readBoolean
public boolean readBoolean()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads a byte from the stream and returns a boolean value of true if it is nonzero, false if it is zero.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readBoolean
in interface
DataInput
-
Specified by:
-
readBoolean
in interface
ImageInputStream
-
-
Returns:
-
a boolean value from the stream.
-
Throws:
-
EOFException
- if the end of the stream is reached.
-
IOException
- if an I/O error occurs.
readByte
public byte readByte()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads a byte from the stream and returns it as a byte value. Byte values between 0x00 and 0x7f represent integer values between 0 and 127. Values between 0x80 and 0xff represent negative values from -128 to /1.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readByte
in interface
DataInput
-
Specified by:
-
readByte
in interface
ImageInputStream
-
-
Returns:
-
a signed byte value from the stream.
-
Throws:
-
EOFException
- if the end of the stream is reached.
-
IOException
- if an I/O error occurs.
readUnsignedByte
public int readUnsignedByte()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads a byte from the stream, and (conceptually) converts it to an int, masks it with 0xff in order to strip off any sign-extension bits, and returns it as a byte value.
Thus, byte values between 0x00 and 0x7f are simply returned as integer values between 0 and 127. Values between 0x80 and 0xff, which normally represent negative bytevalues, will be mapped into positive integers between 128 and 255.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readUnsignedByte
in interface
DataInput
-
Specified by:
-
readUnsignedByte
in interface
ImageInputStream
-
-
Returns:
-
an unsigned byte value from the stream.
-
Throws:
-
EOFException
- if the end of the stream is reached.
-
IOException
- if an I/O error occurs.
readShort
public short readShort()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads two bytes from the stream, and (conceptually) concatenates them according to the current byte order, and returns the result as a short value.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readShort
in interface
DataInput
-
Specified by:
-
readShort
in interface
ImageInputStream
-
-
Returns:
-
a signed short value from the stream.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.getByteOrder()
readUnsignedShort
public int readUnsignedShort()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads two bytes from the stream, and (conceptually) concatenates them according to the current byte order, converts the resulting value to an int, masks it with 0xffff in order to strip off any sign-extension buts, and returns the result as an unsigned int value.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readUnsignedShort
in interface
DataInput
-
Specified by:
-
readUnsignedShort
in interface
ImageInputStream
-
-
Returns:
-
an unsigned short value from the stream, as an int.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.getByteOrder()
readChar
public char readChar()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Equivalent to readUnsignedShort, except that the result is returned using the char datatype.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readChar
in interface
DataInput
-
Specified by:
-
readChar
in interface
ImageInputStream
-
-
Returns:
-
an unsigned char value from the stream.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.readUnsignedShort()
readInt
public int readInt()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads 4 bytes from the stream, and (conceptually) concatenates them according to the current byte order and returns the result as an int.
The bit offset within the stream is ignored and treated as though it were zero.
-
-
Specified by:
-
readInt
in interface
DataInput
-
Specified by:
-
readInt
in interface
ImageInputStream
-
-
Returns:
-
a signed int value from the stream.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.getByteOrder()
readUnsignedInt
public long readUnsignedInt()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads 4 bytes from the stream, and (conceptually) concatenates them according to the current byte order, converts the result to a long, masks it with 0xffffffffL in order to strip off any sign-extension bits, and returns the result as an unsigned long value.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readUnsignedInt
in interface
ImageInputStream
-
-
Returns:
-
an unsigned int value from the stream, as a long.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.getByteOrder()
readLong
public long readLong()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads 8 bytes from the stream, and (conceptually) concatenates them according to the current byte order and returns the result as a long.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readLong
in interface
DataInput
-
Specified by:
-
readLong
in interface
ImageInputStream
-
-
Returns:
-
a signed long value from the stream.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.getByteOrder()
readFloat
public float readFloat()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads 4 bytes from the stream, and (conceptually) concatenates them according to the current byte order and returns the result as a float.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFloat
in interface
DataInput
-
Specified by:
-
readFloat
in interface
ImageInputStream
-
-
Returns:
-
a float value from the stream.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.getByteOrder()
readDouble
public double readDouble()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads 8 bytes from the stream, and (conceptually) concatenates them according to the current byte order and returns the result as a double.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readDouble
in interface
DataInput
-
Specified by:
-
readDouble
in interface
ImageInputStream
-
-
Returns:
-
a double value from the stream.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.getByteOrder()
readLine
public String readLine()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads the next line of text from the input stream. It reads successive bytes, converting each byte separately into a character, until it encounters a line terminator or end of file; the characters read are then returned as a String. Note that because this method processes bytes, it does not support input of the full Unicode character set.
If end of file is encountered before even one byte can be read, then null is returned. Otherwise, each byte that is read is converted to type char by zero-extension. If the character '\n' is encountered, it is discarded and reading ceases. If the character '\r' is encountered, it is discarded and, if the following byte converts to the character '\n', then that is discarded also; reading then ceases. If end of file is encountered before either of the characters '\n' and '\r' is encountered, reading ceases. Once reading has ceased, a String is returned that contains all the characters read and not discarded, taken in order. Note that every character in this string will have a value less than \u0100, that is, (char)256.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readLine
in interface
DataInput
-
Specified by:
-
readLine
in interface
ImageInputStream
-
-
Returns:
-
a String containing a line of text from the stream.
-
Throws:
-
IOException
- if an I/O error occurs.
readUTF
public String readUTF()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads in a string that has been encoded using a
modified UTF-8
format. The general contract of readUTF is that it reads a representation of a Unicode character string encoded in modified UTF-8 format; this string of characters is then returned as a String.
First, two bytes are read and used to construct an unsigned 16-bit integer in the manner of the readUnsignedShort method, using network byte order (regardless of the current byte order setting). This integer value is called the
UTF length
and specifies the number of additional bytes to be read. These bytes are then converted to characters by considering them in groups. The length of each group is computed from the value of the first byte of the group. The byte following a group, if any, is the first byte of the next group.
If the first byte of a group matches the bit pattern 0xxxxxxx (where x means "may be 0 or 1"), then the group consists of just that byte. The byte is zero-extended to form a character.
If the first byte of a group matches the bit pattern 110xxxxx, then the group consists of that byte a and a second byte b. If there is no byte b (because byte a was the last of the bytes to be read), or if byte b does not match the bit pattern 10xxxxxx, then a UTFDataFormatException is thrown. Otherwise, the group is converted to the character:
(char)(((a& 0x1F) << 6) | (b & 0x3F))
If the first byte of a group matches the bit pattern 1110xxxx, then the group consists of that byte a and two more bytes b and c. If there is no byte c (because byte a was one of the last two of the bytes to be read), or either byte b or byte c does not match the bit pattern 10xxxxxx, then a UTFDataFormatException is thrown. Otherwise, the group is converted to the character:
(char)(((a & 0x0F) << 12) | ((b & 0x3F) << 6) | (c & 0x3F))
If the first byte of a group matches the pattern 1111xxxx or the pattern 10xxxxxx, then a UTFDataFormatException is thrown.
If end of file is encountered at any time during this entire process, then an EOFException is thrown.
After every group has been converted to a character by this process, the characters are gathered, in the same order in which their corresponding groups were read from the input stream, to form a String, which is returned.
The current byte order setting is ignored.
The bit offset within the stream is reset to zero before the read occurs.
Note: This method should not be used in the implementation of image formats that use standard UTF-8, because the modified UTF-8 used here is incompatible with standard UTF-8.
-
-
Specified by:
-
readUTF
in interface
DataInput
-
Specified by:
-
readUTF
in interface
ImageInputStream
-
-
Returns:
-
a String read from the stream.
-
Throws:
-
EOFException
- if this stream reaches the end before reading all the bytes.
-
UTFDataFormatException
- if the bytes do not represent a valid modified UTF-8 encoding of a string.
-
IOException
- if an I/O error occurs.
readFully
public void readFully(byte[] b,
int off,
int len)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads len bytes from the stream, and stores them into b starting at index off. If the end of the stream is reached, an EOFException will be thrown.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFully
in interface
DataInput
-
Specified by:
-
readFully
in interface
ImageInputStream
-
-
Parameters:
-
b - an array of bytes to be written to.
-
off - the starting position within b to write to.
-
len - the maximum number of bytes to read.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
readFully
public void readFully(byte[] b)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads b.length bytes from the stream, and stores them into b starting at index 0. If the end of the stream is reached, an EOFException will be thrown.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFully
in interface
DataInput
-
Specified by:
-
readFully
in interface
ImageInputStream
-
-
Parameters:
-
b - an array of bytes.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
readFully
public void readFully(short[] s,
int off,
int len)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads len shorts (signed 16-bit integers) from the stream according to the current byte order, and stores them into s starting at index off. If the end of the stream is reached, an EOFException will be thrown.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFully
in interface
ImageInputStream
-
-
Parameters:
-
s - an array of shorts to be written to.
-
off - the starting position withinb to write to.
-
len - the maximum number of shorts to read.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
readFully
public void readFully(char[] c,
int off,
int len)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads len chars (unsigned 16-bit integers) from the stream according to the current byte order, and stores them into c starting at index off. If the end of the stream is reached, an EOFException will be thrown.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFully
in interface
ImageInputStream
-
-
Parameters:
-
c - an array of chars to be written to.
-
off - the starting position withinb to write to.
-
len - the maximum number of chars to read.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
readFully
public void readFully(int[] i,
int off,
int len)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads len ints (signed 32-bit integers) from the stream according to the current byte order, and stores them into i starting at index off. If the end of the stream is reached, an EOFException will be thrown.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFully
in interface
ImageInputStream
-
-
Parameters:
-
i - an array of ints to be written to.
-
off - the starting position withinb to write to.
-
len - the maximum number of ints to read.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
readFully
public void readFully(long[] l,
int off,
int len)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads len longs (signed 64-bit integers) from the stream according to the current byte order, and stores them into l starting at index off. If the end of the stream is reached, an EOFException will be thrown.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFully
in interface
ImageInputStream
-
-
Parameters:
-
l - an array of longs to be written to.
-
off - the starting position withinb to write to.
-
len - the maximum number of longs to read.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
readFully
public void readFully(float[] f,
int off,
int len)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads len floats (32-bit IEEE single-precision floats) from the stream according to the current byte order, and stores them into f starting at index off. If the end of the stream is reached, an EOFException will be thrown.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFully
in interface
ImageInputStream
-
-
Parameters:
-
f - an array of floats to be written to.
-
off - the starting position withinb to write to.
-
len - the maximum number of floats to read.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
readFully
public void readFully(double[] d,
int off,
int len)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads len doubles (64-bit IEEE double-precision floats) from the stream according to the current byte order, and stores them into d starting at index off. If the end of the stream is reached, an EOFException will be thrown.
The bit offset within the stream is reset to zero before the read occurs.
-
-
Specified by:
-
readFully
in interface
ImageInputStream
-
-
Parameters:
-
d - an array of doubles to be written to.
-
off - the starting position withinb to write to.
-
len - the maximum number of doubles to read.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bytes.
-
IOException
- if an I/O error occurs.
getStreamPosition
public long getStreamPosition()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Returns the current byte position of the stream. The next read will take place starting at this offset.
-
-
Specified by:
-
getStreamPosition
in interface
ImageInputStream
-
-
Returns:
-
a long containing the position of the stream.
-
Throws:
-
IOException
- if an I/O error occurs.
getBitOffset
public int getBitOffset()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Returns the current bit offset, as an integer between 0 and 7, inclusive. The bit offset is updated implicitly by calls to the readBits method. A value of 0 indicates the most-significant bit, and a value of 7 indicates the least significant bit, of the byte being read.
The bit offset is set to 0 when a stream is first opened, and is reset to 0 by calls to seek, skipBytes, or any read or readFully method.
-
-
Specified by:
-
getBitOffset
in interface
ImageInputStream
-
-
Returns:
-
an int containing the bit offset between 0 and 7, inclusive.
-
Throws:
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.setBitOffset(int)
setBitOffset
public void setBitOffset(int bitOffset)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Sets the bit offset to an integer between 0 and 7, inclusive. The byte offset within the stream, as returned by getStreamPosition, is left unchanged. A value of 0 indicates the most-significant bit, and a value of 7 indicates the least significant bit, of the byte being read.
-
-
Specified by:
-
setBitOffset
in interface
ImageInputStream
-
-
Parameters:
-
bitOffset - the desired offset, as an int between 0 and 7, inclusive.
-
Throws:
-
IOException
- if an I/O error occurs.
-
See Also:
-
ImageInputStream.getBitOffset()
readBit
public int readBit()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads a single bit from the stream and returns it as an int with the value 0 or 1. The bit offset is advanced by one and reduced modulo 8.
-
-
Specified by:
-
readBit
in interface
ImageInputStream
-
-
Returns:
-
an int containing the value 0 or 1.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bits.
-
IOException
- if an I/O error occurs.
readBits
public long readBits(int numBits)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Reads a bitstring from the stream and returns it as a long, with the first bit read becoming the most significant bit of the output. The read starts within the byte indicated by getStreamPosition, at the bit given by getBitOffset. The bit offset is advanced by numBits and reduced modulo 8.
The byte order of the stream has no effect on this method. The return value of this method is constructed as though the bits were read one at a time, and shifted into the right side of the return value, as shown by the following pseudo-code:
long accum = 0L;
for (int i = 0; i < numBits; i++) {
accum <<= 1; // Shift left one bit to make room
accum |= readBit();
}
Note that the result of readBits(32) may thus not be equal to that of readInt() if a reverse network byte order is being used (i.e., getByteOrder() == false).
If the end of the stream is encountered before all the bits have been read, an EOFException is thrown.
-
-
Specified by:
-
readBits
in interface
ImageInputStream
-
-
Parameters:
-
numBits - the number of bits to read, as an int between 0 and 64, inclusive.
-
Returns:
-
the bitstring, as a long with the last bit read stored in the least significant bit.
-
Throws:
-
EOFException
- if the stream reaches the end before reading all the bits.
-
IOException
- if an I/O error occurs.
length
public long length()
-
Returns -1L to indicate that the stream has unknown length. Subclasses must override this method to provide actual length information.
-
-
Specified by:
-
length
in interface
ImageInputStream
-
-
Returns:
-
-1L to indicate unknown length.
skipBytes
public int skipBytes(int n)
throws IOException
-
Advances the current stream position by calling seek(getStreamPosition() + n).
The bit offset is reset to zero.
-
-
Specified by:
-
skipBytes
in interface
DataInput
-
Specified by:
-
skipBytes
in interface
ImageInputStream
-
-
Parameters:
-
n - the number of bytes to seek forward.
-
Returns:
-
an int representing the number of bytes skipped.
-
Throws:
-
IOException
- if getStreamPosition throws an IOException when computing either the starting or ending position.
skipBytes
public long skipBytes(long n)
throws IOException
-
Advances the current stream position by calling seek(getStreamPosition() + n).
The bit offset is reset to zero.
-
-
Specified by:
-
skipBytes
in interface
ImageInputStream
-
-
Parameters:
-
n - the number of bytes to seek forward.
-
Returns:
-
a long representing the number of bytes skipped.
-
Throws:
-
IOException
- if getStreamPosition throws an IOException when computing either the starting or ending position.
seek
public void seek(long pos)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Sets the current stream position to the desired location. The next read will occur at this location. The bit offset is set to 0.
An IndexOutOfBoundsException will be thrown if pos is smaller than the flushed position (as returned by getflushedPosition).
It is legal to seek past the end of the file; an EOFException will be thrown only if a read is performed.
-
-
Specified by:
-
seek
in interface
ImageInputStream
-
-
Parameters:
-
pos - a long containing the desired file pointer position.
-
Throws:
-
IOException
- if any other I/O error occurs.
mark
public void mark()
-
Pushes the current stream position onto a stack of marked positions.
-
-
Specified by:
-
mark
in interface
ImageInputStream
-
reset
public void reset()
throws IOException
-
Resets the current stream byte and bit positions from the stack of marked positions.
An IOException will be thrown if the previous marked position lies in the discarded portion of the stream.
-
-
Specified by:
-
reset
in interface
ImageInputStream
-
-
Throws:
-
IOException
- if an I/O error occurs.
flushBefore
public void flushBefore(long pos)
throws IOException
-
Description copied from interface:
ImageInputStream
-
Discards the initial portion of the stream prior to the indicated postion. Attempting to seek to an offset within the flushed portion of the stream will result in an IndexOutOfBoundsException.
Calling flushBefore may allow classes implementing this interface to free up resources such as memory or disk space that are being used to store data from the stream.
-
-
Specified by:
-
flushBefore
in interface
ImageInputStream
-
-
Parameters:
-
pos - a long containing the length of the
stream
file
prefix that may be flushed. -
Throws:
-
IOException
- if an I/O error occurs.
flush
public void flush()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Discards the initial position of the stream prior to the current stream position. Equivalent to flushBefore(getStreamPosition()).
-
-
Specified by:
-
flush
in interface
ImageInputStream
-
-
Throws:
-
IOException
- if an I/O error occurs.
getFlushedPosition
public long getFlushedPosition()
-
Description copied from interface:
ImageInputStream
-
Returns the earliest position in the stream to which seeking may be performed. The returned value will be the maximum of all values passed into previous calls to flushBefore.
-
-
Specified by:
-
getFlushedPosition
in interface
ImageInputStream
-
-
Returns:
-
the earliest legal position for seeking, as a long.
isCached
public boolean isCached()
-
Default implementation returns false. Subclasses should override this if they cache data.
-
-
Specified by:
-
isCached
in interface
ImageInputStream
-
-
Returns:
-
true if this ImageInputStream caches data.
-
See Also:
-
ImageInputStream.isCachedMemory()
,
ImageInputStream.isCachedFile()
isCachedMemory
public boolean isCachedMemory()
-
Default implementation returns false. Subclasses should override this if they cache data in main memory.
-
-
Specified by:
-
isCachedMemory
in interface
ImageInputStream
-
-
Returns:
-
true if this ImageInputStream caches data in main memory.
-
See Also:
-
ImageInputStream.isCached()
,
ImageInputStream.isCachedFile()
isCachedFile
public boolean isCachedFile()
-
Default implementation returns false. Subclasses should override this if they cache data in a temporary file.
-
-
Specified by:
-
isCachedFile
in interface
ImageInputStream
-
-
Returns:
-
true if this ImageInputStream caches data in a temporary file.
-
See Also:
-
ImageInputStream.isCached()
,
ImageInputStream.isCachedMemory()
close
public void close()
throws IOException
-
Description copied from interface:
ImageInputStream
-
Closes the stream. Attempts to access a stream that has been closed may result in IOExceptions or incorrect behavior. Calling this method may allow classes implementing this interface to release resources associated with the stream such as memory, disk space, or file descriptors.
-
-
Specified by:
-
close
in interface
ImageInputStream
-
-
Throws:
-
IOException
- if an I/O error occurs.
finalize
protected void finalize()
throws Throwable
-
Finalizes this object prior to garbage collection. The close method is called to close any open input source. This method should not be called from application code.
-
-
Overrides:
-
finalize
in class
Object
-
-
Throws:
-
Throwable
- if an error occurs during superclass finalization.