|
Sun Adapter for Batch/FTP | ||||||||
| PREV NEXT | FRAMES NO FRAMES | ||||||||
BatchInboundException
with the specified detail message.
dir
path
to the group specified as gid;
path
to the mode as specified permissions;
Changes the access permissions or modes of the specified file or directory.
path
to the user as specified uid;
file
RemoteDirectory and RemoteFile
dir
path
RemoteDirectory and RemoteFile
to local file (destination) specified by configuration parameters
LocalDirectory and LocalFile, LocalFile
is mandatory, i.e., data must be transferred into a local file, download() will
not put data in payload;
RemoteDirectory and RemoteFile) to the local
machine;
depends on the current status of the configuration, the remote data
could be stored into the payload (in memory buffer) or a local file
specified by configuration parameters LocalDirectory
and LocalFile;
Note, the remote could be a folder - in this case, if the configuration parameter
Recursive is "Yes" - the folder hierarchy is copied to the
local destination;
RemoteDirectory and RemoteFile) to the local
machine through sftp;
Note, the remote SSH server must have sftp sub system enabled;
depends on the current status of the configuration, the remote data
could be stored into the payload (in memory buffer) or a local file
specified by configuration parameters LocalDirectory
and LocalFile;
RemoteDirectory and RemoteFile) to the local
machine through sftp;
Note, the remote SSH server must have sftp sub system enabled;
depends on the current status of the configuration, the remote data
could be stored into the payload (in memory buffer) or a local file
specified by configuration parameters LocalDirectory
and LocalFile;
if there are pre and post operations configured, they will be applied
before and after the get operation respectively;
RemoteDirectory and RemoteFile) to the local
machine;
depends on the current status of the configuration, the remote data
could be stored into the payload (in memory buffer) or a local file
specified by configuration parameters LocalDirectory
and LocalFile, the remote data goes into payload when both
LocalDirectory and LocalFile are left blank;
RemoteDirectory and RemoteFile) to the local
machine;
depends on the current status of the configuration, the remote data
could be stored into the payload (in memory buffer) or a local file
specified by configuration parameters LocalDirectory
and LocalFile, the remote data goes into payload when both
LocalDirectory and LocalFile are left blank;
if there are pre and post operations configured,
they will be applied before and after the get operation respectively;
GUIDFileName the UUID prefixed file name (GUIDFileName) where the inbound target file's content
can be read from as the payload of the inbound message
PathDirName the directory where the inbound local file resides
OriginalFileName the inbound local file before it is prefixed with the UUID
listDir() or listDirLong();
listDir() or listDirLong();
LocalDirName;
LocalDirName;
LocalDirName;
LocalDirName;
LocalDirName is a batch name pattern
or not.
LocalDirName is a batch name pattern
or not.
LocalDirName is a batch name pattern
or not.
LocalDirName is a batch name pattern
or not.
LocalFileName;
LocalFileName;
LocalFileName;
LocalFileName;
LocalFileName is a batch name pattern
or not;
LocalFileName is a batch name pattern
or not;
LocalFileName is a batch name pattern
or not;
LocalFileName is a batch name pattern
or not;
Recursive
set to "Yes"
RemoteDirName;
RemoteDirName;
RemoteDirName;
RemoteDirName;
RemoteDirName is a batch name pattern
or not.
RemoteDirName is a batch name pattern
or not.
RemoteDirName is a batch name pattern
or not.
RemoteDirName is a batch name pattern
or not.
RemoteFileName;
RemoteFileName;
RemoteFileName;
RemoteFileName;
RemoteFileName is a batch name pattern
or not;
RemoteFileName is a batch name pattern
or not;
RemoteFileName is a batch name pattern
or not;
RemoteFileName is a batch name pattern
or not;
path is absolute
dir
hasEntry, nextEntry(),
resetEntries(), getEntry(i),
getEntryCount()
RemoteDirectory and RemoteFile
only file name is available - use listDirLong()
for time tamp and size information;
use methods:
hasEntry(), getEntry(index), nextEntry(), getEntryCount(), resetEntries()
to access the entries;
RemoteDirectory and RemoteFile
file name, is directory flag and time stamp and size information
is available - use listDir()
for name only entries;
use methods:
hasEntry(), getEntry(index), nextEntry(), getEntryCount(), resetEntries()
to access the entries;
RemoteDirectory;
dir
dir;
dir
dirs, dirs
can have more than one path components, which
can be relative or absolute;
LocalDirectory
and LocalFile) to the remote SSH server file specified by
specified by configuration parameters
RemoteDirectory and RemoteFile;
depends on the current status of the configuration, the local data
could be from payload or a local file;
Note, the local could be a folder - in this case, if the configuration parameter
Recursive is "Yes" - the folder hierarchy is copied to the
remote destination;
LocalDirectory
and LocalFile) to the remote SSH server file specified by
specified by configuration parameters
RemoteDirectory and RemoteFile
through sftp;
Note, the remote SSH server must have sftp sub system enabled;
depends on the current status of the configuration, the local data
could be from payload or a local file;
LocalDirectory
and LocalFile) to the remote SSH server file specified by
specified by configuration parameters
RemoteDirectory and RemoteFile
through sftp;
Note, the remote SSH server must have sftp sub system enabled;
depends on the current status of the configuration, the local data
could be from payload or a local file;
if there are pre and post operations configured, they will be applied
before and after the put operation respectively;
LocalDirectory
and LocalFile) to the remote FTP server file specified by
specified by configuration parameters
RemoteDirectory and RemoteFile;
depends on the current status of the configuration, the local data
could be from payload (if parameters LocalDirectory
and LocalFile are left blank) or a local file (if parameters LocalDirectory
and LocalFile are specified);
LocalDirectory
and LocalFile) to the remote FTP server file specified by
specified by configuration parameters
RemoteDirectory and RemoteFile;
depends on the current status of the configuration, the local data
could be from payload (if parameters LocalDirectory
and LocalFile are left blank) or a local file (if parameters LocalDirectory
and LocalFile are specified);
if there are pre and post operations configured,
they will be applied before and after the put operation respectively.
Recursive
set to "Yes"
oldPath to a new remote path
newPath;
RemoteDirectory and RemoteFile
to a new remote path newPath;
RemoteDirectory and RemoteFile
to a new name specified by parameter newPath;
path is absolute, the source file represented by :
Remote Directory / Remote File will be moved to the destination file,
when it is relative, it is relative to the login home directory
if the destination directory does not exist, it is created.
nextEntry() will return the first entry
in the list;
nextEntry() will return the first entry
in the list;
cmd;
cmd;
cmd;
cmd;
LocalDirName is a batch name pattern;
LocalDirName is a batch name pattern;
LocalDirName is a batch name pattern;
LocalDirName is a batch name pattern;
LocalFileName is a name pattern;
LocalFileName is a name pattern;
LocalFileName is a name pattern;
LocalFileName is a name pattern;
newPayload
newPayload
newPayload
cmd;
cmd;
cmd;
cmd;
RemoteDirName.
RemoteDirName.
RemoteDirName.
RemoteDirName.
RemoteDirName is a batch name pattern;
RemoteDirName is a batch name pattern;
RemoteDirName is a batch name pattern;
RemoteDirName is a batch name pattern;
RemoteFileName
as Post Transfer operation parameter.
RemoteFileName
as Pre Transfer operation parameter.
RemoteFileName
as Post Transfer operation parameter.
RemoteFileName
as Pre Transfer operation parameter.
RemoteFileName is a name pattern;
RemoteFileName is a name pattern;
RemoteFileName is a name pattern;
RemoteFileName is a name pattern;
s, should not be invoked directly from user collaboration;
s, should not be invoked directly from user collaboration;
path
String.
LocalDirectory and LocalFile
to remote destination file specified by configuration parameters
RemoteDirectory and RemoteFile, LocalFile
is mandatory, i.e., for upload(), data to be transferred must be from
a local file, upload() does not take payload;
|
Sun Adapter for Batch/FTP | ||||||||
| PREV NEXT | FRAMES NO FRAMES | ||||||||