Oracle ACFS Command-Line Tools for Encryption

Table 13-64 contains a summary of the commands for Oracle ACFS encryption.

You can use acfsutil help on all platforms to display help text. You run acfsutil version on all platforms to display the Oracle ACFS version.

Table 13-64 Summary of commands for Oracle ACFS encryption

Command	Description
acfsutil encr info	Displays encryption-related information about Oracle ACFS file systems.
acfsutil encr init	Creates storage for encryption keys.
acfsutil encr off	Disables encryption for an Oracle ACFS file system.
acfsutil encr on	Encrypts an Oracle ACFS file system.
acfsutil encr rekey	Generates a new key and re-encrypts an Oracle ACFS file system.
acfsutil encr set	Sets or changes encryption parameters for an Oracle ACFS file system.

acfsutil encr info

Purpose

Displays encryption-related information about Oracle ACFS file systems, directories, or files.

Syntax and Description

acfsutil encr info -m mount_point [[-r] path [path…]]

acfsutil encr info -h displays help text and exits.

Table 13-65 contains the options available with the acfsutil encr info command.

Table 13-65 Options for the acfsutil encr info command

Option	Description
`-m` `mount_point`	Specifies the directory where the file system is mounted.
`-r`	Specifies recursive action under an existing directory folder identified by `path`.
`path`	Specifies the absolute or relative path of a directory. Multiple path values are allowed.

If -m is specified without a path, the encryption status, algorithm, and key length are displayed for the file system level.

If -r is specified with a path, the encryption status, algorithm, and key length are displayed for all objects under the directory specified by path.

Any user can run this command to display encryption information about a file system, directory, or file.

Examples

The following are examples of the use of acfsutil encr info.

Example 13-58 Using the acfsutil encr info command

# /sbin/acfsutil encr info -m /u01/app/acfsmounts/myacfs

# /sbin/acfsutil encr info -m /u01/app/acfsmounts/myacfs 
                           -r /u01/app/acfsmounts/myacfs/myfiles

acfsutil encr init

Purpose

Creates storage for encryption keys.

Syntax and Description

acfsutil encr init [-p ]

acfsutil encr init -h displays help text and exits.

Table 13-66 contains the options available with the acfsutil encr init command.

Table 13-66 Options for the acfsutil encr init command

Option	Description
`-p`	Creates PKCS (password-protected) storage for keys.

The acfsutil encr init command must be run before any other encryption acfsutil commands can be run. This command must be run once for each cluster on which Oracle ACFS encryption is run.

If the -p option is specified, you must provide a password when prompted. The password must conform to the format that is described in "acfsutil sec init".

If the -p option is not specified, a single sign-on (SSO) wallet is created.

Only a user with root or system administrator privileges can run this command.

Examples

The following is an example of the use of acfsutil encr init.

Example 13-59 Using the acfsutil encr init command

# /sbin/acfsutil encr init

acfsutil encr off

Purpose

Disables encryption for an Oracle ACFS file system, directories, or individual files.

Syntax and Description

acfsutil encr off -m mount_point [[-r] path [ path...]]

acfsutil encr off -h displays help text and exits.

Table 13-68 contains the options available with the acfsutil encr off command.

Table 13-67 Options for the acfsutil encr off command

Option	Description
`-m` `mount_point`	Specifies the directory where the file system is mounted.
`-r`	Specifies to disable encryption recursively under an existing directory identified by `path`.
`path`	Specifies the absolute or relative path of a directory. Multiple path values are allowed.

This command cannot be run on security realm-protected files.

Only an administrator can run this command on an Oracle ACFS file system (-m option without a path specified). When the -m option is specified without a path, all the files under the mount point are decrypted.

Only a user with root or system administrator privileges can run this command to disable encryption on a file system. The file owner can also run this command to disable encryption on a directory or file.

Examples

The following are examples of the use of acfsutil encr off.

Example 13-60 Using the acfsutil encr off command

# /sbin/acfsutil encr off -m /u01/app/acfsmounts/myacfs

# /sbin/acfsutil encr off -m /u01/app/acfsmounts/myacfs
                          -r /u01/app/acfsmounts/myacfs/myfiles

acfsutil encr on

Purpose

Encrypts an Oracle ACFS file system, directories, or individual files.

Syntax and Description

acfsutil encr on -m mount_point
[-a {AES} -k {128|192|256}] [[-r] path [ path...]]

acfsutil encr on -h displays help text and exits.

Table 13-68 contains the options available with the acfsutil encr on command.

Table 13-68 Options for the acfsutil encr on command

Option	Description
`-m` `mount_point`	Specifies the directory where the file system is mounted.
`-a` `algorithm`	Specifies the encryption algorithm type for a directory or file. Advanced Encryption Standard (AES) is the only encryption algorithm supported for this release.
`-k` `key_length`	Specifies the encryption key length for a directory or file.
`-r`	Specifies encryption recursively under existing directory folder identified by `path`.
`path`	Specifies the absolute or relative path of a directory. Multiple path values are allowed.

This command cannot be run on realm-protected files.

The default values for the -a and -k are determined by the volume parameters specified when acfsutil encr set was run. To set the key length at the volume level, use the acfsutil encr set command.

Only a user with root or system administrator privileges can run this command to enable encryption on a file system. The file owner can also run this command to enable encryption on a directory or file.

Examples

The following are examples of the use of acfsutil encr on.

Example 13-61 Using the acfsutil encr on command

# /sbin/acfsutil encr on -m /u01/app/acfsmounts/myacfs

# /sbin/acfsutil encr on -m /u01/app/acfsmounts/myacfs
                         -a AES -k 128 -r /u01/app/acfsmounts/myacfs/myfiles

acfsutil encr rekey

Purpose

Generates a new key and re-encrypts volume or file.

Syntax and Description

acfsutil encr rekey -m mount_point
{-f [-r] path [path…] |-v } [-a {AES} -k {128|192 |256}]

acfsutil encr rekey -h displays help text and exits.

Table 13-69 contains the options available with the acfsutil encr rekey command.

Table 13-69 Options for the acfsutil encr rekey command

Option	Description
`-m` `mount_point`	Specifies the directory where the file system is mounted.
`-f` [`-r`] `path` ...	Generates a new file encryption key for the specified path and then encrypts the data with the new key. If -r is specified, the rekey operation is performed recursively under `path`. `path` specifies the absolute or relative path of a directory. Multiple path values are allowed.
`-v`	Generates a new volume encryption key (VEK) for the specified mount point and then encrypts all the file encryption keys in file system with the new key. Prompts for the wallet password because the wallet must be accessed to store the new VEK.
`-a` `algorithm`	Specifies the algorithm. Advanced Encryption Standard (AES) is the only encryption supported for this release.
`-k` `key_length`	Specifies the key length for the directory or file specified by `path`.

This command cannot be run on security realm-protected files.

The default values for the -a and -k are determined by the volume parameters specified when acfsutil encr set was run.

Only a user with root or system administrator privileges can run this command with the -v option. The file owner can also run this command with the -f option to rekey encryption on the directory or file.

Examples

The following are examples of the use of acfsutil encr rekey.

Example 13-62 Using the acfsutil encr rekey command

# /sbin/acfsutil encr rekey -m /u01/app/acfsmounts/myacfs -v

# /sbin/acfsutil encr rekey -m /u01/app/acfsmounts/myacfs -f
                            -r /u01/app/acfsmounts/myacfs/myfiles

acfsutil encr set

Purpose

Sets or changes encryption parameters for an Oracle ACFS file system.

Syntax and Description

acfsutil encr set [-a {AES } -k {128|192|256} | -u] -m mount_point

acfsutil encr set -h displays help text and exits.

Table 13-70 contains the options available with the acfsutil encr set command.

Table 13-70 Options for the acfsutil encr set command

Option	Description
`-a` `algorithm`	Specifies the algorithm. Advanced Encryption Standard (`AES`) is the default value and the only encryption supported for this release. The algorithm must be specified if `-k` is specified.
`-k` {`128`\|`192`\|`256`}	Specifies the key length. The key length is set at the volume level. The default is `192`. Must be specified if `-a` is specified.
`-u`	Backs out encryption. Decrypts all encrypted files in the file system and reverts the file system to the state before `acfsutil` `encr` `set` was run on the file system. If security is being used, then this command can only be run after security has been backed out. To remove security, refer to "acfsutil sec prepare".
`-m` `mount_point`	Specifies the directory where the file system is mounted.

Before running the acfsutil encr set command, you must first run the acfsutil encr init command.

The acfsutil encr set command configures encryption parameters for a file system, transparently generates a volume encryption key, and stores that the generated key in the key store that was previously configured with the acfsutil encr init command.

In addition acfsutil encr set creates the mount_point/.Security/encryption/logs/ directory that contains the log file (encr-host_name.log) that collects auditing and diagnostic data.

Password requirements when storing the key are dependent on how the encryption key storage was configured. If -p was specified with acfsutil encr init, then a password is required to run this command.

Only a user with root or system administrator privileges can run the acfsutil encr set command.

Examples

The following example shows the use of acfsutil encr set command.

Example 13-63 Using the acfsutil encr set command

# /sbin/acfsutil encr set -a AES -k 256 -m /u01/app/acfsmounts/myacfs