This chapter describes issues related to the Sun Blade X6220 server module documentation.
Fixed Documentation Issues
Service Manual Does Not Have a Complete Description of HDD LED Activity Status (6686568)
The following information has been added to the Sun BladeX6220 Server Module Service Manual.
The correct behavior for all HDD activity LEDs is as follows:
- Power ON (HDD is operational but not active) = green steady on
- Drive actively reading/writing = green on but flickering OFF commensurate with activity
- Drive building a RAID array (or any other normal transitory activity) = green slow blink (1 Hz @ 50% duty cycle)
- Power off = no light
This section, External Status LEDs, of the Sun Blade X6220 Server Module Service Manual 820-0046 has been corrected.
References to Integrated Lights Out Manager (ILOM) Documentation
You will need to refer to specific documentation for the ILOM, depending on which ILOM version you are using.
TABLE 1 ILOM Documentation
|
ILOM Version
|
Reference Documents
|
|
1.1.x
|
- Integrated Lights Out Manager (ILOM) Administration Guide for ILOM 1.1.1
- Integrated Lights Out Manager (ILOM) Supplement for Sun Blade X6220 Server Module
|
|
2.0.x
|
Sun Integrated Lights Out Manager 2.0 User’s Guide
|
|
3.0
|
- Sun Integrated Lights Out Manager 3.0 User’s Guide
- Integrated Lights Out Manager 3.0 (ILOM) Supplement for Sun Blade X6220 Server Module
|
The listed documents are posted on the product documentation site at:
http://docs.sun.com/app/docs/prod/blade.x6220
| Sun Blade X6220 Server Module Product Notes
|
820-0048-18
|
    |
Copyright © 2009 Sun Microsystems, Inc. All rights reserved.