Figures |
FIGURE 1-1 Server Module Front Panel
FIGURE 1-2 Server Module Replaceable Component Locations
FIGURE 1-3 The Location of the FRU ID Label
FIGURE 1-4 Dongle Cable Connections
FIGURE 2-1 Power Button and Power/OK LED Location
FIGURE 2-2 Ethernet Port Chassis Labeling Designations
FIGURE 2-3 Server Module BIOS Configuration Utility Menu Tree
FIGURE 2-4 BIOS Setup Menu Main Screen
FIGURE 2-5 BIOS Setup Menu Advanced Screen
FIGURE 2-6 BIOS Setup Menu Advanced Configure CPU Screen
FIGURE 2-7 BIOS Setup Menu Advanced Memory Screen
FIGURE 2-8 BIOS Setup Menu Advanced IDE Configuration Screen
FIGURE 2-9 BIOS Setup Menu Advanced Super I/O Screen
FIGURE 2-10 BIOS Setup Menu Advanced Trusted Computing Screen
FIGURE 2-11 BIOS Setup Menu Advanced USB Configuration Screen
FIGURE 2-12 BIOS Setup Menu Advanced PCI Configuration Screen
FIGURE 2-13 BIOS Setup Menu Advanced MPS Configuration Screen
FIGURE 2-14 BIOS Setup Menu Advanced Event Logging Screen
FIGURE 2-15 BIOS Setup Menu Boot Screen
FIGURE 2-16 BIOS Setup Menu Boot Configuration Screen
FIGURE 2-17 BIOS Setup Menu Boot Device Priority Screen
FIGURE 2-18 BIOS Setup Menu Boot Hard Disk Drives Screen
FIGURE 2-19 BIOS Setup Menu Server Screen
FIGURE 2-20 BIOS Setup Menu Server LAN Configuration Screen
FIGURE 2-21 BIOS Setup Menu Server Remote Access Configuration Screen
FIGURE 2-22 BIOS Setup Menu Server Reset BMC Password Screen
FIGURE 2-23 BIOS Setup Menu Security Change Supervisor Password Screen
FIGURE 2-24 BIOS Setup Menu Exit Screen
FIGURE 2-25 BIOS Setup Menu Exit Load Optimal Defaults Screen
FIGURE 2-26 BIOS Setup Menu Exit Load Failsafe Defaults Screen
FIGURE 2-27 Location of J42 on the Motherboard With Pin 1 Shown
FIGURE 2-28 Pinout for Jumper J42 and the Caps in the Safe Position
FIGURE 2-29 J42 With the Jumper Set to Reset the BIOS Password.
FIGURE 2-30 J42 With the Jumper Set to Clear the CMOS Password.
FIGURE 2-31 J42 With the Jumpers Set to Reset the BIOS Password and Clear the CMOS Password.
FIGURE 2-32 Location of Jumpers J19 and J44 on the Motherboard.
FIGURE 2-33 The Location and Default Setting of J51
FIGURE 3-1 External LEDs
FIGURE 3-2 The Components Submenu Tabs
FIGURE 3-3 Removing a Server Module
FIGURE 3-4 Removing the Main Cover
FIGURE 3-5 Inserting the server module.
FIGURE 3-6 CPU and DIMM Fault Reminder LEDs
FIGURE 3-7 Removing the Battery
FIGURE 3-8 Replacing the Compact Flash
FIGURE 3-9 DIMM Numbering and Position
FIGURE 3-10 Removing a DIMM
FIGURE 3-11 Installing a DIMM with Slot Alignment Key
FIGURE 3-12 The Internal Numbering Designation of the CPUs and the CPU Fault LEDs
FIGURE 3-13 Removing the Heatsink and CPU
FIGURE 3-14 Replacing the CPU
FIGURE 3-15 Installing a RAID Expansion Module Battery
FIGURE 3-16 Removing the Cap From the REM Connector
FIGURE 3-17 Routing the Cable and Installing the RAID Expansion Module
FIGURE 3-18 Removing a RAID Expansion Module
FIGURE 3-19 Removing the connector cap
FIGURE 3-20 Installation of a Fabric Expansion Module
FIGURE 3-21 Removing a Fabric Expansion Module
FIGURE 3-22 SSD Cable Routing and Connectors
FIGURE 3-23 Installation of the SSD Mounting Bracket
FIGURE 3-24 Installation of the SSD
FIGURE 3-25 Removal of the SSD Cable
FIGURE 3-26 Removal of the SSD
Copyright © 2009 Sun Microsystems, Inc. All rights reserved.