Configuring a Terminal

This section describes how to modify the terminal configuration to allow a PPP connection without login.

Configuring a Terminal

1. Become superuser:

   host% su Password: root password

2. Start admintool.

3. Select Serial Ports from the Browse menu.

4. Double-click the port to use for PPP.

5. Click the Expert radio button in the Detail field.

6. Use the hints in the table below to set options for the port.

   Field	State/Value
   Service Enable	Selected
   Baud Rate	9600
   Initialize Only	Not selected
   Bidirectional	Selected
   Software Carrier	Selected
   Port Monitor Tag	zsmon
   Connect on Carrier	Selected
   Service	/usr/etc/aspppls
   Streams Modules	ldterm, ttcompat
   Timeout (secs)	Never