How to Remove a StorEdge MultiPack Enclosure

Use this procedure to remove a StorEdge MultiPack enclosure from a cluster.This procedure assumes that you want to remove the references to the disk drives in the enclosure.

1. Perform volume management administration to remove the enclosure from the configuration.

   For more information, see your Solstice DiskSuite or VERITAS Volume Manager documentation.

2. Disconnect the SCSI cables from the enclosure, removing them in the order shown in Figure 4-5.

   Figure 4-5 Disconnecting the SCSI cables

   
   

3. Power off, and disconnect the enclosure from the AC power source.

   For more information, see the documentation that shipped with the enclosure and the labels inside the lid of the enclosure.

4. Remove the enclosure.

5. Identify the disk drives you need to remove.

   # cfgadm -al

6. On all nodes, remove references to the disk drives in the enclosure you removed in Step 4.

   # cfgadm -c unconfigure cN::dsk/cNtXdY # devfsadm -C # scdidadm -C

7. If needed, remove any host adapters from the nodes.

   For the procedure on removing host adapters, see the documentation that shipped with your nodes.