How to Remove a StorEdge A5x00 Disk Drive

Use this procedure to remove a disk drive from a disk array. "Example--Removing a StorEdge A5x00 Disk Drive" shows you how to apply this procedure. Perform the steps in this procedure in conjunction with the procedures in Sun Cluster 3.0 System Administration Guide and your server hardware manual.

For conceptual information on quorum, quorum devices, global devices, and device IDs, see Sun Cluster 3.0 Concepts.

1. Determine if the disk drive you want to remove is a quorum device.

   # scstat -q

   If the disk drive you want to remove is a quorum device, remove the quorum device before you proceed. Otherwise, proceed to Step 2.

   Refer to Sun Cluster 3.0 System Administration Guide for procedures on removing a quorum device and putting a quorum device into maintenance state.

2. If possible, back up the metadevice or volume.

   For more information, see your Solstice DiskSuite or VERITAS Volume Manager documentation.

3. Perform volume management administration to remove the disk drive from the configuration.

   For more information, see your Solstice DiskSuite or VERITAS Volume Manager documentation.

4. Identify the disk drive that needs to be removed.

   If the disk error message reports the drive problem by DID, use the scdidadm -l command to determine the Solaris device name.

   # scdidadm -l deviceID

5. On any node connected to the disk array, run the luxadm remove command.

   Physically remove the disk drive, and press Return when prompted.

   # luxadm remove -F /dev/rdsk/cNtXdYsZ

6. On all connected nodes, remove references to the disk drive.

   # devfsadm -C # scdidadm -C

Example--Removing a StorEdge A5x00 Disk Drive

The following example shows how to apply the procedure for removing an StorEdge A5x00 disk array disk drive.

# scdidadm -l d4
4        phys-schost-2:/dev/rdsk/c1t32d0 /dev/did/rdsk/d4
# luxadm remove -F /dev/rdsk/c1t32d0s2

WARNING!!! Please ensure that no filesystems are mounted on these device(s). All data on these devices should have been backed up.

The list of devices that will be removed is:  1: Box Name "venus1" front slot 0

Please enter 'q' to Quit or <Return> to Continue: <Return>

stopping:  Drive in "venus1" front slot 0....Done
offlining: Drive in "venus1" front slot 0....Done

Hit <Return> after removing the device(s). <Return>

Drive in Box Name "venus1" front slot 0
Logical Nodes being removed under /dev/dsk/ and /dev/rdsk:
        c1t32d0s0
        c1t32d0s1
        c1t32d0s2
        c1t32d0s3
        c1t32d0s4
        c1t32d0s5
        c1t32d0s6
        c1t32d0s7
# devfsadm -C
# scdidadm -C