How to Replace a Host Adapter

Use this procedure to replace a failed host adapter in a running cluster. Node A in this procedure refers to the node with the failed host adapter you want to replace. Node B is a backup node.

1. Determine the resource groups and device groups running on Node A and Node B.

   Record this information because you will use it in Step 8 of this procedure to return resource groups and device groups to these nodes.

   # scstat

2. Move all resource groups and device groups off Node A.

   # scswitch -S -h nodename

3. Shut down Node A.

   # shutdown -y -g0 -i0

4. Power off Node A.

   For more information, see the Sun Cluster 3.0 System Administration Guide.

5. Replace the failed host adapter.

   For the procedure on removing and adding host adapters, see the documentation that shipped with your nodes.

6. Power on Node A.

   For more information, see the Sun Cluster 3.0 System Administration Guide.

7. Boot Node A into cluster mode.

   {0} ok boot

   For more information, see the Sun Cluster 3.0 System Administration Guide.

8. Return the resource groups and device groups you identified in Step 1 to Node A and Node B.

   # scswitch -z -g resource-group -h nodename # scswitch -z -D device-group-name -h nodename

   For more information, see the Sun Cluster 3.0 System Administration Guide.