How to Replace a Sun StorEdge T3 Disk Array Chassis

Use this procedure to replace a Sun StorEdge T3 disk array chassis. This procedure assumes that you want to retain all FRUs other than the chassis and the backplane. To replace the chassis, you must replace both the chassis and the backplane because these components are manufactured as one part.

Only trained, qualified service providers should use this procedure to replace a Sun StorEdge T3 disk array chassis.

1. Detach the submirrors on the Sun StorEdge T3 disk array connected to the chassis you want to replace to stop all I/O activity to this Sun StorEdge T3 disk array.

   For more information, see your Solstice DiskSuite or VERITAS Volume Manager documentation.

2. Replace the chassis/backplane.

   For the procedure on replacing a Sun StorEdge T3 chassis, see the Sun StorEdge T3 Field Service Manual.

3. Reattach the submirrors to resynchronize them.

   ---

   Note -

   Account for the change in the World Wide Number (WWN).

   ---

   For more information, see your Solstice DiskSuite or VERITAS Volume Manager documentation.