この手順は、SunPlex Manager GUI を使用しても実行できます。詳細については、SunPlex Manager のオンラインヘルプを参照してください。
クラスタトランスポートケーブルが物理的に取り付けられていることを確認します。
クラスタトランスポートケーブルの取り付け手順については、『Sun Cluster 3.0 12/01 Hardware Guide』を参照してください。
クラスタ内の任意のノード上でスーパーユーザーになります。
scsetup ユーティリティーを実行します。
# scsetup |
「Main Menu」が表示されます。
3 (Cluster interconnect) を入力して、「Cluster Interconnect Menu」にアクセスします。
SCI アダプタを使用する構成では、この手順の「Add (追加)」部分において表示されるアダプタ接続 (ポート名) のデフォルトを受け入れてはなりません。その代わりに、ノードに物理的に (ケーブルで) 接続されている、Dolphin スイッチ上のポート名 (0、1、2、または 3) を指定します。
1 (Add a transport cable) を入力してトランスポートケーブルを追加します。
指示に従い、必要な情報を入力します。
2 (Add a transport adapter to a node) を入力してトランスポートアダプタを追加します。
指示に従って、必要な情報を入力します。
3(Add a transport junction) を入力してトランスポート接続点を追加します。
指示に従い、必要な情報を入力します。
クラスタトランスポートケーブル、トランスポートアダプタ、トランスポート接続点が追加されたことを確認します。
# scconf -p | grep cable # scconf -p | grep adapter # scconf -p | grep junction |
次に、scsetup コマンドを使用して、トランスポートケーブル、トランスポートアダプタ、トランスポート接続点をノードに追加する例を示します。
[ケーブルが物理的に取り付けられていることを確認する] Become superuser on any node and place the node to be removed in maintenance state. # scsetup Select Cluster interconnect. Select either Add a transport cable, Add a transport adapter to a node, or Add a transport junction. Answer the questions when prompted. You Will Need: Example: node names phys-schost-1 adapter names qfe2 junction names hub2 transport type dlpi [scconf コマンドが正常に終了したことを確認する] Command completed successfully. Quit the scsetup Cluster Interconnect Menu and Main Menu. [ケーブル、アダプタ、および接続点が追加されたことを確認する] # scconf -p | grep cable Transport cable: phys-schost-2:qfe0@1 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled # scconf -p | grep adapter Node transport adapters: qfe2 hme1 qfe0 Node transport adapter: qfe0 Node transport adapters: qfe0 qfe2 hme1 Node transport adapter: qfe0 Node transport adapters: qfe0 qfe2 hme1 Node transport adapter: qfe0 # scconf -p | grep junction Cluster transport junctions: hub0 hub1 hub2 Cluster transport junction: hub0 Cluster transport junction: hub1 Cluster transport junction: hub2 |